将虚拟样机技术应用于机电产品电缆布线问题，提出了虚拟布线方法。
Virtual wiring is presented by adopting virtual prototyping technology in the problems of electro-mechanical product cable wiring.
两层通道布线问题在超大规模集成电路自动布图设计中是关键步骤之一。
Two-layer channel routing is one of the key steps in the automatic layout design of VLSI chips.
其它EMF降低步骤，如校正一个普通的布线问题，为安全的原因是值得考虑的。
Other EMF reduction steps, such as correcting a household wiring problem, are worth doing for safety reasons.
然而几乎所有的布线问题都被证明是NP完备问题，目前还没有一个十全十美的布线算法。
However, almost all routing questions are proved to be NP difficult questions and there are no perfect routing algorithms.
本文正是在这样的背景下对VLSI电路物理设计中的详细布线问题展开了一些研究工作。
Under this background the dissertation is intended to develop some algorithms for VLSI physical design detailed routing.
利用布线问题与迷宫问题的相似性， 将解决迷宫问题的方法用于解决布线问题，从而保证较高的布通率并且容易实现。
With the comparability of routing question and maze question, using the solution of maze question to solve routing question can make the routing algorithm easy to realize and to succeed in routing.
如果活动路径与首选路径不同，就很可能存在布线、分区或硬件问题。
If the active path is not the same as the preferred, most likely there is a cabling, zoning, or hardware problem.
综合布线对于新办公楼来说最经济的，但是对于已建好的办公楼而言存在技术上的挑战和高成本的问题。
Structural cabling is most cost efficient in new facilities but it becomes technically challenging and cost prohibitive in existing facilities.
布线的问题可以是重要的网络停机的原因。
Cabling problems can be the cause of significant network downtime.
家居控制网络正在逐步以无线技术取代传统的有线技术，避免了布线与设备添加带来的繁琐问题。
Home Control Network (HCN) is adopting wireless technique instead of traditional wire technique, which can avoid the problems caused by wiring and adding new devices.
高速混合PCB的电磁兼容性设计首要解决合理安排布局布线和接地问题。
The problem of reasonable layout wiring and grounding is firstly resolved in design of EMC for PCB with high-speed and digital and analog mixed signals.
通过一个具体的工程案例，阐述了可视对讲系统的设计方案、系统配置及系统布线和系统布管问题。
Through a specific project case, the design program, system configuration, system cabling and system tubing of the visual inter-conversation system were introduced.
最后提出了用户电路板中印制板电源、地线布线设计时应注意的问题。
Finally, it indicates the problems to which one should pay more attention when designing power and ground wire in Subscriber Circuit Board.
四通孔布线算法用于实际MCM布线时，需要解决最大加权不相交匹配问题。
For the Four Via routing algorithm used in MCM routing, the maximum weighted non crossing match problem should be solved.
采用硅化物阻挡层和A1多层金属布线方法，解决了欧姆接触和铝的电迁移问题。
And by the means of silicide, resist layer and aluminium multilayer metal lines, the questions of ohmic-contact and A1 electron mobility are resolved.
因此，在多层布线时，减少通孔数是一个十分重要和迫切需要解决的问题。
Thus, in multi-layer routing, to reduce the number of vias is an important and urgent problem to be addressed.
讨论了多电源网保持共平面布线所需最少馈电压焊块问题。
The Problem of minimizing the number of Power Pad is discussed in this Paper, in order to guarantee the existence of a Planar routing of multiple Power nets.
大马士革工艺是一种新兴的金属布线技 术，该技术存在较为突出的是通孔填充问题。
The Damascus Process is a new wiring technology having problem of filling through hole.
现代建筑物规模庞大，如何减少布线成本和降低信号衰减已成为模拟音频广播系统中非常棘手的问题；
Secondly, due to the existence of huge modern buildings, how to reduce the wiring cost and decrease the signal attenuation in analogue audio broadcast system is a troublesome problem.
笔者阐述了智能建筑的定义、智能建筑建设中的布线系统、系统集成中存在的主要问题，以及对这些问题处理的着法和一些建议。
The paper tells the definition of IB, GCS of IB, and some questions about integrated system, and gives some views on the questions and some advices.
本文就高校图书馆建筑综合布线设计理念以及布线设计中的若干问题作了分析和探讨。
The design conception and some design details of the comprehensive wiring system inside the university library building is analyzed and discussed in the paper.
元器件和PCB板的参数、元器件在PCB板上的布局、高速信号的布线等因素，都会引起信号完整性问题，导致系统工作不稳定，甚至完全不工作。
The problem caused by some factors such as parameters of devices and PCB, layout of devices on PCB and trace of high-speed signal, etc results in the unstable or even none operation of system.
系统越来越复杂，布线密度越来越大，数据传送速率越来越高速，这些都使得高速电路设计中的信号完整性问题逐渐成为设计者关注的焦点。
The high-speed circuit designers focus more and more on the signal integrity because of the more complicated systems, higher rout densities and higher data throughout etc.
对22型客车翻新改造过程中电线电缆的选型进行了分析，指出了22型客车布线时应注意的问题。
The model selection of wires and cables in the renewing and reforming process of 22 type passenger cars is analyzed, and points for attention in wiring are pointed out.
如果芯片有问题，应该直接研究金属层来察看电路，而对于聚焦离子束系统则应该重新布线。
If there was a problem with the chip, you could probe the metal directly to watch the circuitry, and, with a focused-ion-beam system, you could even rewire it.
针对这一问题，本文结合了人机交互和人工智能的方法，深入研究了三维虚拟线缆布线技术。
To solve this problem, this paper combines the methods of human-computer interaction and artificial intelligence, intensive studies three-dimensional virtual cable wiring technology.
并且，研究了高速电路设计所涉及的如信号完整性和电磁兼容性问题，并在其指导下根据原理图进行了PCB设计，重点攻克了低成本架构带来的布局布线困难。
Moreover, high speed circuit design such as signal integrity and electromagnetic coexist is researched and PCB is designed on schematic. PCB layout and route are mainly solved in PCB design.
第五章是电路的抗干扰性设计，包括元件种类的选择、PCB设计电路布线上需要注意的问题。
The chapter five gives the low-noise design techniques of PCB, from choosing the type of components to layout of the circuit.
提出了电子设备电缆布线设计的基本方法，并提出了通过电缆布线设计解决电磁兼容问题的方法。
Put forward the essential method of electronic equipment cable arrangement design, and put forward the essential method of solving electromagnetic compati…
提出了电子设备电缆布线设计的基本方法，并提出了通过电缆布线设计解决电磁兼容问题的方法。
Put forward the essential method of electronic equipment cable arrangement design, and put forward the essential method of solving electromagnetic compati…
应用推荐