采用差示扫描量热仪研究了合金的熔化特性。
利用差示扫描量热仪对杂化材料的固化动力学进行了研究。
The kinetic curing reaction of hybrid materials performs by differential scanning calorimetry (DSC) technique at different heating rate.
最后，通过红外光谱仪、差示扫描量热仪，对接枝物结构进行表征。
Structural Characterization of graft polymer was performed by Infrared spectrograph and differential scanning calorimeter.
介绍了四种差示扫描量热仪温度标准物质的研制过程及所取得的研究成果。
The development of four standard reference materials used for calibrating differential scanning calorimeters and the results obtained are introduced.
通过差示扫描量热仪（DSC）测定了合金细化前后的升温曲线和降温曲线。
The heating curves and the cooling curves before and after addition of refiners have been studied by differential scanning calorimeter (DSC).
利用差示扫描量热仪和动态流变仪对米粉和米淀粉体系的回生特性进行了研究。
The retrogradation characteristics of rice flour and starch system were studied by dsc and dynamic rheometry.
用差示扫描量热仪与扭辨分析检出了四氟乙烯-六氟丙烯共聚物熔体中的转变。
The transition in the melt of FEP copolymer was detected by differential scanning calorimeter and torsional braid analysis techniques.
本文用差示扫描量热仪测量得到不同湿基水分含量的草莓汁的玻璃化转变温度。
The glass - transition temperature of strawberry with different water content are measured using DSC.
利用动态流变仪和差示扫描量热仪等手段探讨了浸泡发酵对米粉体系理化特性的影响。
The effects on the physicochemical properties of rice flour by soaking fermentation were studied by Dynamic Rheometry and DSC.
采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
采用差示扫描量热仪（DSC）分析了原淀粉和羟丙基淀粉的糊化过程中的热力学性质。
The thermal properties of all the starches during pasting were analyzed by performing DSC.
通过偏光显微镜（PLM）和差示扫描量热仪（DSC）对MB的成核效果进行了表征。
The influence on its crystallization characteristics was also investigated by using PLM and DSC.
用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
利用差示扫描量热仪实验研究了几种不同石蜡以及它们的混合物和多元醇二元体系的储热性能。
The thermal storage performances of several kinds of paraffin mixtures and polyalcohols binary systems were studied experimentally by differential scanning calorimeter.
用差示扫描量热仪和动态流变仪对不同水分含量的大米淀粉糊化、短期回生和长期回生特性进行了研究。
The effects of different water content on the gelatinization, short-term and long-term retrogradation of rice starch were studied.
以差示扫描量热仪(dsc)研究凝胶中水的状态及氯化钾、氯化钙对大豆蛋白凝胶中“三态水”的影响。
The state of water in soy protein gel was studied by differential scanning calorimetry (DSC) and the effect of potassium chloride, calcium chloride on the state of water of SPI gel was discussed.
采用差示扫描量热仪dsc研究了复合成核剂hca - 1对聚对苯二甲酸丁二醇酯pbt结晶性能的影响。
The influence of composite nucleating agent HCA-1 on the crystallization of PBT was investigated by means of DSC.
叙述了差示扫描量热仪(DSC)在橡胶组分分析，橡胶配合剂的选择，橡胶的质量评价等橡胶配方研究中的应用。
Application of differential scanning calorimetry (DSC) to analysis of composition, selection of ingredients and evaluation of quality etc of the compounds were related.
以原位复合方法合成的稀土发光聚己内酰胺（PA6）为研究对象，用差示扫描量热仪（DSC）研究了其结晶行为。
The crystallization behavior of rare-earth luminous polycaprolactam(PA6) prepared through in-situ polymerization was investigated by DSC.
目标化合物经IR，1HNMR和元素分析仪确证了分子结构，运用差示扫描量热仪（DSC）测定了液晶相态温度范围。
The structure of the liquid crystal compound was confirmed by IR, 1HNMR and elementary analysis. The phase transition temperature of it was measured by DSC.
测定固相反应动力学的方法很多，其中利用微机化差示扫描量热仪动态法测定动力学参数是一种省时省力操作方便的方法。
There are many methods for the determination of solid reation kinetics. Among them, dynamic determination of kinetic parameters by computerized DSC is a time and labour saving and convenient method.
采用差示扫描量热仪（DSC）研究了离聚物苯乙烯-丙烯酸钠对聚对苯二甲酸乙二酯（PET）的结晶行为及熔融行为的影响。
The effect of ionomer styrene-sodium acrylate(SAA-Na) on the crystallization and melting behaviors of polyethylene terephthalate(PET) was investigated by using differential scanning calorimetry(DSC).
采用差示扫描量热仪（ DSC）研究了升降温过程中直链淀粉晶体的变化以及加热温度对大米淀粉中直链淀粉结晶形成的影响。
The change of amylose crystals in different thermal process and the effect of gelatinization temperature on amylose crystallization of rice starch were studied by DSC.
采用差示扫描量热仪(dsc)和热失重分析仪(TGA)研究了环氧沥青的固化行为，玻璃化转变和热稳定性，并与纯沥青进行了比较。
The cure behavior, thermal stability and glass transition behavior of epoxy asphalts were investigated by using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA).
利用激光粒径分布仪、扫描电镜、差示扫描量热仪（DSC）和傅立叶转换红外光谱仪分别研究了微胶囊的粒径分布、表面形态、热性能和壳结构。
The diameter distribution, surface morphology, thermal properties and structure of the microcapsules were investigated by means of laser particle size analyzer, SEM, DSC and FT-IR, respectively.
采用偏光显微镜(PLM)、差示扫描量热仪(dsc)、毛细管流变仪和拉伸试验机对透明聚丙烯(PP)的结晶形态、热学、流变性、力学性能进行了研究。
In this paper, the crystalline morphology, thermology, rheology and mechanical properties of clarified PP are investigated by PLM, DSC, Rheometer and stretch tester.
采用差示扫描量热仪（DSC）研究稀土6061合金及其基体合金材料的时效析出序列，采用金相显微镜观察了稀土6061合金及其基体合金材料的显微组织。
The precipitation procedure of 6061-La and 6061 alloy was studied by differential scanning calorimetry (DSC). The microstructure of 6061-La and 6061 alloy was observed by metallurgical microscope.
利用差示扫描量热仪（DSC）研究了炭纤维（CF）表面异氰酸酯化改性后阴离子接枝尼龙6（PA6）对CF/PA6复合材料中PA6的多重熔融行为的影响。
The effect of surface isocyanation of carbon fiber on the melting behavior of PA6 in CF/PA6 composites was studied by Differential Scanning Calorimetry(DSC).
本文报道了利用差示扫描量热仪（DSC）跟踪4，4’-二氨基二苯甲烷四缩水甘油基环氧树脂（TGDDM）与4，4’-二氨基二苯甲烷（DDM）固化体系的固化反应研究的结果。
Studies on the cure reaction of tetraglycidyl 4 , 4'-diaminodiphenyl methane (TGDDM) epoxy with 4, 4'-diaminodiphenyl methane (DDM) has been made by using differential scanning calorimetry (DSC).
采用差示扫描量热分析(dsc)仪和快速黏度分析(rva)仪对抗性淀粉样品的应用特性进行了分析。
Differential scanning calorimetry (DSC) and rapid visco analyser (RVA) were used to determine the application characteristics of resistant starch (RS) prepared from various starch sources.
应用推荐