算列表明优化设计比常规设计节省生产成本。
The practical example shows the cost of optimum design is less than that of the conventional design.
常规设计方法只考虑了其中一个或几个因素的影响。
The conventional design method only considers one or several factors.
最后简要介绍了集肤电伴热方法的常规设计程序与优化设计。
Finally, the article briefly introduces the routine design procedure and optimum design of skin-effect electric-heat method.
数值结果表明，常规设计下结构的疲劳寿命可靠度偏于危险。
Numerical results show that the fuzzy reliability analysis of fatigue life tends to provide more safety than traditional analysis does.
这种方法克服了常规设计中，工作平稳性精度选择的局限性缺点。
This method overcame the restriction in the accuracy selection of work smoothness in conventional design.
介绍透明罩常规设计的不足之处以及逆向思维引发的设计新思路。
The disadvantages of general design to transparent cover, as well as the new design thought led by converse design are introduced.
本文系统地分析了按常规设计步骤得到的111系列检测器的时序。
In this paper the 111 train detector derived by common design method has been analyzed systematically.
减速器常规设计常忽视设计的优化问题，使得机构自重大，成本高。
The conventional design of the reducer usually neglects the optimization, which makes the reducer itself heavy and costly.
根据此设计思想，其设计程序、执行时间约为常规设计的十分之一。
According to this idea, the runtime almost equals to tenth of common runtime and this method is useful.
迈凯轮在中国也有一个新的扩散器，但它仅仅是一个常规设计的扩散器。
McLaren also has a new diffuser in China, but it is merely a development of its conventional design.
与常规设计的蜗轮相比，在同样载荷作用下，轮齿可产生较大的弯曲变形。
Compared with a worm gear conventionally designed, the flexible-tooth worm gear can bend and deform largely under the same load.
结果表明，低比转数蜗壳泵不宜采用常规设计，进而提出了一种新的设计方法。
The results reveals that the conventional design is not suitable for designing a very low ns volute pump and a new design is presented.
在膜系设计方面，本文提出了常规设计方法与遗传退火方法相结合应用的新思路。
In the aspect design coating system, a new idea to combine the general way and the simulated annealing genetic algorithms (SAGA) is brought forward.
并应用实例设计，分析了常规设计法和随机应力强度曲模糊可靠性设计法的区别。
The difference between the common design method and the fuzzy reliability design method of random stress intensity is analyzed by means of a case study.
计算结果表明，运用非线性理论求得的最大应力比常规设计要小15 ~ 20%。
The calculate data show that the maximum normal stress given by the nonlinear method is 15-20% less than that by linear one.
脱硫吸收塔结构及荷载形式复杂，常规设计计算方法不能给出其应力和变形分布情况。
The structure and load form of the absorbing tower is complex and regular design and calculation method cannot give its distribution condition of the stress and deformation.
采用任意中弧线叶片造型程序，将某单级跨声、常规设计的风扇改进为复合掠形设计。
An arbitrary airfoils blade design procedure was adopted to redesign a transonic fan with compound swept.
描述了外啮合修缘插齿刀和修缘齿轮的齿形，分析了按常规设计修缘插齿刀存在的问题。
This paper describes the tooth forms of an external toothing and chamfering gear shaping cutter and chamfering gear shaper cutters designed by old routine.
应根据不同设计使用年限活荷载的超越概率等于常规设计荷载超越概率的原则确定活荷的载标准；
The live load should be determined that the exceedance probabilities of live load for different design working life equal to that for conventional design loads.
在常规设计中，长期以来一直沿用等安全系数法，只考虑到构件足够的强度，无法解决可靠性问题。
It only considers if the members have enough intensity but can not solve the problem of reliability while selecting the wall thickness of pipeline by safety factor method in general designing.
采用该方法，虽然舍弃了由位置传感器构成位置回路的常规设计方法，但情报雷达伺服系统仍然有较高的定位精度。
Although the general design method of the position loop composed of the position sensor is abnegate, but the information radar servo system has high orientation precision in this way.
二是设计计算模块，利用该模块可以对不同化工单元操作设计（常规设计或优化设计），选择适宜的算法进行设计计算。
The other is design calculation module used to conventional design or optimum design for chemical unit operation . The suitable algorithm was presented according difference model and design task.
文章描述了空气溢流系统的基本概念和其常规设计，并对GL所提出的闭式燃油溢流系统及其相关的阻力计算进行了分析。
The paper describes the concept of air system, overflow system, and its standard design. It also analyzes the closed fuel overflow system proposed by GL as well as relevant resistance calculation.
大型预应力钢筋混凝土储煤筒仓结构新颖，受力复杂，其直径超出了筒仓规范规定，无法按常规设计方法对其进行结构计算。
Due to the complex structure and large diameter of the RC silo of containing coal, it is impossible to analyze it with traditional design method.
来自巴西的两个兄弟已经通过他们的声誉自由的思想鼓舞人心的设计，同时打破规则，创造自1990年的非常规设计作品。
The two brothers from Brazil have made their reputation through freely thinking inspirational designs while breaking the rules and creating unconventional design pieces since the 1990's.
对民用建筑设计中出现的防火间距非常规设计问题进行了实例分析探讨，按照具体问题具体分析的方法，提出了一些处理意见。
Based on a real case study, the article analyzes the problems in the non-conventional design of the fire separation in the civil building design.
本文在分析SIP软终端常规设计思路和相关技术的基础上，借鉴分层设计思想和MVC设计模式确定了本软终端的设计思路。
Based on analyzing conventional SIP soft terminal design and related technologies, this paper brings out the design principle by using the reference of layer design and MVC design pattern.
拱形屋面结构单层空旷建筑的基础偏心距较大 ，用常规设计方法基础面积过大 ，使这种结构在实际工程中的应用受到限制。
Large eccentricity of foundation of the long span building with arch roof makes the bottom area of foundation so large that it cannot be unrestricted adopted in practice.
给出了气化炉被控对象和控制器同时摄动时的非脆弱鲁棒性能设计概念，解决了常规设计不能保证系统具有非脆弱鲁棒性的问题。
The design concepts of the non- fragile robust performance of the system with the perturbations of the controlled members and the controllers are presented.
给出了气化炉被控对象和控制器同时摄动时的非脆弱鲁棒性能设计概念，解决了常规设计不能保证系统具有非脆弱鲁棒性的问题。
The design concepts of the non- fragile robust performance of the system with the perturbations of the controlled members and the controllers are presented.
应用推荐