采用显微CT扫描和微分干涉差显微镜进行纤维环破裂的研究。
Investigation of the resulting annular disruption was carried out using microcomputed tomography and differential interference contrast microscopy.
在微分干涉差显微镜和扫描电镜下，则呈现为球形细胞和扁平细胞。
The two types of cells are spherical and flat in shape under differential interference contrast microscope.
用差热扫描量热仪和偏光显微镜检测其液晶性。
Their properties are characterized by DSC and polarizing microscopy (POM).
并用示差扫描量热分析和偏光显微镜进行表征，确定其相变温度和液晶织构。
Its liquid crystalline phases were studied using differential scanning calorimeter (DSC) and a polarizing microscope with a hot stage.
并且借助于偏光显微镜、广角X-射线衍射仪（WAXD）和差式扫描量热仪（DSC）研究了不同成膜条件下膜的结晶情况。
And polarizing microscope, wide-angle X-ray diffraction (WAXD) and differential scanning calorimeter (DSC) were used to study the crystalline of PLA membranes prepared at different conditions.
利用红外、X射线衍射、差热和电子显微镜等手段研究了复合锂钙基脂的结构。
The structure of Li Ca complex grease was studied through IR spectroscopy, X ray diffraction, DTA and electron microscope.
本文用偏光显微镜和示差扫描量热计（DSC）方法研究了碛纤维对聚丙烯结晶行为的影响。
Polarizing microscopy and differential scanning calorimetry (DSC) were used to study the effect of carbon fiber on the crystallization of polypropylene (PP).
采用差示扫描量热仪（DSC）研究稀土6061合金及其基体合金材料的时效析出序列，采用金相显微镜观察了稀土6061合金及其基体合金材料的显微组织。
The precipitation procedure of 6061-La and 6061 alloy was studied by differential scanning calorimetry (DSC). The microstructure of 6061-La and 6061 alloy was observed by metallurgical microscope.
对显微镜物镜浸油与媒质水溶液折射率不同所产生的球差对光阱力的影响进行了定量计算与数值分析。
Effects of spherical aberration caused by the refractive mismatch between objective oil and medium water on optical trapping force is calculated quantitatively and also analyzed.
采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
实验研究了松香型成核剂在聚丙烯（PP）中成核增透效果的影响因素，并通过偏光显微镜（PLM）和差热扫描量热分析（DSC）探讨了其中原因。
Some factors affecting the transparency of the abietyl nucleating agent for PP were studied, and some reasons were investigated by PLM and DSC.
采用偏光显微镜(PLM)、差示扫描量热仪(dsc)、毛细管流变仪和拉伸试验机对透明聚丙烯(PP)的结晶形态、热学、流变性、力学性能进行了研究。
In this paper, the crystalline morphology, thermology, rheology and mechanical properties of clarified PP are investigated by PLM, DSC, Rheometer and stretch tester.
运用差示扫描量热分析、动态力学分析、交流复阻抗谱、扫描电镜和原子力显微镜对体系性能和形态进行了研究。
DSC, DMA, complex impedance analysis, SEM, and AFM were used to investigate the properties and morphology of the system.
表明时域有限差分方法在光子扫描隧道显微镜理论研究中具有很大潜力。
The results show that the finite difference time domain method is an efficient tool for photon scanning tunneling microscope.
本文阐述膨胀型防火涂料的主要成分及其制法，并用差示热分析法、热重量分析法、透射电子显微镜等方法研究涂层受热时变化情况。
It described the main components of the expansive fire-retardant paint and its preparation. DSC, TGA and TEM were used to study the film performance during heating.
通过偏光显微镜（PLM）和差示扫描量热仪（DSC）对MB的成核效果进行了表征。
The influence on its crystallization characteristics was also investigated by using PLM and DSC.
配有单色 器、球差校正 器、HR GIF的新一代场发射枪透射电子显微镜可提供亚埃的空间分辨率和亚电子伏特的能量分辨率，为研究物质的原子 电子结构提供了可靠的保证。
A sub-angstrom spatial resolution and sub-eV energy resolution can be reached in new type of FEG TEM in combination with monochromator, C_S corrector and HR-GIF.
配有单色 器、球差校正 器、HR GIF的新一代场发射枪透射电子显微镜可提供亚埃的空间分辨率和亚电子伏特的能量分辨率，为研究物质的原子 电子结构提供了可靠的保证。
A sub-angstrom spatial resolution and sub-eV energy resolution can be reached in new type of FEG TEM in combination with monochromator, C_S corrector and HR-GIF.
应用推荐