因此，设置连通孔的差动式调压室是合理可行的。
Therefore, the differential surge tank with interconnecting holes arranged is rational and feasible.
羊湖电站调压井为差动式结构，由竖井和上室组成。
In Yangzhuoyong Lake Hydropower Station, the Surge shaft, a differential structure, is composed of vertical shaft and upper chamber.
导出了差动式调压室大井面积和有效阻抗孔面积的计算方法。
The calculating method of section of the well and the effective impedance hole in the surge tank has been gived.
在对气动测量进行理论分析的基础上，研制出一种差动式新型气动量仪。
On the basis of theoretical analysis on pneumatic measuring instruments, a new type of pneumatic instrument is introduced.
该差动式滚动轴承在高转速、高载荷的环境中使用时寿命长且可靠性高。
The differential type rolling bearing has long service life and high reliability when used under the conditions of high rotating speed and high load.
形成的一个电容性安排的一部分的多个梳齿可以制成该差动式传声器膜片的一部分。
Comb fingers forming a portion of a capacitive arrangement may be fabricated as part of the differential microphone diaphragm.
阐述了手持式内置微型差动式电荷放大器和频率补偿电路一体化的发动机振动传感器。
A composite motor vibration transducer with differential charge amplifier and adaptive frequency compensating circuit is introduced.
作者研制了差动式电感传感器，对实际铸件进行了测试，测试结果与理论分析计算一致。
The authors have studied and developed a differential inductive sensor, by which some actual castings ha...
根据差动式调压室的基本微分方程，首次推导出了差动式调压室涌浪幅值的理论计算公式；
The theoretic calculating method of the maximum and the minimum water level in the differential surge tank has been derived firstly .
在压力的作用下一个电容器的容量增大而另一个则相应减小，测量结果由差动式电路输出。
Under the pressure of increasing the capacity of a capacitor while the other is reduced, measured by the differential circuit output.
空间对接机构差动式缓冲系统参数设计研究是开展对接机构的工程研制必须解决的首要问题。
The parameter design of buffer damping system is the primary problem of researching space docking mechanism in engineering.
该文从差动式调压室的基本方程出发，推求了差动式调压室理想设计时水位波动的计算公式。
The paper is based on the basic formula of surge tank, in which the formula of the surge in the ideal design surge tank has been derived.
研究了差动式电感传感器的输出特性，在此基础上提出了采用标准组合量块的传感器标定方法。
The output characteristic of differential inductance sensor is analyzed, and the calibration of sensor using standard combinatorial gauge is put forward.
文中所设计的履带式移动机器人采用差动式驱动结构，实验证明，比传统的带转向轮的移动机器人更容易实现其转向控制。
This caterpillar track mobile robot use differential drive structure, which makes it easier than tradition method to carry out steering control.
结合高压输电线的特点，在论述了电涡流检测方法的基本原理之后，进一步论述了差动式检测线圈的电涡流检测原理与方法。
Taking into account the characteristic of the high-voltage transmission line, this paper discusses the basic principle of the eddy current testing method.
对差动式无级变速减速装置的典范方案，进行了运动学、动力学和机构学的分析研究，提供了差动式无级变速减速装置技术设计的准则。
This article presents kinematic, dynamic and mechanistic analyses and studies of a typical plan of the differential type stepless variable moderator, and provides the technic basis of its design.
设计了由三轴差速机构、管径适应机构组成的管道机器人三轴差动式驱动单元，对驱动单元在直管、弯管的差速特性与力学特性进行了理论分析。
This paper discusses the mathematical modeling of in-pipe robot, and the analysis of the robot for fitting in pipelines such as siphon and branch pipeline.
本文在比较各种板厚测量方法的基础上，根据成象原理着重论述了差动式激光三角法测厚技术，讨论了聚先进键和咸象系统结构参数的设计，分析了板材抖动产生的动态测量误差，并提出自动补偿的途径。
The design prameters of focus lens and image system are given, and the dynamic measurement error in vibration of the plate is also analyzed, and the way of its autocompensation is presented.
除此之外还有利用差动变压器和扰曲线应变计的电感变换方式，以及变电阻式压力变送器。
Besides there is also some alternatives such as an inductance conversion using differential transformer and space curve deformeter and variable resistance pressure transmitter.
讨论了位移传感器对电磁轴承系统控制精度的影响，在此基础上提出一种差动电感式位移传感器的设计方案。
Discuss the controlling accuracy of displacement sensor used in AMB system. On the basis of this, a design program of differential conduct displacement sensor is given.
大量的应用分析说明，采用自动测量原理的差动电阻式仪器测量正常，为大坝的安全分析提供了可靠的依据。
Based on many of examples of actual application, this type instruments have proved having a normal measurement and providing a reliable reference for dam safety analysis.
对封闭式差动轮系进行了受力分析，揭示了封闭系统所起的作用以及轮系中的功率分流和力分流的现象。
Theaction of the Closed system, the phenomena of the split flow of power and the force in the closed type of differential gear train have been demonstrated.
本文应用转化机构的基本概念分析了封闭式差动轮系，多自由度轮系和多重轮系的传动比、力矩和效率。
Based on the basic concept of transformed mechanism, transmission ratio, moment and efficiency of closed differential train, multiple freedom train and multiple train are analysed in this thesis.
对差动变压器互感式电感位移传感器动态测试系统进行建模研究，对模型的参数予以量化。
Modeling research on the dynamic measurement experiment system based on inductance displacement sensor, and obtain the parameters of the modeled model.
作为一种位移传感器，在许多领域取代了无接触式差动变压器和精密线绕电位器。
As a traveling sensor, It has taken the place, in many fields, of non contact differential transformer and precise wire wound potentiometers.
在分析双绕组变压器的差动保护算法的基础上，提出了适用于三相三绕组变压器的比率制动式算法，并对判据进行了简化。
Based on the analysis of the differential protection of the double winding transformer, the paper presents a simplified ratio restraint algorithms for the three phase, three winding transformer.
介绍了一种数字式线路差动保护的实现方法。
Presents a realization method of digital line differential protection.
介绍了差动变压器式压力传感器的工作原理、磁路设计及关键工艺。
The principle, the design of magnetic circuit and the key technics of the differential transformer type pressure sensor were described.
在区内故障时可靠动作，快速切除故障。目前，该方法已成功应用于基于32位DSP的数字式光纤电流差动保护装置。
It ensures both sensitivity for internal faults and reliability for external faults, which is successfully applied in digital fiber current differential protection with 32 - bit DSP.
在区内故障时可靠动作，快速切除故障。目前，该方法已成功应用于基于32位DSP的数字式光纤电流差动保护装置。
It ensures both sensitivity for internal faults and reliability for external faults, which is successfully applied in digital fiber current differential protection with 32 - bit DSP.
应用推荐