规格尺寸误差应小于1毫米。
这里还详细讨论了砂轮尺寸误差的补偿方法。
In this paper Compensation method of wheel sige deviation is discussed in detail.
最后，导致的部件的尺寸误差的原因进行了分析。
Finally, the reasons resulting in dimension error of the parts are analyzed.
减小尺寸误差、提高表面质量是快速成形的重要目标。
To reduce the size error and to advance surface quality is an important aim for Rapid Prototyping.
快速成型制件的的误差分为尺寸误差、形状误差和表面粗糙度。
The part error with RPT is classified as dimension error, shaped error and roughness of surface.
结果表明，模型计算得到的尺寸误差较小，能够满足尺寸精度的要求。
It turned out that dimension error calculated by grid mapping model is smaller than required precision.
采用粒子群算法对镗孔加工尺寸误差人工神经网络预测模型进行优化。
This paper presented particle swarm optimization (PSO) technique to train multi layer artificial neural network for predicting model of diameter errors of boring processes.
超声振动造成工件的尺寸误差有所增大，使得工件的整体尺寸有所减小。
The compound process increase dimensional error of the workpiece, and reduce overall dimensions.
它不仅能用于测量尺寸误差、形状误差，而且还可以测量相互位置误差。
It can be used for measuring dimensions and shape errors as well as relative position errors.
裁断板下压接触裁刀时自动慢切，使裁断料最上层与最下层没有尺寸误差。
When pressing the cutting board and touching the cutter, it can cut automatically and slowly to make that no size error between the uppermost layer and lowermost layer of the cutting material.
裁断板下压接触裁刀时自动慢切，使裁断料最上层与最下层没有尺寸误差。
With automatic cutting of low speed while the cutting board touches the knife, there will be little difference between upper layer and bottom layer of the materials.
结果表明，节流孔尺寸误差越大、位置偏移误差越大，引起的干扰力矩越大；
The result shows that disturbing torques are increased with both the diameter error of orifices and their position error;
指出现有的计算模型由于忽略了尺寸误差是不完整的，在误差较大时尤其如此。
It is stated that the present physical model is imperfect owing to the neglect of the dimension error, especially when the error is big.
两级加压，上工作板下压至裁刀时转柔性切断，使裁断层次之间没有尺寸误差。
Two-stage pressurizing, flexibility cutting when the working plate fast down press to cutting knife, no size error between the cutting material layers.
文章分析了刀尖安装高度对工件径向尺寸误差的影响，并提出了编程解决办法。
This paper analyzes the influence of tool's installing height on the radical size of the workpiece and the programming solution is also presented.
分析了影响板料冷冲压件尺寸误差的工艺因素，提出了冷冲压件的尺寸经济精度。
Technical factor of influencing size tolerance of cold stamping for sheeting material was analyzed and economic tolerance of cold stamping was mentioned.
该顶尖刚性强、定位精度高，能补偿由于被加工轴的中心孔误差所引起的轴向尺寸误差。
It has strong rigidity and high locating accuracy, simultaneously, it can compensate the axial size error accused by the centre hole size of the shaft.
但是，注塑成型常常出现各种质量问题，例如，短射、飞边、翘曲、熔接痕和尺寸误差等。
But injection molding often results many product's problems such as short shots, overflow edges, warp, weld line, dimension error and so on.
根据客车生产工艺特点，介绍尺寸误差综合控制方法及其在客车驾驶员门焊接生产中的应用。
Based on the characteristics of bus production technology, a comprehensive control method on dimension error is introduced.
极佳的陶瓷物理性能，保证在环境温度和高的工作温度下性能稳定，尺寸误差小、表面质量优秀。
The excellently good ceramic physics performance guaranteed the stable performance under ambient temperature and the high operating temperature, with small size error and outstanding quality.
本文提出用截尾正态分布作为单件、小批量生产的仪器零件、机器零件尺寸误差分布的理论模型。
A curtailed normal distribution as a theoretical model for the error distribution of size of the machine parts and instrument parts in single - part or small-lot production is proposed in this paper.
本文的主要贡献是在建立跟刀架的力学模型的基础上分析了影响细长轴车削尺寸误差的主要因素。
The primary originality is to develop a mechanical model of the follower rest and to investigate the main influencing factors of the diameter error of slender bars.
基于机械加工误差的特点，利用灰色系统理论建立轴承磨削加工过程尺寸误差动态分析的数学模型。
The mathematical model is established for the dynamic distributions of dimension errors in bearing grinding process by means of the Grey theory.
镗孔加工尺寸误差预测补偿是控制镗孔加工尺寸分散度、保证零件互换性的一种经济、有效的方法。
Dimension error prediction and compensation for boring is a cost effective method to control the dimension distribution and maintain part exchangeability.
在对多点成形板类件自由曲面展开算法研究的基础上，从理论上分析了引起板类件自由曲面展开尺寸误差的原因。
Based on the research of unwrapped arithmetic of multi-point forming workpiece surface, the unwrapped dimension tolerance resulted from it has been analyzed in theory.
以实例说明尺寸误差合格性的统计判断和尺寸公差的统计计算方法。为推广统计公差新标准提供一种实用的方法。
A new method for judging the qualification of size tolerance isdescribed. An actual example is included to illustrate the method.
结合机械加工自动线镗孔加工的实际应用，研制了一套面向大批量生产过程的在线镗孔加工尺寸误差预测补偿系统。
Combining the practical application in transfer line for boring, an on-line dimension error prediction and compensation system for boring in series production is developed and applied.
通过对机械加工自动线的分析，阐述了用于大批量生产的机械加工自动线的镗孔加工尺寸误差预测补偿系统的要求。
Firstly, the requirements to dimension error prediction and compensation system for boring in series production are identified and described, based on the analysis of transfer lines.
通过对机械加工自动线的分析，阐述了用于大批量生产的机械加工自动线的镗孔加工尺寸误差预测补偿系统的要求。
Firstly, the requirements to dimension error prediction and compensation system for boring in series production are identified and described, based on the analysis of transfer lines.
应用推荐