双油缸、精密四柱自动平衡连杆结构,保证每一个裁断位置深度完全相同。
The double oil cylinder, precise four-column automatic balancing connection rod mechanism can guarantee all cutting positions have the same depth.
双油缸、四柱自动平衡连杆结构,保证每一个裁断位置裁断深度完全相同。
Double cylinder four-pillar automatic balance construct, guaranteeing the same depth of each cutting point.
双油缸、精密四柱自动平衡连杆结构,保证每一个裁断位置裁断深度完全相同。
Double oil cylinder and precise four-column automatic balance connecting rod structure, which can guarantee the absolutely same cutting depth of each cutting position.
双油缸,精密四柱自动平衡连杆结构,保证每一个裁断位置裁断深度完全相同。
Double hydro-cylinders and accurate 4-column automatic balanced connecting-rod structure make sure every cutting position and cutting depth are the same.
采用双油缸、四柱导向,自动平衡连杆机构,保证每一个裁断位置的裁断深度完全相同。
With double oil cylinders, four-column guide and automatically balancing link rod structure to ensure the completely same cutting depth of each cutting position.
采用双油缸,四柱导向,自动平衡连杆结构,保证每一个裁断位置的裁断深度完全相同。
With double oil cylinders, four-column guide and automatically balancing link rid structure to ensure the completely same cutting depth cutting position.
首次推导出具有弹性元件的弹性连杆机构动力学方程,从理论上阐述了此平衡方法的有效性。
The dynamic equation of elastic linkage with compliance elements is derived for the first time and the validity of new balancing method is discussed.
本文介绍了一种四连杆变幅机构平衡重系统的优化设计方法。
This paper introduces an optimal method for designing the weight-balance system of the four-link luffing mechanism.
在图1-4中,曲轴实际上由以下不同的部分组成,它们分别是:主轴承轴颈、连杆轴颈、曲轴臂、轴承、平衡配量(?)以及飞轮端。
The crankshafts shown in Fig 1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.
为了保持发动机的良好平衡,连杆和连杆盖都要精心配套。
To maintain good engine balance, connecting rods and caps are carefully matched in sets for engines.
本文提出一种计算曲柄连杆机构参数偏差对内燃机平衡性能影响的方法。
This paper provides a method for calculating the influence of parametric deviation of crank gear on balancing quality of internal combustion engines.
在造型基础一动态模型设计的教学中发现,很多同学设计的动态模型采用了连杆平衡铰链机构。
We have found out in the teaching of the modeling foundation - dynamic model design that a lot of students design dynamic models using the connecting - rod - balanced hinge mechanism.
在分析摩托车发动机曲柄连杆机构不平衡力的基础上,结合国内和国外的实践,总结了摩托车单缸发动机的基本平衡方法。
Based on analyzing the unbalanced force of crank-connecting rod mechanism, this paper describes the balance of motorcycle single-cylinder engine according to practices home and abroad.
采用四柱式双寻向和曲柄连杆同步平衡机构,保证冲裁区域受力均匀。
Four-column type double-direction guiding and crank connecting rod synchronized balance mechanism are adopted to guarantee equal force in the cutting area of machine.
游梁平衡抽油机由于其自身结构特点,在运行过程中,连杆上接头与横梁连接部分经常会出现振动和响声。
As its structure character of beam pumping unit, vibration and noise happen on the joint of connection rod head and beam during operation.
对两个含有高级齿轮连杆基本杆组的齿轮连杆机构采用质量流和派生转动惯量流的思想进行惯性力和惯性力矩完全平衡。
Completely balance the shaking force and shaking moment of two geared linkages with high-ranking geared linkages groups by the method of mass flow and derivative moment of inertia flow.
根据静态平衡理论分析研究了连杆滚轮式水力自动翻板闸门的静态稳定性。
So the hydraulic automatic tilting gate with connecting lever and rolling wheel can ensure the stability of itself.
本文探讨对平面连杆机构进行综合动力平衡的方法。
The paper deals with the synthetical dynamic balancing of the plane linkage.
本文提出了多环空间连杆机构摆动力完全平衡的单位向量法。
This article presents the unit vector method for the full shaking force balancing of multi-loop spatial linkages.
提出了通过在连架构件上附加质量配重实现空间连杆机构摆动力近似平衡的方法。
A practical method for approximate shaking force balancing of spatial linkages is proposed by attaching counter weights to frame pivoted links.
结合实际的汽车行李箱盖开闭设计,简述连杆平衡铰链机构设计的模仿、借鉴思路。
This paper Outlines how to borrow ideas from the real - world automobile trunk lid opening and closing design to perform the connecting - rod -balanced hinge mechanism design.
这种抽油机以连杆式换向机构取代原有的十字滑块式换向架,以重块平衡代替气平衡,并改进了导向系统。
The new unit uses the pitman reserse mechanism instead of the crosshead slide reverse rack, adopts weight balancing instead of air balancing, and is provided with an improved guiding system.
开发了一种曲轴连杆液压马达新型倾侧力矩全平衡面配流机构、相应的试验台以及配套机理研究装置。
A new design of end plane flow distribution pair is presented, which can balance the tilting moment of the distributor completely. Its experiment apparatus and devices are also developed.
本文采用附加扭转弹簧的方法对国内某一型号的喷气织机四连杆打纬机构进行动平衡优化,取得了良好的效果。
The method of add-on torsional spring is used in this paper to optimize the dynamical property of air-jet loom, and the good effect is achieved.
本文在弹性机构动力平衡的实验研究方面进行了有益的尝试,采用附加冗余驱动的办法,首次对弹性连杆机构的动力平衡进行了实验研究,取得了一定的成果。
The dynamic balancing of elastic mechanisms is investigated by redundant drives through experiment for the first time in present study. Some achievement has been made in the dissertation.
其基本思路是利用质量矩替代将平面连杆机构摆动力完全平衡问题,简化为二副构件的质量矩替代和平面开链的摆动力完全平衡问题。
The basic thought is that the shaking force complete balancing of planar linkage is reduced to the mass moment substitution of two pairs link and planar open chains.
本文提出一种能完全平衡平面连杆机构摆动力矩的简便方法。
This paper presents a new, simple method for the complete shaking moment balancing of planar n-bar linkages caused by inertia but excluding external loads.
采用动力松弛法求解各吊索长度离散点所对应的连杆机构平衡构型,从而实现提升过程的模拟。
The Dynamics Relaxation method is adopted to find the equilibrium configuration corresponding to each discrete control parameter point, so that the erection process can be simulated.
采用动力松弛法求解各吊索长度离散点所对应的连杆机构平衡构型,从而实现提升过程的模拟。
The Dynamics Relaxation method is adopted to find the equilibrium configuration corresponding to each discrete control parameter point, so that the erection process can be simulated.
应用推荐