工程样机项目的技术指导及项目管理。
Application engineering product technique instruction and project management.
研制了工程样机并在上海徐浦大桥上成功进行了现场试验。
Finally, an engineering prototype machine was developed and experiments were done on the Xupu Bridge.
介绍了CEFR反应堆功率调节系统及可编程控制器在工程样机中的应用。
This paper introduces the reactor power regulating system of CEFR and the application of Programmable Logic Controller (PLC) on the engineering test prototype.
本课题主要任务是进行水下金刚石绳锯机切割技术的研究与工程样机的研制。
The main work of this dissertation includes researching the underwater cutting technology of diamond wire saw and developing its engineering prototype.
也许最重要的一点是,谣传苹果公司的iphone5工程样机内置了NFC技术。
Perhaps most importantly, there are rumors that some of Apple's prototypes for the iPhone 5 incorporate NFC technology.
本工作在反应堆控制棒可移动线圈电磁驱动机构工程样机实验台架上,进行了电磁铁刚度实验。
This work concerns in the rigidity experiment of coil-moveable electromagnetic drive mechanism for reactor control rod.
本文主要研究了声光Q开关驱动器的关键模块——高效率E类功率放大器,设计实现了工程样机。
This thesis does research on the key module of Q-switch driver—high efficiency Class-E power amplifier, including the design and implement of the prototype.
近年来,虚拟样机技术作为一种新兴的设计手段,被越来越多地应用于工程设计和机械系统性能研究。
In recent years, as a new design tool, virtual prototyping technology is increasingly used in engineering design and mechanical properties of the system.
这些理念将指导整个复杂产品虚拟样机工程信息管理系统的设计、开发和应用实施。
At last, an information management platform of virtual prototype engineering for complex product is designed, implemented and applied.
研制事例表明,虚拟样机技术在铁道车辆工程中有广阔应用前景。
The case study indicates that the technology of virtual prototype has broad prospect of applications in the car engineering.
铁道部科学研究院对铁道车辆工程的虚拟样机技术所涉及的关键问题进行了深入研究,取得显著进展。
Deep studies are carried out by CARS on the key problems in connection with the technology of virtual prototype for car engineering and outstanding achievements are made.
对直动与直动组合的凸轮机械手进行了系统的研究,对其进行了机构设计和精度分析与综合,完成了工程设计,并试制出了样机。
The linear cam manipulator is studied systematically, mechanism design, precision analysis and synthesis , engineering design are carried out, a prototype of the manipulator has been made.
由于缺少合适的建模工具,致动器的设计一直基于经典的工程方法:需要样机和测试,严重影响了其应用。
Due to the lack of suitable modeling tools, the actuator has been designed based on the classical engineering approach: the need for prototyping and testing, what serious impact on its application.
作者认为,复杂产品虚拟样机的开发工作已构成一个系统工程——可称为复杂产品虚拟样机工程。
The virtual prototyping technology for complex product has become a systemic engineering in authors viewpoint, namely virtual prototyping engineering for complex product.
该样机对测量通道和保护通道合并传输,达到了测量级0.2的高精度,使电子式电流互感器的理论优势得以工程体现。
The sample machine transmits test channel and protection one simultaneously and reaches high precision of test level 0.2, which implements ECT's theoretic advantages in engineering.
文中在ADAMS中建立了引信后座销的虚拟样机模型,分别对勤务处理的偶然跌落和弹丸发射期间的高过载情况进行了仿真计算,分析了仿真结果,得出的结论对实际工程设计具有指导作用。
In this paper, the virtual prototype of fuze setback-pin was established in ADAMS software, the dynamic simulation was made in the case of the accident drop and projection of the cannonball.
指导工程师设计制作一款样机并测试验证控制算法与机器人的运动性能。
Guide the engineer to design and make samples to test and validate the control algorithm and motion property.
最后介绍了虚拟样机技术及轿车数字化工程的内容。
Finally, we make an introduction of virtual prototyping and the digital car engineering.
通过虚拟样机技术,工程师可以运用机械系统仿真试验,在设计阶段发现产品设计中的潜在问题,并快速进行修改,减少了对于物理样机的依赖。
By simulation tests, engineer can not only discover the potential problems of design and modify it in time, but also decrease the dependence on physical model.
一些La- 17 C型样机是为研究和反向工程被中国工程师掩饰。
Several La-17C examples were dissembled by Chinese engineers for study and reverse engineering.
设计制造的样机在三峡工程的碾压混凝土施工中试验,取得了很好效果,即将在龙滩工程碾压混凝土施工中推广应用。
The machine designed, which was tested successfully in the RCC construction of Three Gorges Project, will be utilized widely in the RCC construction of Longtan.
基于人机工程学对其具体机械结构进行设计,并制作出试验样机。
Based on the ergonomics, the mechanical structure of the robot for rehabilitation is designed and the prototype is made.
论文的主要研究内容和成果如下:(1)提出了工程机械虚拟样机的体系结构;
The main contents and achievements are listed as follows:(1) Putting forward the systematic structure of construction machinery architecture VP.
本文第二篇密切结合国产工业缝纫机急需提高动态性能指标这一工程迫切要求,以国产GK5-3型双针筒式绷缝机为对象,研究了样机整机系统的振动控制问题。
Vibration Control of an Industrial Sewing Machine In the second part of this dissertation, the vibration control problem of a GK5-3 industrial sewing machine is taken into consideration.
样机实验结果表明,并联控制方案工作可靠、性能优良,工程上易于实现。
The experimental result shows the control scheme of the paralleling of PFC module work reliable with good performance and is easy to realize in practice.
样机实验结果表明,并联控制方案工作可靠、性能优良,工程上易于实现。
The experimental result shows the control scheme of the paralleling of PFC module work reliable with good performance and is easy to realize in practice.
应用推荐