基层的焊接工艺参数按同种基层材料焊接的工艺参数确定。
The welding parameters of base plate and clad plate refer to those of the same base material and clad material respectively.
在此基础上，分析了废弃木屑生物质能利用的实际价值，为其后期利用的干燥和燃烧工艺参数确定提供了依据。
The results shows that it is potential to use as fuel, and gives technical foundation to determine the parameters for drying and burning process.
以往文献对工艺参数的确定和优化研究都是集中在以工人的经验和传统数学模型的建立。
The research of technology parameters definition, optimization and prediction which focused on worker experience and traditional arithmetic model building in past literature.
在冷热两种状念下进行了轴系合理校中计算，并确定中间轴临时支承的位置、法兰间偏移与曲折值各安装工艺参数。
Rational aligning calculation of propulsion shafting in cold and warm conditions, and confirm several fitting technics parameters include of temporary supports, sags and gaps between flanges.
通过气浮实验和反渗透实验研究，确定了最佳工艺参数。
Work out the optimum craft parameters by air floatation experiment and reverse osmosis experiment in the laboratory.
根据实验结果，确定了大麦茶饮料合理的生产工艺技术参数。
According to the results, the rational process parameters for production of barley tea were determined.
在试验中采用多种熔剂的合理配比，控制适当的工艺参数，确定了较好的坯釉配方组成。
In the experiment, the rational matching of many kinds of flux and control the proper craft parameter are adopted to makes up better the formula composition of body and glaze.
但是，国内外现有的CAD／CAM系统仍然需要工艺员来确定加工参数，才能生成刀具位置源文件（CLSF）。
However the existing CAD/CAM systems still need processors to determine the processing parameters, and then generate the cutting location source files (CLSF).
通过诸工艺参数的优选，扩散层性能的多方面考核和生产实践，确定了LT新工艺。
A new LT process was established after the preferred Selection of technology parameters, various examinations of properties of the diffusion layer and production practices.
以苦荞为原料，辅加10%的复合果汁，采用液体深层发酵生产工艺，研究了发酵过程中各主要成分的变化，并确定了加工工艺参数。
The changes of principal components during bottom fermentation with duck wheat added with 10% compound juice as raw material were analyzed and the processing technology parameters were determined.
确定所有可能可影响工艺性能的已知物质属性和工艺参数。
Identify all possible known material attributes and process parameters that could impact the performance of the process.
本文主要介绍了南瓜保健蛋糕的加工工艺过程，通过正交实验确定了该产品的工艺参数和最佳配方。
The paper introduced the technological process of making pumpkin health cake, and obtained the technological parameters and the optimal formula through orthogonal experiment.
采用复合法制备型壳，在制备过程中，改变不同的环境湿度和温度而得到型壳的不同干燥时间曲线，确定工艺参数优化值。
Using mold prepared by compound method, on the basis of different drying time curve attained by changing environmental humidity and temperature, the optimized processing parameters were determined.
实验确定了最佳合成工艺参数，并同时提出了合成液的分离方法及条件。
The best parameters of process were determined by experiment, the separating method and condition were obtained.
介绍挤拉成型玻璃钢高低杠杠面所用原材料、基体配方及产品性能，确定了该产品的工艺参数。
The raw materials, matrix formulations and product properties were introduced for the pultrusiened FRP bars of asymmetric bars, and the technical parameters of the product determined.
叙述阻燃丙纶空气变形纱机舱座椅面料的织造工艺，重点为gtm- 88型专用挠性剑杆织机的上机工艺参数的确定。
The weaving technology of flame retardant polypropylene ATY cabin seat fabric is related. The focal point is the determination of technological parameter of GTM-88 rapier weaving.
绍了钎头温挤成型工艺的研制过程、主要工艺参数的确定及模具设计过程。
This paper introduced the manufacturing process of bore bit warm extrusion technology, main technological parameter and mold design process.
根据试验数据。确定了合适的烧结工艺参数。
Based on the testing data, the suitable sintering process parameters were defined.
本文介绍了炮采工作面爆破的一些新工艺和参数确定。
In the paper, some newly technology and parameters' choosing methods in blasting face were introduced.
论述了中吨位汽车前轴辊锻成形工艺参数的确定方法和模具设计要点。
The selection method of roll forging process parameters of middle tonnage automobile front axle and die design outline were stressed.
叙述了鼓风返烟烧结机的投产实践，介绍了工艺参数的确定，生产过程的控制，出现的问题及解决措施。
The paper describes the practice of put into operation for up-draught gas back sintering machines; introduces technical parameters determined and production control and solve measures for problems.
试验对花生奶茶的制作工艺参数、配方进行了确定。
At last, the optimum processing parameters and prescription of peanut tea milk was fixed.
论述了地下建筑用环氧树脂改性湿固化聚氨酯漆的生产工艺和技术参数的确定。
The production technology and technical parameters of the epoxy modified moisture cured polyurethane paint for underground structures were described.
并通过工艺试验确定了合理焊接规范参数。
初步确定了较合理的工艺参数，并取得显著效果。
As reasonable technological parameters have been used, better results have been achieved.
通过切削试验，确定了合理的工艺参数。
Appropriate processing parameters are established through cutting test.
本文着重就生产工艺技术参数的确定进行了设计计算。
This paper discusses majorly on how to determine, design and calculate the technology indices in producing process.
结果优化制粒的工艺条件，确定一步制粒的最佳工艺参数，从而提高颗粒的成品率。
RESULTS Obtained the optimization of one-step pelletization technology and the technical parameters, to improve the ratio of finished product.
介绍了汽车后制动底板冷压成形工艺的应力分析及工艺参数的确定。
This paper presents a stress analysis and selection of processing parameter in cold-pressing forming process for manufacturing the automotive rear brake back plates.
介绍了汽车后制动底板冷压成形工艺的应力分析及工艺参数的确定。
This paper presents a stress analysis and selection of processing parameter in cold-pressing forming process for manufacturing the automotive rear brake back plates.
应用推荐