本文对绝对编码法测角原理进行研究的基础上，设计了一种具有发明专利的单码道编码规则，并根据规则制定了相应的软件算法。
In this paper, in studying absolute Angle measurement principle basis designed coding rules of a Single-ring code and formulated the appropriate software algorithm.
将测压原理拓展应用到均匀送、排风管路的设计中，并探析了这种管路的作用机理及计算方法。
Applies the pressure measuring principle to the ducts for even air supply and exhaust, and analyses the function mechanism of such ducts and their application calculation.
提出了一种利用光纤的共振来测微振动的新方法，从理论上阐述了其原理并取得了实验数据。
A new method of measuring micro vibration was put forward based on the principle of optical fiber resonance.
主要介绍了测压法配制混合气的原理、方法，并分析了配制过程中各项误差的控制。
The principle and method of preparation of mixture gas by pressure measure method are mainly presented, and the control method of various errors in preparation is analyzed.
在研究分析了多种互感器校验仪的基础上，论述了三种互感器校验仪测差电路，并对其原理和特点进行了分析。
Based on the principle analysis of various transformer calibrators, this paper discusses three kinds of difference measuring circuits for the calibrator.
阐述了激光在线测长系统的原理，详细介绍激光在线测长系统的方案，并针对几个具体问题加以说明。
The principle and scheme of laser on line length measuring system are introduced inderail, in which several specific questions are countered to be exPlained.
提出了一种利用光纤的共振来测微振动的新方法，从理论上阐述了其原理并取得了实验数据。最后展望了其应用前景。
A new method of measuring micro vibration was put forward based on the principle of optical fiber resonance. The principle was given and some data from experimentation were got.
在此基础上，重点介绍了ZDL8自动测硫仪的工作原理、工作流程、使用注意事项及仪器特点，并通过t检验证明了该仪器的可靠性。
Based on this, the work principle, work process, cautions in use and features of ZDL8 automatic sulfur analyzer are presented in detail and the t testing has proved the reliability of this analyzer.
介绍了国产微波测碳监测系统的原理，并就其在电站锅炉上实际应用方面，提出了一些建设性的意见。
The principle of domestic microwave monitoring carbon system was introduced emphatically and some constructive Suggestions in the field of its practical application to utility boiler has been raised.
研究了基于齿轮测量中心检测凸轮的基本原理，并解决了测量过程中凸轮轮廓线拟合、测头控制策略和补偿等问题。
This paper studies the basic principle of detecting cam based on the Gear Measuring Center, and solves such key problems as cam contour matching, compensation and controlling strategy for the probe.
着重介绍仪器的基本原理、结构性能并推荐测功系数简便易行的测算方法。
This paper presents its principle, structure-and performance, also the simple measuring-calculating method for the power-measuring factor.
本文介绍了液压缸试验台的工作原理，并运用MATLAB对被测缸液压系统进行了动态仿真；
The principium of the test-bed was introduced, and the dynamic simulation of the measured hydraulic cylinder system was made by using application software MATLAB.
分析和确定了电动助力车主要性能的检测项目，并对车速、续行里程、载荷、蓄电池的放电电压和放电电流等被测项目的检测原理及实现方法进行了探讨。
The testing principle and the performing method of testing items such as speed, range, load, discharge voltage and current for electro-hybrid bicycle are described based on deciding the items.
简要介绍了低应变反射波测桩的原理，以及影响检测桩身质量的影响因素，并介绍了在实际工程中的应用情况。
It is introduced briefly that the principles of testing piles by low-strain reflected wave, and the factors influencing the quality of pile shaft as well as its applications in actual projects.
对V带测量项目、测量方法作了介绍并对传动带测长机结构及工作原理作了阐述。
Describe the V belt measuring project and measuring method, privides the structure of the transmission belt length measuring unit and operation principle.
给出了雷达天线的测试理论基础，并分析了电测系统原理。
The article also provides the theoretic basis of measurement, and analyzes the theory of the electrical measurement system.
提出了利用坐标法进行测设既有曲线并应用优化计算的原理进行既有曲线拨距计算。
This paper puts forward the coordinate calculation method, which applys the optimization algorithm to compute the move distance of the current railway curve in order to rebuild the current curve.
论述了动测法检测锚杆工作状态与锚固质量的基本原理，并结合现场实际检测工作，论证了动测法检测的可行性与优越。
The basic principle of testing bolt anchorage and its operating state by dynamic method was discussed in this paper.
本文介绍了这种测尘仪的原理、构造组成；并对采样效率、线性范围、温度影响进行了分析。
This paper describes the working principles and structure of the meter, and analyses sampling efficiency, linear range and moisture influences.
论述了动测法检测锚杆工作状态与锚固质量的基本原理，并结合现场实际检测工作，论证了动测法检测的可行性与优越性。
The basic principle of testing bolt anchorage and its operating state by dynamic method was discussed in this paper. And its feasibility and the advantage was demonstrated by on-site testing result.
本文介绍这种测振法的原理和一些实验结果，并对其应用作简要的讨论。
In this paper, the principle and some experimental results of this method are presented, and a brief discussion about the prospects of its applications is given.
根据瑞利波测试方法与工作原理，对填料为天然砂砾的土基进行了现场测试并对比了传统的承载板法，建立两种方法所测土基模量之间的关系，提出了一些结论。
According to the principium and test method of RayleighWave, contrast carrying-board in locale(natural gravel) , found the regress equation between two modulus of subgraded and draw a conclusion.
介绍了有载分接开关切换波形测试的意义、原理和方法，指出现场测试经常遇到的问题并分析了其原因，提出了根据现场所测波形判断有载分接开关能否正确切换的方法。
To the scheme of mechanical on load tap changer combined with thyristors, its characteristic of arc suppression is analyzed in details, and a corrected scheme is then present.
介绍了有载分接开关切换波形测试的意义、原理和方法，指出现场测试经常遇到的问题并分析了其原因，提出了根据现场所测波形判断有载分接开关能否正确切换的方法。
To the scheme of mechanical on load tap changer combined with thyristors, its characteristic of arc suppression is analyzed in details, and a corrected scheme is then present.
应用推荐