本文介绍了该芯片的主要功能和工作原理，并结合三星S3C440BX分析该芯片在嵌入式网络系统中使用时的软硬件设计。
The paper introduces its main function and operation principle, then analyses its hardware and software using in Embedded network system base on chip S3C440BX of Samsung.
同时，该设计还论述了嵌入式窗口系统的设计原理，并分析了三项关键的设计技术：消息驱动机制、屏幕管理技术和资源管理技术。
It also presents the design principle for embedded window system and three key technology which are message driving, screen managing and resource managing.
文中对DS1615温度记录器的结构和工作原理进行了分析，并深入讨论了它在嵌入式系统中的应用。
This paper analyses the architecture of DS1615 as well as its operating principle. An in-depth study is presented for the application of DS1615 in embedded system.
文章以光伏并网系统为应用背景，深入研究嵌入式网关的原理、开发和实现技术。
This paper researches deeply on the principle, development and implementation technique of embedded gateway based on grid-connected PV system.
文章首先详细介绍了接入系统的基本原理和关键技术，包括调制技术、差错控制技术、多址接入技术、嵌入式系统技术。
Firstly, the basic principles and the key techniques of access system is introduced, which includes modulation, error control, multi-address access, and embedded-system techniques.
介绍了嵌入式图像处理系统用于零件表面缺陷检测的原理。
The detection theory of parts surface disfigurement based on the embed image processing system is introduced.
介绍了一种面向复杂电子学系统的基于ARM 920t的32位嵌入式计算控制装置的软硬件设计原理与实现方法。
This paper introduces the design schematic and implementation methods of ARM920T-based 32-bits embedded computing control device for complex electronics system.
本文介绍RTL8019AS的内部逻辑结构、工作原理以及它在嵌入式系统中的应用。
This paper introduces RTL8019AS's inner logic structure, work principle and its application in embed system.
文中以模糊逻辑为理论基础，结合大气数据的基本探测原理，设计了用于对嵌入式大气数据系统中传感器测量位置进行优化设计的方法。
Based on fuzzy logic and primary principle of detecting air data, the method is designed for optimizing the measuring positions of air sensors in the flush air data system of aircraft.
方法：说明嵌入式系统工作原理与现状，并提出具体应用实例。
Methods The principle and actuality of embedded system were explained, and a concrete example was presented.
本文分析了无线传感器网络的原理与架构，阐述了嵌入式系统的特点与组成及其在汽车轮胎胎压检测系统(TPMS)中的应用。
In this dissertation, the principle and framework of the Wireless Sensor Network have been introduced, the feature, part of embedded system and its application in TPMS have been analyzed.
单片机原理及嵌入式系统应用。
介绍了一种基于数字信号处理器(dsp)的嵌入式激光雷达图像采集系统的实现原理、硬件结构和软件设计。
An embedded image acquisition system of laser radar based on digital signal processor (DSP) is presented, whose theory of realization, hardware structure and software are also introduced.
根据ARM处理器at91 RM 9200的工作原理和性能特点，提出了一种基于ARM嵌入式技术的车辆运行平稳性系统设计方案。
According to the ARM CPU AT91RM9200 principle of work and performance, this paper presents a set of design scheme on vehicle smoothness criterion measuring system based on ARM.
详述了此嵌入式系统硬件和软件的设计思路，并介绍了嵌入式系统实现远程软件升级的工作原理。
The design theory for embedded system hardware and software is expatiated, and the working principle for embedded system remote software upgraded is introduced.
讨论了嵌入式系统在网络接口设备中的应用，介绍了一种嵌入式智能双以太网系统的设计原理和方法。
The article discusses the application of the embedded system used in the Ethernet interface equipment. It introduces a design theory and method of Embedded intelligent dual-Ethernet system.
在介绍动态口令卡工作原理的基础上，研究了用嵌入式系统实现动态口令卡的实施方案，并进一步介绍了该方案的硬件、软件的实现方法及技术难点。
On the basis of the introduction of the working principle of dynamic password card, the scheme of realizing dynamic password card by embedded systems is studied. And th…
介绍了基于实时嵌入式操作系统的软测量软件包的设计原理、系统框架、关键技术及核心算法。
The design principle, system frame, critical technologies and kernel algorithm of the software package of soft measurement based on real time embedded operating system are introduced.
嵌入式系统应用，信息系统分析与设计，数据结构，编译原理，计算机组成原理。
Embedded System Application, Information System Analysis and Design, Data Structure, Compiler Construction Principles, Composition Principle of Computer.
在详细分析DES的基本原理和应用模式的基础上，结合DES硬件实现的特点，采用正向设计的方法实现了适用于IC卡等有嵌入式安全需要的系统中的DES模块。
On analysis of the principle and application mode of des, a des module which fits for embedded security system such as IC card is realized by topdown design methods.
根据铁路车号自动识别的基本原理，采用ARM9工业级芯片AT91SAM9260设计开发了铁路车号识别系统的嵌入式系统；
The train identification system based on embedded system is designed with ARM9 RSIC CPU AT91SAM9260 under the principle of automatic train identification system.
在硬件方面，本文设计了一个基于32位ARM微处理器LPC 2104的硬件实验平台，并结合嵌入式系统远程监控的需要，给出了硬件电路的整体设计原理和实现方法。
The 32-bit ARM embedded microprocessor, LPC2104, is selected as the core of hardware experiment circuit board, and the designing of hardware circuit is given.
本文在分析一般中文汉字显示原理的基础上，通过分析内存受限系统的特点，提出了在嵌入式系统中实现中文显示存在的问题和解决方案。
By analyzing the theory of display Chinese characters and the characteristic of the limited memory system, we put forward the problem and method of display Chinese characters in embedded system.
本文介绍了基于TMS320 DM 642的嵌入式棉籽识别系统的硬件原理和软件结构。
In this paper, it introduced the hardware theory and software structure of the cottonseed identifying system which is based on TMS320DM642.
文中将讨论嵌入式诊断设备的诊断原理，如何将嵌入式设备挂接到PROFIBUS总线系统和以太网中，如何工作，软件设计及硬件连接等。
Diagnostic theory of embedded device, how to interface to PROFIBUS system and Internet network, how to design the whole software and how to connect the hardware was discussed in the paper.
介绍了单片机实时操作系统（RTOS）在嵌入式系统中的应用，并且结合一个设计范例来说明RTOS的原理和应用于目标系统的方法。
This paper introduces a way of development -RTOS real-time multitask operation system in embedded system . By an example, this paper also explains how to apply the RTOS to a target system.
本文较为详细地从元器件选择、原理图设计、PCB设计等方面介绍了嵌入式汽车网络系统的硬件设计。
The article introduces the hardware design of the system from choose of components, the schematic and the PCB design in details.
介绍了利用隔离器抑制激光电源产生的强共模干扰对系统影响方法和系统嵌入式硬件设计的原理和系统软件功能。
The isolator is used to eliminate high common-mode disturbance produced by the laser power, and the design principle for embedded hardware and the function for software are presented.
本文基于IEC61131 - 3国际标准、软逻辑控制系统的体系结构与工作原理，给出了嵌入式软逻辑控制系统的整体设计方案。
The paper provides a system design schema mainly on the basis of the IEC61131-3 international standard, especially by doing research on the architecture and working principles of the soft PLC.
本文基于IEC61131 - 3国际标准、软逻辑控制系统的体系结构与工作原理，给出了嵌入式软逻辑控制系统的整体设计方案。
The paper provides a system design schema mainly on the basis of the IEC61131-3 international standard, especially by doing research on the architecture and working principles of the soft PLC.
应用推荐