建立了该钢的高温屈服应力模型。
The high temperature yield stress model of the steel has been set up.
通过对气相流场的分析，选取了雷诺应力模型；
After the analysis of gas flow chacterristic, the RSM model is selected.
采用雷诺应力模型对动态旋流器湍流流场进行模拟。
The turbulent flow field within dynamic hydrocyclone was simulated by means of RSM model.
结果表明，雷诺应力模型对于转捩过程的捕捉能力有限。
The results indicated that Reynolds stress model has certain capability to simulate transition process.
考虑伞衣中线上的子午向应力，得到了一个双轴应力模型。
The meridional stress in the gore centerline is considered, and a biaxial stress model is got.
分析了一类桥式直接耦合柔性机构的精确的刚度和应力模型。
Accurate stiffness and stress models of a class of bridge-type direct coupling compliant mechanism have been studied.
本文将代数应力模型推广应用于具有起伏表面的紊流数值计算。
The algebraic stress model has been used in this paper to calculate the turbulent flow with wavelike free surface.
蔡开科考虑铸坯温度回升，建立了铸坯热-弹-塑性应力模型。
Cai Kaike takes the billet surface reheating into account, and establishes a heat transfer and elastic-plastic stress model.
以现场的钢种为样本，测定热轧条件下的流动应力，建立流动应力模型。
Based on the actual steel grade of production, the flow stress is measured under rolling condition, and the mathematical models are obtained.
湍流模型采用雷诺应力模型，研究对象为U型分离器内的气-固两相流动。
Reynolds stress model is used to serve as a turbulent flow model with the object of study being the gas-solid two-phase flow in a U-shaped separator.
本文采用雷诺应力模型对油料储运设备中动态旋流器内速度场进行数值模拟。
The velocity field of dynamic hydrocyclone of oil storage equipment was simulated using reynolds stress model in the paper.
以70号钢流动应力模型为基础编制了计算线材轧制力能参数的计算机软件；
Steel flow stress model is it calculate for foundation line material rolling strength can the computer software of the parameter to work out with one;
本文采用雷诺应力模型对油料储运设备中动态旋流器内速度场进行数值模拟。
The flow field of dynamic hydrocyclone was simulated using Reynolds Stress Model in the paper.
针对这一问题，修正了亚格子雷诺应力模型的壁面函数，得到了较好的计算结果。
To this end, the wall function of the sub-grid Reynolds stress model was modified to obtain a better result.
目前在相似材料模拟试验中，常采用平面应力模型与平面应变模型两种受力状态。
At present, two stress states — the planar stress and the planar strain are usually adopted in the modeling experiment of the equivalent materials.
提出了组合弹簧分层地应力模型，并推导了相应公式，为分层地应力解释奠定了基础。
In order to complete the single-layer-based stress explanation, we built the single-layer-based stress model in form of combined springs and concluded the involved formulas.
从雷诺应力模型出发，通过求解雷诺平均N - S方程组获得三维湍流流场的数值解。
Based on the Reynolds Stress Model, the three-dimensional flow field was numerically simulated using the Reynolds averaged N-S system equations.
根据弹性力学理论建立了纤维增强金属基复合材料中纤维周围基体中的残余热应力模型。
On the basis of elastic mechanics theory, the micro residual stress expression of matrix around fiber in metal matrix composites is deduced.
本文采用雷诺应力模型计算了水力旋流器的水相湍流流场，计算结果与实验数据吻合很好。
The turbulent flow in a hydrocyclone is predicted numerically using a Reynolds stress model, and the numerical results agree well with experimental data.
此外，本文对溪洛渡高拱坝进行了应力模型试验研究，给出了试验得到的应力、变位结果。
Furthermore, model test of Xiluodu's high arch dam is studied and the. Result of stress and displacement is presented in this paper.
而以往的流动应力模型主要考察变形温度、变形速度和变形程度，对位错密度的研究很少。
In the past years, the models of flow stress were mainly focused on deformation temperature, deformation speed and deformation degree, but seldom on dislocation density.
其中热-化学模型可采用完全耦合的形式求解，而应力模型则可采用单向耦合的形式求解。
The model was numerically solved by FEM, fully coupled for thermal-chemical model and one way coupled for the stress model.
通过分析井筒周围应力场和裂缝应力场，分别建立了井筒周围应力场模型和裂缝的有效应力模型。
Through analyzes around the wellbore stress field and the crack stress field, has established around separately the wellbore stress field model and the crack effective stress model.
最后由纤维应力模型计算纤维对流场的影响，采用稀相纤维附加应力模型，计算了纤维对收缩流场的影响。
The additional shear and normal stress of fiber become large with the addition of the contract ratio. Including the effect of fiber stress, the flow field is recalculated.
采用该模拟软件，可对流动应力模型影响轧制力的程度进行分析，也可对传热模型影响轧制力的程度进行分析。
The simulating software can be used not only to analyze the dependency of the rolling load on flow stress models, but also the dependency of the rolling road on thermal transfer models.
稳态项是金属材料在亚热变形过程中的稳态流变应力模型，而修正项是指流变应力随应变的变化而变化的部分。
The steady state term is the steady flow stress model of metal materials in the semi-hot forming process, and it is a model related to the Z parameter;
采用雷诺应力模型CFD数值模拟方法，对油水分离器内的流动机理和分散油相的流动特点及处理方法进行研究。
Based on the Reynolds stress model CFD numerical simulation method, both flow mechanism and flow characteristics of dispersed oil phase in oil-water separation hydrocyclone were studied.
深入研究了液-液水力旋流器的流动机理，并采用LRR应力模型对油水分离旋流器的油水两相流场进行了数值模拟。
Further investigate the flow mechanism of the liquid-liquid hydrocyclone, and the oil and water phases flow field in hydrocyclone for oil water separation is simulated using LRR stress model.
以加速寿命方程作为应力模型，解决利用不同环境应力下可靠性增长试验数据，求试验结束时设备可靠度的置信下限问题。
In this paper, we analyze reliability growth data from different stress environments. We adopt the accelerated life equations as the stress model and obtain the confidence of the reliability.
以加速寿命方程作为应力模型，解决利用不同环境应力下可靠性增长试验数据，求试验结束时设备可靠度的置信下限问题。
In this paper, we analyze reliability growth data from different stress environments. We adopt the accelerated life equations as the stress model and obtain the confidence of the reliability.
应用推荐