简化平行机构设计，结构简单，重量轻巧。
Simplify parallel mechanism to make structure simple and light weight.
允许平行开发以及管理来自不同分支机构的合并。
Allow parallel development and manage merging from branches.
利用平行四边形连杆和齿轮的组合设计了一种外骨骼机构。
A new type of exoskeleton mechanism has been developed by combination of parallelogram link and gear.
分析了平行对称曲柄滑块机构由于两侧机构的不对称性而引起的防卡可靠性。
The reliability of the parallel symmetric crank and block mechanism caused by the non symmetry of the two mechanisms is analyzed.
本文介绍了几种大分度角平行分度凸轮转位机构的结构原理与设计要点。
In this paper, the principle of structure and key to design for some parallel indexing CAM mechanisms with large indexing Angle was introduced.
介绍一种确定平行分度凸轮机构凸轮轮廓的有效设计思路和分析方法。
A kind of effective thought of design and method of analysis for determining the CAM profile of parallel indexing CAM mechanism was introduced.
当L形下摆臂、上摆臂、套筒支架和车架组成平行四杆机构时，双摆臂联动悬架能够保证车辆在行驶过程中具有较高的行驶稳定性。
A parallelogram linkage mechanism composed of L-shaped lower swing arm, upper arm and bushing support frame ensures travel stability of the forklift.
其平移机构由两平行连杆、摆臂及机架组成。
The translation mechanism consists of two parallel link rods and one rocker.
自动串簧组装机平行放置在自动送料机的传送机构边上。
The automatic string spring assembling machine is placed on the transmission mechanism of the automatic feeding machine in parallel.
提出了双作用式平行分度凸轮机构，并按研究齿轮啮合的方法研究其凸轮廓线。
This paper proposes double action parallel indexing CAM mechanism, and studies cams profile by methods used in gear meshing.
本文提出了具有平行四连杆仿形机构的精密播种单体的数学模型，并使用该数学模型对精密播种单体作了动力学分析。
The mathematical model of the precision drill unit with parallelogram linkage was brought up and its dynamic behaviors were analyzed with this mathematical model.
双作用式平行分度凸轮机构对速比曲线的几何形态有特殊要求，这使得该机构的速比不能从同类机构现有运动规律中得到，而必须经过特殊设计。
The speed-ratio curve of double-action parallel indexing cam mechanism has special property in shape, which makes it is not available from present transmission function, but designed purposely.
双平行、平移模机构，中心锁模，平衡受力，移动迅速，到位平缓。
Two parallel, the mould organization of translation, the centre locks the mould, balance the strength of receiving, move rapidly, put it in place gentlely.
根据对用于镗孔加工刀具补偿的微位移技术的分析以及对柔性铰链机构的研究，研发了一套具有自主知识产权的平行四边形弹性镗杆结构的镗孔刀具微量补偿装置。
Based on the research on micro movement and elastic gemels, a boring cutter micro compensation device amounted on the parallelogram elastic boring rod is developed with self owned intelligence right.
执行机构可以用作交叉或平行安装，不需要进一步改装。
Actuator can be used for Cross or Parallel mounting without further modification.
提出了一种新型2 -DOF平面并联定位机构，它由直线电机直接驱动含有平行四边形支链的并联杆机构来实现末端平台平面内的平动。
A novel 2-dof precision positioning mechanism consisting of two parallelogram chains drived directly by linear voice motors was presented.
文中对机床的平行约束机构进行了分析，求出了机床的运动学逆解方程。
Its restriction mechanisms has been analyzed. Solution of the inverse position problem has been obtained.
通过建立拼接运动规律的数学模型，论述了模切机输纸机构中平行分度凸轮运动规律的拼接方法。
By establishing the mathematical model of motion curve combination, this paper discusses the combination methods of parallel-indexing-cam curves in paper-feeding mechanism of die-cutting machine.
为验证本法的正确性，文中举出平面平行四杆机构的一个计算实例。
An example demonstrating the correctness of his method which deals with a planar parallogram 4-bar mechanism is included.
自动开关门功能是采用反平行四边形机构实现的，针对这一机构的运动特性及力学性能进行了分析并得出最佳的运动方案。
Automatic opening function is realized by contra - parallelogram mechanism. Optimal kinematic scheme is obtained by the kinematic and mechanical analysis of the contra-parallelogram.
本文通过拼接运动规律在平压模切机输纸机构中的应用原理的论述，介绍了一种平行分度凸轮机构设计软件的原理。
This paper discusses the principle of combination cam curves and its application in the paper feeder of die-cutting machine. It introduces the fundamentals of a parallel indexing cam design software.
该拍动机构采用平行四边形连杆机构使安装在尾鳍架上的机构鱼的尾鳍作周期 性的平移运动。
The flapping mechanism adopts a parallel quadrilateral connecting rod mechanism to lead the tail fin of the robotic fish arranged on a tail fin frame to make periodic translational motion.
建立了球形防自转机构的模型，分析了其工作原理，将球形防自转机构简化为平行四连杆机构。
A mechanical mode1 of anti-rotation mechanism with balls was established, and its operation principle is analysed, where the con-figuration of simplified parallel four-connecting rods was employed.
为了实现道路除雪的机械化，本实用新型采用双曲柄型平行四杆机构作为工作机构。
In order to realize the mechanization of snow removal on roads, the utility model USES a double-crank type parallelogram linkage as a working mechanism.
建立了含有虚约束的多相并列平行曲柄机构受力分析模型。在此基础上分析计算了三环减速器的轴承载荷和高速轴曲柄上的转矩；
The load of planetary bearings and the moment in the high speed shafts are analyzed and some suggestions about the structure type and design parameters of the three ring reductor were a…
建立了含有虚约束的多相并列平行曲柄机构受力分析模型。在此基础上分析计算了三环减速器的轴承载荷和高速轴曲柄上的转矩；
The load of planetary bearings and the moment in the high speed shafts are analyzed and some suggestions about the structure type and design parameters of the three ring reductor were a…
应用推荐