文中对该工艺的设计基础、结构参数及工艺参数、工艺特点及效能进行了较详尽的分析。
In the paper author have analysed the basic design, the structure and best parameter, the characteristics and efficiency of this technology with more detail.
在分析了M型T形节延时线的延时特性基础上，对其设计方法、工艺要求等做了较详细介绍。
Having analysed the delay characteristics of m type t shape node lines, its design method and technical requirements are detailedly introduced.
在进行广泛深入的工艺试验基础上分别对上述零部件进行设计更改。
On the base of technological test, the designs for above parts have been improved.
为合金设计与加工工艺的优化提供了理论与实验基础。
The base of theory and experiment was provided for the alloy's design and process technology.
在介绍了马铃薯淀粉生产线工艺流程的基础上，提出并设计整套控制系统的方案。
Using distributed control system, the design of control system of the potato starch production-line based on the process flow is proposed.
石油及其馏分的物性数据是石油炼制工艺设计的基础数据，以往常常采用手工计算或查阅有关图表获得。
The property data of crude oil and its fraction is the basic data in design of petroleum refining technology. In the past these data were obtained by hand calculation or consulting tables and charts.
阐述了中型电机成型线圈的热压成型工艺，在实验的基础上，研究并设计了中型电机成型线圈热压成型装备。
The hot- pressing technology is introduced and the hot- pressing equipment is designed for formed coils of middle sized motors based on experiment.
本文在完善气举公式法设计的基础上，提出了用PC-1500计算机编制的气举排水采气工艺的设计程序。
On the basis of perfecting gas-lift formula method design, this paper presents the design program worked out with PC-1500 computer for gas-lift water withdrawal technology in gas production.
其中包括气悬浮测振支承理论的基础、气体静压轴承的设计、关键零件的技术要求和加工工艺等。
After the theoretical basis of air-bearing system, the design of air static pressure bearing and the technology of key accessory are stated.
烧结试验是指导烧结厂设计和生产工艺条件优化的基础，也是烧结研究的重要组成部分。
The sintering experiment is not only the base for guiding design and optimization of producing technique conditions but also is the important part of sintering investigation.
并在室内试验和工程现场数据的基础上初步提出泡沫沥青再生工艺的级配设计原则。
Based on the lab and construction site data, finally indicates the gradation design principles for foamed asphalt reclaimed technics.
建筑陶瓷厂在工艺设计和土建结构设计中常常存在一些矛盾，尤其是设备基础和厂房柱基础之间矛盾更加突出。
Some contradictions are always present at technology and building construction designs in the building ceramics factory. The contradictions between equipment and column foundations are more obviously.
该模型将同时得到经济流速、设备及管道最佳直径和经济保温厚度，可作为管道工艺设计的基础；
Meanwhile, the economic flow rate, optimum diameter and economic insulating layer thickness of the equipment and pipeline have been obtained with the model, which provide a basis for pipeline design.
在了解聚氨酯橡胶冲裁的过程和聚氨酯橡胶冲裁的工艺性的基础上，必须掌握聚氨酯橡胶冲裁模具主要零件的设计要领。
On the base of understanding the blanking process of polyurethane rubber and its processing properties, the design gist of the blanking die of polyurethane rubber must be mastered.
本文论述了锡黄铜焊丝连续挤压工艺的可行性、成本和理论基础，介绍了连续挤压工艺的方案以及挤压模具系统的设计。
The feasibility, cost and theoretic basis of the continuous extrusion process for producing tin brass weld wire are studied with its technological process and the design of extrusion dies introduced.
在工艺流程设计的基础上，通过工艺原理分析和试验，阐述了该工艺的可行性和合理性。
On the basis of process design the feasibility and reasonability were expounded by tests and analysis of process principle.
介绍了空调机换热器端板的结构特点，对其几种产品进行了工艺分析，在此基础上设计了端板冲孔模。
Characteristics of end board of heat exchanger of air conditioner have been introduced with technology analysis of several products and introduction of structure features of piercing die.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。
The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
设计了一种采用两级结构来实现工艺要求的双向脉冲电源，在此基础上设计并实现了电源的控制系统。
A bidirectional pulse power supply is designed, which adopts a two stage structure for process requirements. On this basis, its control system is also designed.
在分析、比较波纹管的几种成形工艺和对该波纹管进行结构工艺性分析的基础上，设计了一套试验模具。
Based on the analysis and comparison on the moulding technique and structures technology of bellow, a full set of test dies is designed.
以产品质量、生产成本和生产周期为基础，构造了工艺方案评价分层指标树，建立了工艺设计方案的模糊综合评价模型。
For their estimation a process scheme sorting layer tree is set up. The fuzzy synthetic estimation module is founded based on the product quality, manufacturing cost and production cycle.
大多数传统的音频功率放大器是用双极型工艺设计和制造，其基础在于良好的双极型三极管特性。
Majority of conventional power amplifiers are designed using bipolar technology on the basis of well-known merits of bipolar transistors.
桌面出版专业学习如何设计和展示印刷和电子文件。课程包括数码影像，印刷工艺和基础的图像和网页设计。
Students in this program learn how to design and lay out printed and electronic documents. Classes cover digital imaging, printing processes, and basic graphic and Web design.
在此基础上利用塔板设计软件对新工艺精馏塔板进行设计。
The distillation columns are designed based on the trays by column design software.
在对产品结构特征和要求进行分析的基础上，对产品加工工艺进行了分析探索，并设计了一套专用夹具。
Based on analyzing for product structure character and request, author analyzes and explores for product working technology, and designs a suite special clamp.
在此基础上，对4种规格8件风道零件进行了工艺过程设计和实际加工，产品完全符合图纸要求。
On the basis of this, process planning of 8 ducts of 4 specifications are designed and machined. The products fully meet the requirements of the drawing.
第三部分叙述了基础玻璃制作工艺，包括玻璃配方设计、熔炼工艺和性能测试。
In the third part depicts base glass manufacturing process, which includes glass formula design, glass melting process, and optical parameter measuring.
第三部分叙述了基础玻璃制作工艺，包括玻璃配方设计、熔炼工艺和性能测试。
In the third part depicts base glass manufacturing process, which includes glass formula design, glass melting process, and optical parameter measuring.
应用推荐