MEMS加工工艺的核心是工艺模型。
The kernel problem in virtual MEMS fabrication process is process model.
提出一种基于FMS生产调度与控制的零件动态工艺模型。
In this paper a dynamic process model of part is built based on the scheduling and controlling for FMS.
摘要提出一种基于FMS生产调度与控制的零件动态工艺模型。
Abstract: in this paper a dynamic process model of part is built based on the scheduling and controlling for FMS.
面向过程的虚拟装配工艺规划系统对装配工艺模型提出了新的要求。
The process oriented virtual assembly process planning system brings forward new requirements for the assembly process model.
提出了采用离散化与函数拟合相结合的方法简化型钢轧制的工艺模型。
By the method of dispersing numerically and coinciding with a function, a pro-gram of simplified section rolling model is proposed.
提出了采用离散化与函数拟合相结合的方法简化型钢轧制的工艺模型。
By the method of dispersing numerically and coinciding with a function, a program of simplifying the shape rolling model is proposed. From the results of off-line sim...
提出了采用离散化与函数拟合相结合的方法简化型钢轧制的工艺模型。
By the method of dispersing numerically and coinciding with a function, a program of simplifying the shape rolling model is proposed. From the results of off-line simulation, it...
提出了采用离散化与函数拟合相结合的方法简化型钢轧制的工艺模型。
By the method of dispersing numerically and coinciding with a function, a program of simplifying the shape rolling model is proposed. From the results of off-line simulation, it is proved that the...
本课题中以COM组件的形式封装和调用了用VB写的工艺模型层组件。
In this project, we use COM technology to seal and call the Process Model Layer, which is written in VB.
通过3d工序图模型和参数化空间尺寸链模型的映射，构造工艺模型结构。
Through the map of 3d process picture sheet model and the parameterization of 3d dimension chain model, a process model structure was constructed.
研究了基于特征模块的快速工艺设计的方法，建立了模块和零件的工艺模型。
Rapid process planning method basing on feature module is proposed. The process models of module and part are constructed.
考察了SBR生物除磷工艺模型中活性污泥的微生物组成及其在该除磷系统中的功能。
Microorganisms of the activated sludge in SBR phosphorus removal system and their functions have been studied.
以精密模具制造技术为核心进行滴管CAD工艺设计和快速模具制造（RT）工艺模型的生成；
The CAD process model and the RT process model generation of the dropper are carried out taking manufacturing of the precision mould as the core.
给出了基于该工艺模型的定量化工艺设计系统，为解决3d环境下的定量化工艺设计提出了一种新思路。
Based on it, quantified process planning system was established. The new way was presented to solve the problem of quantified process design under the 3d environment.
最后将设备模型与工艺模型集成，形成混料、成型、喷涂、包装四部分模型完成整条生产线模型的创建。
The equipment model and processing model were integrated to form four parts of models including mixing, shaping, spraying and packaging, and finally the model of the whole production line was built.
二是将旁路污泥减量工艺模型的厌氧池中的污水作为原水，按照烧杯试验中所得的最佳参数设置并进行试验。
On the other hand, took the sewage in by-pass sludge reduction technology model anaerobic tank as raw water, then set up and experimented as per optimum parameter of the beaker test.
研究了工艺信息标识及全三维标注方法、动态工艺模型构建、全三维工艺模型可视化发布以及工艺流程在线触发和控制关键技术。
The key technology that full 3Dannotation of process information, dynamic process model constitution, 3Dvisual release of process model and on-line control of process flow are researched.
本文在MIOD工艺模型的基础上，进行了MIOD主沟水力性能及流态研究与工艺运行方式的试验研究，进而由此进行了新型一体化氧化沟工艺效能分析。
Based on the model experiment, flow performances of the main ditch and operation styles of MIOD are experimented and furthermore, energy efficiency is analyzed in the article.
胶乳(一般在手工艺店的模型区可以找到)。
Rubber latex (found at craft stores, usually in the model section).
当牛顿年轻的时候，他做了一个带时钟的风车磨坊模型——在他的时代是高科技的手工艺品。
Newton, when young, made model windmills and clocks - the hi-tech artefacts of his time.
工艺配管的设计是直接按照工程项目的一个模型完成的。
The design of the process piping is performed directly on a model of the project.
根据对工艺和实验数据的分析及预测目标等条件，确定了模型的结构。
The model structure was designed based on the analysis of technology and experiment data as well as forecast target.
根据所建立的模型，模拟了纺丝工艺条件对纤维异形度的影响。
The effect of spinning technology conditions on fiber shaped degree was simulated by using the established model.
智慧模型：准确地反映真实产品、制造工艺和产品使用情况。
Intelligent Models: Accurately reflect real products, their manufacturing processes and usage conditions.
敏捷2008大会上面，BobMartin在他的发言中强烈推荐了这个模型，并继而创立了软件工艺者宣言。
Bob Martin made a push for this model in his keynote at the Agile 2008 conference, and went on to create the Manifesto for Software Craftsmanship.
详细分析对连续蒸煮过程的工艺和模型，提出一个对蒸煮过程进行的多目标决策。
Starting from a detailed analysis of the technology and the model of continuous cooking process, a multiple-target decision on cooking process is advanced.
这个工艺理解可以实现替代性生产模型，其投入物料的变动可能不需要严格的限制。
This process understanding enables an alternative manufacturing paradigm where the variability of input materials might not need to be tightly constrained.
义乌市哥特工艺品厂有10年的产品模型设计制作，塑料模具制造经历。
YiwuGothic product model design and manufacture of handicrafts factory for 10 years, Plastic Mould Manufacturing experience.
义乌市哥特工艺品厂有10年的产品模型设计制作，塑料模具制造经历。
YiwuGothic product model design and manufacture of handicrafts factory for 10 years, Plastic Mould Manufacturing experience.
应用推荐