通过对这种电路的工作状态进行分析,提出了正确设计的重要公式和提高效率的方法。
By an analysis of the circuit operating conditions, an important formula for its proper design is derived and ways to improve efficiency are proposed.
分析了螺旋翼片管三辊行星轧机的工作原理,给出了传动系统设计的基本公式。
This paper analyzes the work principle of the three planet rollers mill for helical gill tube, and gives a formula as the basis of transmission system design.
分析了这种新型减速器的工作原理及结构特点,导出了内齿环板的受力公式。
This paper analyzed the working principle and structural characteristics of this new typed reducer, and derived the force acceptance formula of inner-toothed ring plates.
详细分析了整数圈数双头涡旋齿涡旋盘所受的切向力气体力、法向气体力、轴向气体力,提出了在任意曲轴转角下的各种气体力及各个工作腔容积的计算公式。
On the basis of the analysis of each gas force in the twin - scroll compressors, the calculation formulae of working volume and each gas force at all different crankshaft angles were derived.
正是由于非线性电感的存在,造成难以用经典的电工学公式适时分析焊接变压器的工作状况。
It is because of the existence of the nonlinear inductor that the instantaneous working state of the welding transformer is hardly to be analyzed with classical electrotechnical theory.
分析了印制绕组直流电机的断续周期工作制下的计算公式,并通过实例加以验证。
The calculated formula of duty cycle of printed circuit DC motor are analyzed in this paper. The results are verified for example.
应用刚度可靠性设计的理论,对顶杆的工作情况进行分析,提出了一种更加合理的顶杆直径计算公式,并将其用于实际生产。
Working condition of ejector has been analyzed and a more rational calculation formula for ejector diameter has been given on the basis of principle of rigidity reliability design.
分析了防爆装置的结构特点和工作原理,提出了设计要求和有关计算公式。本文还简要介绍了机轮防爆装置的应用情况。
The construction and working principle of the anti-explosion device are analyzed. The design requirements and calculation formulas are proposed. The applications of these devices are presented.
由于这些公式没有包含各种算符,对于实际的信号分析工作者而言具有重要的实用价值,同时对于深入理解框架也十分有益。
The fact that there are no operators in the formula of dual frame is of great practical importance for signal processing, and of great help in understanding the concept "frame".
对清篦破碎机的工作方式、受力情况进行了分析,提出了理论计算公式,列举实例进行了计算,并对计算结果进行了分析和总结。
Analyed the operation mode and load status of the crusher, Put forward the theoretical formulas, made calculations with example, and analyzed the calculation results and summing then up.
对普通单层股钢丝绳和多股钢丝绳工作时内部受力进行分析,推导出多股钢丝绳加载时扭转力矩的计算公式。
The calculation formula of torsion moment of multi-strands wire rope as loaded are deducted by internal force analysis of single-strand wire rope and multi-strands wire rope while working.
分析了冲击载荷作用下粘性流体阻尼器的工作原理,推导了阻尼力公式的表达式,运用落锤冲击试验确定了其中的参数。
The work principle of the viscous fluid damper under shock load is analyzed and the damping expression is derived, the parameters of which are determined using shock tests.
介绍了两种基于无杆活塞的液压夹具,分析了其工作原理,给出了相应的计算公式。
Working principle of two kinds of hydraulic clamping devices, which based on rod-less piston, is introduced, and the mechanics calculation formulas were also given.
通过对其结构设计、工作原理的论述,建立受载变形公式,分析其参数间的关系。
Through discussion of the structure design and operating principle, the equation of deformation under load is established and the relationship between parameters is analyzed.
提出了一种简便、快速测试斜探头工作频率的方法,并进行了理论分析与公式推导。
An easy and rapid way is proposed to measure the working frequency of Angle probe.
还叙述了模-数混合补偿技术的工作原理,分析了引起拟合误差的因素并推导出计算最大误差的公式。
The principle of the analog-digital composite compensation technique is described and the factors causing fitting errors arc analyzed. The formula for calculating the maximum error is derived.
运用假想夹层分析理论,导出了一个较为简便的不锈钢包壳在通常工作环境下蠕变坍塌临界时间的计算公式。
A hypothesis sandwich analytical theory is used, and the formulas for calculation of the creep collapse critical time is given in this paper.
对绞车的工作特性进行分析,采用大林算法,设计了一种恒速度数字控制器,给出了控制模型和数学公式。
Analyzing the characteristic of the hoist, a kind of digital controller of constant speed is designed using Dahlin arithmetic, the model and formulas are presented.
本文通过实践分析,推出最佳、切实可用的成型零件工作尺寸的计算公式。
We should think about all the factors put froword above. This paper proposes optimum and usable calculation formula for it by practical analysis.
文摘:应用刚度可靠性设计的理论,对顶杆的工作情况进行分析,提出了一种更加合理的顶杆直径计算公式,并将其用于实际生产。
Abstract: Working condition of ejector has been analyzed and a more rational calculation formula for ejector diameter has been given on the basis of principle of rigidity reliability design.
本文通过实践分析,推出最佳、切实可用的成型零件工作尺寸的计算公式。
This paper proposes optimum and usable calculation formula for it by practical analysis.
分析了理想条件下开关电源电感电流连续的一般规律,并给出了常用变换器在三种工作状态下的调节特性。其中导出的公式可用于变换器电路设计和计算机辅助设计。
The general theories of the inductor currents on three states and the regulating features of common convertors under idea conditions are described and design formulae are derived from the analyses.
设计了一种双正激电路的软开关和预燃电路,分析了它们的工作原理,推导了一些关键技术参数的计算公式。
A new sort switch topology of two-switch forward converter and xenon-lamp simmer circuit was designed, the principle of their main circuit was analyzed and some key parameters were calculated.
文中详细分析了电路的工作原理,并给出了关键参数的公式推导。
In this paper, the working principle of the circuit and the formula derivation of key parameters are presented.
采用该公式,加标体积可以不受严格控制,其计算结果与真实的回收率一致,适用于日常水质分析工作。
The results show that the recovery rates from the two improved formulas are in accordance with the true recovery rates and the methods are suitable for routine water quality analysis.
本文分析了三相电压型PWM整流电路的工作原理,给出了整流电路的相量图和一系列公式。
In this paper the principle of a 3-phase voltage-typed PWM rectifying circuit is analyzed and both the vector diagram of rectifying circuit and a series of formula are also offered.
结果通过推导把复杂的矩阵运算转化为直接代入公式进行计算,这样对于不具备矩阵知识的广大统计工作者都可应用本模型进行预测分析。
Results We can turn the complicated matris forecast into the simple formula so that most of statistics workers unfamiliar with matris may use this model to do some predictive works.
本文重点讨论了梳齿滤波器的工作原理,给出计算公式,还对设计的线路进行了具体分析。
This paper, discusses mainly the principles of comb filter, shows it's calculating formula and details the circuit of the design as well.
分析了多层压电电源的工作原理,导出了该电源的电压输出公式。
The principle of multilayer piezoelectric power supply was analyzed, and the output voltage formulas were deduced.
分析了多层压电电源的工作原理,导出了该电源的电压输出公式。
The principle of multilayer piezoelectric power supply was analyzed, and the output voltage formulas were deduced.
应用推荐