介绍了圣麻纤维的特点及其与涤纶纤维混纺竹节纱的生产工艺。
This article introduces the performance of Shengma fiber and the technology of blended slubby yarn with polyester fiber.
单纱经过捻线工序能改善条干,不同的捻线工艺路线对纱线条干c V值产生不同的影响。
Through twister process, single yarn can improve evenness, and different twister technology route have different influence on yarn evenness CV value.
文章详细介绍了采用不同原料、不同纱支和不同组织织制绉布的生产工艺及技术关键。
The article gives a detailed introduction to the process and key technologies for producing crepe with different raw materials, different yarn counts and different textures.
论述了用拉断法直接制条生产高缩率腈纶膨体纱毛条的生产工艺。
High shrinkage PAN bulk top are produced by using the process of "drawing to break".
介绍了原料的选配、纱工艺流程、工序的主要工艺参数选择和成纱质量。
The material selection, spinning technological process, main processing parameters and the quality of yarn are discussed.
第三部分对经编工艺中送经量、用纱比、平方米克重、产量等的计算进行了数学描述。
The third part gives the mathematical descriptions for the calculation of warp run-in, gram mage per square meter and the output of fabric in warp knitting technology.
介绍大豆蛋白纤维筒子纱练漂、染色工艺,详细分析每道工序的效果及筒子纱染色工艺的制定和实施要点。
Package scouring and dyeing process of soybean protein fiber was introduced. The operation main point and effect of each process were also introduced in detail.
对绢纺落绵的纤维性能进行了测试与分析,针对其纤维特点,提出了在棉纺设备上生产绢纺落绵纱的工艺要点。
The fiber properties of silk noil are test and analyzed. According its fiber properties, the key process technologies of silk noil yarn production on cotton equipments are put forward.
根据微旦涤纶纤维的性能特点,通过正交试验分析得出了生产微旦涤纶纱的优化工艺。
Based on the analyses of microfibre terylene's characteristics, the optimum combination of technological parameters in spinning microfibre terylene yarn is obtained by use of orthogonal experiments.
介绍了尼龙66高强力缝纫线筒纱染色工艺。
This paper introduced the tube gauze dyeing process of nylon 66 high force sewing thread.
介绍了铜氨纤维的特性,铜氨纤维与棉纤维混和纺制针织用纱的工艺方案是采用三道并条的工艺。
Property of cuprammonium rayon was introduced. Three passages drawing was done, and this processing plan was adopted when spinning cuprammonium rayon cotton blended knitting yarn.
实践证明,采取合理的工艺措施后,生条品质和成纱质量都有所提高。
The practice shows that carding sliver and yarn quality are enhanced after adopting reasonable technology measures.
叙述阻燃丙纶空气变形纱机舱座椅面料的织造工艺,重点为gtm- 88型专用挠性剑杆织机的上机工艺参数的确定。
The weaving technology of flame retardant polypropylene ATY cabin seat fabric is related. The focal point is the determination of technological parameter of GTM-88 rapier weaving.
生产实践中选用适当的纺纱工艺是保证针织纱品质的重要方面。
According to production practice, a proper spinning technology is the guarantee of quality for knitting yarn.
文章针对毛麻混纺针织纱混纺比、纺纱工艺流程、各道工艺参数的合理选择及质量控制等方面加以探讨。
The selection and quality control of blending, spinning process and processing parameters in wool-flax blending knitting yarn have been discussed in this paper.
传统的纯棉绞纱前处理工艺存在工艺流程长、煮损率大、物料消耗大等缺点。
The drawbacks of conventional pretreatment process for cotton are long process line, large scouring loss and large mass consumption.
所得结论对赛络纺纱工艺制定、成纱结构研究及产品开发提供有益的参考。
The conclusions are helpful to making the spinning process, studying the structure of sirospun yarn and developing its products.
探讨了粘合剂LPD在涂料染纱工艺中的应用。通过一系列应用实验,筛选出涂料染纱的最佳工艺和最佳配方。
It has been discussed on application of adhesive LPD in dyeing-yarn technology with coating and obtained for best technology and components with a series of experiments.
通过对纺制特细号纱的各工序工艺参数的优化配置,试纺品种的成纱质量达到预期要求。
Try to make the spun yarn quality achieve the anticipated demand by optimizing configuration on the craft parameters in every working procedure.
由于高档纯棉针织纱在织造工艺、织物结构及织物风格等方面有别于其他机织类用纱,所以对纱线的质量要求有其特殊性。
Advanced pure cotton knitting yarn is different from other weaving yarns in weaving process, fabric structure, and fabric styles. The requirements of yarn quality have its own specialty.
通过胶辊、胶圈不同纺纱工艺参数的配置试验,优选出较好的工艺方案,达到了提高成纱质量的目的,取得了好的效果。
Through allocation trial of variety specification of cots and aprons, ideal process plan is optimized for better spinning quality, consequently a good result.
实践表明,F1510型细纱机机构设计合理,工艺调整方便,性能可靠,成纱质量稳定。
The practice shows that F1510 spinning frame has reasonable mechanism, convenient processing adjust, reliable property and stable yarn quality.
生产中应从工艺、设备、操作运转方面改善转杯纱内外在质量,降低单强CV值。
It has to improve the rotor spinning yarn quality from processes, equipment and operation to reduce the single yarn strength CV.
介绍了纯棉高支高密液氨潮交联免烫府绸面料的开发技术,如纱线选择、规格设计、筒子纱染色、织造和丝光工艺等;
The designing and idea of developing top grade high counts and high density poplin fabrics are introduced, such as yarn selection, texture design, package dyeing, weaving and mercerizing process.
分析了针织纱工艺与机织纱工艺的特征、牵伸工艺的可靠性及综合配置问题。
Characteristics, reliability of drafting processing and synthetic configuration of knitting yarn processing and woven yarn processing are analysed.
通过清纱试验,探索出亚麻针织纱清纱的最佳工艺参数及适合条件。
Selecting the optimized clearing process parameter and the suitable condition for the flax knitted yarn by the experiments.
通过优化工艺参数,保证了纺纱的顺利进行和成纱质量。
Processing parameters are optimized to guarantee smooth spinning and yarn quality.
分析了维劳夫特纤维的性能特征,概述了维劳夫特纤维与涤纶混纺各工序的工艺参数及其成纱质量。
This paper has analyzed the performance and characteristics of Viloft fiber and summarized technical parameters of every proccess and described the yarn quality.
生产实践证明:用转杯纺工艺生产的䌷丝纱,其产品质量、原料消耗、加工成本等均优于环锭纺工艺。
Production practice proves that, in noil silk yarn production, rotor spinning process is superior to ring spinning process in terms of product quality, raw material consumption and processing costs.
生产实践证明:用转杯纺工艺生产的䌷丝纱,其产品质量、原料消耗、加工成本等均优于环锭纺工艺。
Production practice proves that, in noil silk yarn production, rotor spinning process is superior to ring spinning process in terms of product quality, raw material consumption and processing costs.
应用推荐