本文建立了装备供应链二级库存管理模型，利用仿真软件实现了模型并进行仿真运行分析。
This paper constructed equipment supply chain two-level stock management model, implemented the model by Arena, ran the simulation model and analyzed the result.
对异步电动机失电残余电压的产生进行分析，建立了异步电动机失电残余电压仿真计算模型，并进行仿真计算。
The generation of the residual voltage for asynchronous motor after AC Dump (RVACD) is analyzed, it establishes the simulation calculation model and carries out simulation calculation.
本文主要在永磁同步电机矢量控制的基础上提出了一种负载扭矩的滑模控制算法，并进行仿真验证设计的有效性。
In this paper, a sliding mode control algorithm based on the PMSM vector control has been proposed, and the effectiveness of the design verified by simulation.
为了提高二值图像的压缩比，采用自顶向下的编码方法，提出一种基于等腰直角三角形的分形图像压缩算法，并进行仿真实验。
In order to improve the ratio of binary image compression, using top-dowm method of coding, bring forward a fractal image compression method based on isosceles right triangle, and simulated.
基于叶尖定时测振原理，对利用速矢端迹法分析叶片同步共振幅值的方法做理论推导，建立叶片同步共振的分析模型并进行仿真。
Theoretical derivation is done to the analyzing method of synchronous blade vibration by using speed-vector-end-tracking method, and so is the computer simulation to measurement process.
该仿真系统可以根据不同的参数设置，合成不同的整车模型，并进行仿真和校验，实现汽车动态模拟驾驶的可视化视景仿真，用来模拟汽车运动情况。
This simulation system can be used to verify models and integrate to a whole vehicle to simulate vehicle's running condition according to different settings.
针对各类对象，分别讨论了基于稳定域最优PID控制器的设计及进一步改进，并进行了大量仿真实验。
The design methods and further improvement of optimal PID controller for these plants are investigated respectively and a lot of simulation experiments are performed.
利用粒子群的优化算法，建立侵彻子母弹最佳抛撒高度的求解模型，并进行了仿真计算。
By using Particle Swarm Optimization (PSO), a model was built up for calculating the optimum dispersion height of intrusive submunition dispenser, and mathematical simulation was carried out.
作者提出低频时码信号的正交扫描解调技术，从理论上分析了正交扫描原理和实现方法，并进行了仿真测试；
The orthogonal sampling demodulating technique for low frequency time-code signal is introduced. Based on the theoretical analysis about its principle and implement method, The simulation is tested.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
A mathematical model is established and validated with computer imitation. The results show that the method can effectively improve accuracy of object position and reliability.
并进行了仿真研究，结果表明，基于稳定性而设计的模糊控制系统不仅具有良好的动态及稳态的性能，而且具有很强的抗扰能力。
The simulation results show that fuzzy control systems which are designed based on the stability have not only good dynamic and steady state feature but also strong rejection ability to disturbances.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
Mathematics model is established, and verified by the imitation of computer. The results show that the method can effectively improve the accuracy and reliability of the position.
最后，基于FPGA技术实现了系统提出的各种功能，并进行了仿真，验证了其设计的合理性和正确性。
In the end, all the proposed functions are realized based upon FPGA technique and the rationality and validity of the design is tested through simulation.
再次，在对轮胎花纹噪声研究的基础上，探讨了道路噪声的发声机理、发声模型及其仿真模型，并进行了仿真实验分析。
Thirdly, the paper has discussed the generation mechanism, acoustic model and the simulation model of the road noise on the basis of the tire pattern noise, and carried out the simulation analysis.
本文提出了绕线式感应电机转子回路电阻的斩波调节原理，设计了双环调速系统，并进行了计算机辅助设计和仿真研究。
This paper presents a chopper adapting principle of rotor's resistance of induction motor, develops a two loops speed governing system, and gives computer simulation results.
提出了数字电液比例系统的数学模型及控制规律，并进行了计算机仿真及实验验证。
Mathematical model and control law of the digital electro hydraulic proportion system are put forward. Furthermore, computing simulation and experimental verification are carried out.
在机械仿真软件ADAMS基础上，用计算机建立了月球微重力环境并进行了数字仿真。
Based on ADAMS mechanical simulation software, a microgravity environment was established by computer and some simulation study had been carried out about the lunar lander.
给出了自适应模糊控制技术的控制规则集、知识库修正方法和控制策略，并进行了系统仿真研究和性能分析。
Provides the control rule sets, methods of revising knowledge base and control strategies and carries on simulation research and performance analysis for the system.
选取3种轧制规程，用三维有限单元法对预紧机架进行了动力仿真，并进行了分析和比较。
Three rolling schedules were selected, dynamic simulations on the preloaded housing of cold ring rolling mill were proceeded with 3d finite element method, the results were compared.
本文应用模糊识别技术，借助模糊集理论提出了一种锅炉能损模式的在线模糊识别方法，并进行了仿真测试。
In this paper, fuzzy recognition technology is applied by means of fuzzy set theory to present an on-line fuzzy recognition method for boiler energy-loss pattern, and simulation test was made.
研究了扩展拉格朗日方法的人工神经网络模型，实现了其电路结构，并进行了仿真实验。
We have investigated artificial neural network models based on an augmented Lagrange method, and accomplished the circuit structure and the simulation experiments.
文中提出了一个无线传感器网络中多传感器管理的应用模型，并进行了初步的仿真实验。实验证明了该模型的有效性。
This paper brings forward a multisensor management application model in wireless sensor network, and proves the validity of this model by primary simulation.
论述了用神经网络中的前向网络BP算法来计算脉冲开关角的一种计算方法，并进行了MATLAB仿真。
This paper discusses about an algorithm of calculating the pulse switch Angle by using of forward network BP algorithm based on the Neural network, and makes the MATLAB simulation.
论述了电力线信道上脉冲干扰的特性，运用概率论推导出存在脉冲干扰时求解敖据帧长度的数学模型，并进行了仿真模拟验证。
This paper discusses the nature of the impulsive interferences with on the power line channels, and presents a model for finding a frame length and a simulated example using probability.
以里程计作为外部传感器，建立了运动状态下初始对准的数学模型，分析了系统状态的可观测性，并进行了仿真研究。
By selecting an odometer as the system's external sensor, the mathematical model for the alignment in the moving state is established and the observability of the system is analyzed.
流域水安全预警模型可以对流域内的水质情况进行预警，作为一个实例，建立了对湘江流域水安全系统预警模型，并进行了模型仿真及其结果分析。
As a application case, the water safety system pre-alarm model of Xiangjiang river basin was set up and the model simulation and the result analysis were carried out.
根据系统这一特点，采用三闭环模糊滑模控制策略，外环为速度和位置闭环，内环为电流闭环的方法设计控制器，并进行了仿真实验研究。
According to all of these characteristics of the system, a three-loop fuzzy sliding control mode is adopted, the speed and position loop are outer loop, and the current loop is inner loop.
针对零阶保持器引起的幅度误差和相位误差，以及D/A转换器有限字长引起的误差进行了较为详细的分析，并进行了D/A误差仿真试验。
This paper mainly describes the amplitude and phase errors caused by zero-order holder and the error caused by finite word length of D/A, and computer simulation test of D/A error is also introuced.
最后阐述了在得到偏航角的估计值后，运用喷气控制来进行动量轮卸载和长期角动量管理，并进行了计算机仿真。
At last, momentum wheel unloading and long-term momentum management are accomplished under the control of thrust after getting yaw Angle estimator and computer simulation is achieved at the same time.
基于船用核动力一体化反应堆结构的需要，建立了新型船用气体稳压器启动充气过程的数学模型，并进行了仿真计算。
Based on the structural requirement of the integrated reactor of shipping power plant, a mathematical model about charging progress of new shipping gas pressurizer is constructed and calculated.
应用推荐