向量投影法是一种对平面机构进行运动分析的图解方法。
The vector projection method is a graphical technique for motion analysis to the plane mechanism.
本文介绍了对双自由度平面多杆机构运动分析的电算程序设计。
Group disconnecting method was used to analyse the program design for the two-degree freedom plane multi-bar mechanism.
采用平面应变有限元方法，对土体运动作用下的被动桩桩土相互作用进行分析。
The pile-soil interaction behavior of passive pile under soft soil movement action was analyzed using plain strain finite element analysis including the plasticity and large strain of soil.
简要介绍了ADAMS动态仿真功能，提出了应用仿真技术对平面机构进行运动分析的方法。
Introducing the dynamic simulation of ADAMS, Bringing forward a method of analyzing the plane mechanism motion using the technology of simulation.
对刚体的平面运动的教学，必涉及“瞬心法”，而现行教材均只论速度问题。
To have to be involved "the method of instantaneous center", for the teaching at motion of plane of rigid body.
作者应用循环水槽和平面运动机构，对五种实用脚蹼推进性能作了国内首例比较试验研究。
Experiments are made on the propulsive performance of five kinds of practical flippers with the circulating water channel and the planar motion mechanism.
基于机器微视觉的MEMS动态测试系统，利用模糊图像合成技术对MEMS的平面微运动特性参数进行提取和分析。
Based on machine micro-vision dynamic testing system for MEMS, the technique of blur image synthesis is presented to exact and analyze in-plane motion characteristic of MEMS devices.
对考虑弹性效应的平面运动弹道进行了研究。
The planar motion trajectory involving elastic effect was studied.
对三种情况下平面运动刚体的动量矩进行了分析和讨论，得到一般形式的动量矩方程。
The moments of momentum of plane motion rigid body in three different situations are analyzed and discussed and general form of equation of moment of momentum is obtained.
深入探讨多体系统离散时间传递矩阵法对平面、间刚体光滑铰多体系统运动响应的研究。
The movement of multi-rigid-body system interconnected by smooth hinge moving in space and plane are deeply studied with the discrete time transfer matrix method of multibody system.
对平面变形的正反向挤压问题建立运动许可的连续速度场并获得上界解析解。
A kinematically admissible continuous velocity field is established and applied to the plane strain in reversible extrusion.
为了对超高速水下航行器实施深度和姿态控制，研究其纵平面运动特性是必要的。
In order to control the depth and the attitude of this kind of superspeed underwater vehicle, it is necessary to investigate the motion characteristics of the vehicle on a vertical plane.
预报采用进退、横漂、首摇和横摇四个自由度的方程，考虑了横摇对水平面运动的耦合影响。
The mathematic model has four degrees of freedom (surge, sway. yaw and roll), taking the couple motion of roll on horizontal plane motion into account.
结论即使在手臂平面自由运动中，肌肉共同收缩对阻抗也有贡献。
Conclusions So that this paper concludes that co-contraction contributes to impedance control even during free upper limb planar movement.
根据运动方程，求得釉浆在搪瓷制品的倾斜平面上薄膜流动方程，以及搪瓷釉浆流变特性参数对薄膜流动的影响。
The expressions for the volume flow rate and thickness of enamel slip film flowing along an inclined plane have been obtained.
对平面变形拉拔问题建立了运动许可的连续速度扬并获得上限解析解。
A kinematically admissible continuous velocity field is established and applied to the plane strain due to drawing, and the upper-bound analytical solution is obtained.
利用图像处理方法对MEMS谐振器做扫频和扫压测量，获得了MEMS器件的平面微运动特性，并对测量结果进行了分析和讨论。
Image processing method is used to carry out frequency sweep and voltage sweep measurement. The in-plane motion characteristic of MEMS is obtained and the testing results are analyzed and discussed.
该算法对摄像机的运动没有约束，且平面模板易于制作，与通常的模板标定算法相比，该算法更灵活—无须匹配图像点。
This algorithm is not stringent to the camera's motion and is more flexible, for it doesn't need matching points between images.
本文从纯运动学的角度，对一种平面双梯形转向机构的杆长参数进行了最优化设计，得到了最优值，并将结果与原设计数据进行了比较。
This article presents an optimized design for the parameters of the bars of a plane di - trapezoidal steering mechanism from the aspect of kinematics, with the optimum values obtained.
对履带式移动机器人的平面运动进行了运动学分析，采用滑移转向方法对履带式移动机器人转向进行了动力学分析。
The planar motions of the tracked mobile robots are analysed in Kinematics, and skid steering has been adopted to analyse the steering of robots in dynamics.
本文主要针对平面变胞机构，对其进行了实现间歇运动的尺度综合、运动学分析和动力学研究。
Aiming mainly at the planar metamorphic mechanisms, this thesis has carried on some research in size synthesis, kinematic and dynamic analysis of the mechanisms.
目的研究人体上肢对前方平面不同区域目标点的拾取运动特性和工效。
Objective to study pointing movement characteristics and ergonomics when human upper limb touches different targets on the front board.
提出了一种利用平面解三角，并结合辐射源信号到达方向和脉冲到达时间差对运动辐射源进行单站无源定位的算法。
An algorithm used trigonometry to passively locating a moving emitter with direction of arrival (DOA) and time difference of arrival (TDOA) of the emitter signal is given.
修正环型抛光机用于超精密平面抛光，并对沥青抛光进行了运动学分析。
The conditioning ring polishing machining is used for ultra-precision planarization; and kinematical analysis on pitch polishing is carried out.
重点对高精度光学平面浮动连续抛光法从抛光运动学角度出发做了理论上的探讨与分析，进行了相应的公式推导。
We stress on analysing and discussing theory for continuous floating polish method from viewpoint of polishing kinematics and deduces relative formulas.
该方案只使用平面反射镜，对于运动部件的精度要求比较低，对倾斜、磨损等不敏感。
This method requires only plane mirrors, and it is immune to tilt, wearing etc.
对平面七杆机构运动链进行型综合，提出四种基本运动链和四种衍生运动链。
Based on type synthesis of the planar seven-bar kinematic chain, this paper put forward four kinds of basic kinematic chain and four kinds of derived kinematic chain.
通过进一步对驱动单元进行结构分解，得到平面六杆机构及三杆四副支链等基本运动链。
Further structural decomposition of the driving unit, several planar six linkage and three bar four kinematic pair branch chains were gotten.
最后运用运动学及动力学分析软件ADAMS对平面变胞机构进行了比较深入的运动学及动力学分析。
Furthermore, the thorough kinematic and dynamic analysis of the mechanisms is carried on by software ADAMS.
最后运用运动学及动力学分析软件ADAMS对平面变胞机构进行了比较深入的运动学及动力学分析。
Furthermore, the thorough kinematic and dynamic analysis of the mechanisms is carried on by software ADAMS.
应用推荐