本文评述了十余年来单晶X射线衍射技术的进展。
The technical progress on X-ray diffraction for single crystal during last ten years was reviewed.
运用X射线衍射技术和晶相显微技术对试样进行了分析和讨论。
And the samples were analyzed in X-ray diffraction technology, micro-photograph technology and SEM.
用扫描电子显微镜和X射线衍射技术分析了微晶玻璃析晶和显微特征。
The crystallization and microstructure of the glass were investigated using scanning electron microscopy and X-ray diffraction technique.
借助X射线衍射技术，研究了304奥氏体不锈钢热诱发马氏体相变倾向。
With the help of X-ray diffraction technique, thermal-induced martensite transformation in 304 austenitic stainless steel was investigated.
作者利用双晶X射线衍射技术，研究了不同切割速率下硅晶片的切割损伤。
By means of technique of X-ray double crystal diffraction, the different cutting damages of silicon slices have been studied.
本文用在位X-射线衍射技术研究了PAN（聚丙烯腈）纤维的预氧化过程。
The preoxidizing process of polyacrylonitrile (PAN) fiber is investigated with in-situ X-ray diffraction techniques in this paper.
应用电子显微镜、X射线衍射技术，对低温长期使用的铁铬铝电热合金进行分析。
Using electron microscopy and X-ray diffraction techniques, the structure changes of Fe-Cr-Al alloy being used at low temperature for a long time were investigated.
利用X射线衍射技术，研究了由五种不同电镀槽液所获得的镀锌层中品体的取向。
Crystallographic orientation of electrodeposited zinc in five different electrolytes were studied by means of X-ray diffraction technique.
金相学：研究金属与合金组织结构的学科，特别指采用显微镜和X射线衍射技术进行的这类研究。
Metallography: Study of the structure of metals and alloys, particularly using microscopic and X-ray diffraction techniques.
采用红外光谱、差示扫描量热法和粉末X射线衍射技术等研究酒石酸唑吡坦原料药的多晶型问题。
Its structure was characterized by X-ray powder diffraction, elemental analysis, high performance liquid chromatography, and differential scan calorimetry.
方法用多种色谱技术对化合物进行分离纯化，并用光谱技术和单晶X射线衍射技术鉴定化合物的结构。
The crystal structure of the substituted cucurbituril has been detected by using single crystal X-ray diffraction analysis.
利用X -射线衍射技术对溅射沉积在非晶二氧化硅基底上的金属晶体超微粒的生长特性进行实验研究。
Using X-ray diffraction technique, the process of the crystal growth of metal ultrafine particles, which are prepared by sputtering method and deposited on the silica! Substrate, have been researched.
用X射线衍射技术（XRD）研究了PLT薄膜结晶性能，结果表明PLT薄膜为（111）择优取向钙钛矿相织构。
X-ray Diffraction(XRD)was applied to study crystalline properties of PLT films, and XRD patterns of PLT thin films show that there appeared(111)preferred-oriented tetragonal perovskite phase.
利用X射线衍射技术并结合金相组织观察和显微硬度实验，研究了冷轧工业纯钢在电场作用下的再结晶及织构演变规律。
The effect of electric field on the recrystallization and recrystallization texture development in cold-rolled copper was studied by X-ray diffraction (ODF analysis) combined with optical microscopy.
本文利用透射电镜和X -射线衍射技术，对酸雨危害较为严重的重庆市市区大气颗粒物样品进行了较力细致的研究工作。
Transmission electron microscope and X-ray diffraction were used to study airborne particulates collected in Chongqing, Sichuan Province, which are seriously damaged by acid rain.
选用纤维强度有显著差异的不同类型陆地棉品种，采用X -射线衍射技术，研究了开花期对棉花纤维超分子结构动态变化的影响。
By using techniques of X-ray diffraction, effects of anthesis date on the dynamic change of cotton fiber super-molecular structure and strength were studied.
用重结晶方法得到了羟基乙叉二膦酸的单晶，通过单晶x -射线衍射技术测定了晶体的结构，并用红外光谱和核磁共振波谱对其进行了表征。
The single crystal of HEDP was obtained through recrystallization method, which was characterized by single crystal X-ray diffraction technique, infrared and NMR spectroscopy.
研究人员使用不同的技术研究了火山灰颗粒的尺寸和结构，例如原子力显微镜、电子扫描显微镜和X射线衍射。
The researchers analysed the sizes and structures of ash particles using a variety of techniques, such as atomic force microscopy, scanning electron microscopy and X-ray diffraction.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
重点介绍了X射线相干散射成像技术、X射线衍射增强成像技术和X射线相干散射CT成像技术的研究和进展。
The research and development of X-ray coherent scatter imaging, X-ray diffraction enhanced imaging and X-ray coherent scatter CT imaging are mainly summarized.
射线衍射分析技术是一种十分有效的材料分析方法，在众多领域的研究和生产中被广泛应用。
X-ray diffraction analysis technology is effective for material analysis, thus it is widely used in various research and manufacture fields.
用扫描电镜、X射线衍射和能谱技术研究石灰石粉在复合胶凝材料中的水化性能和水化产物。
The hydration properties of limestone powder in a complex binder system were studied by using scanning electron microscopy, X-ray diffraction and energy dispersive spectrometer.
用X射线衍射（XRD）、透射电子显微镜（TEM）等技术研究了PAN基碳纤维在单电流脉冲作用下的结构变化。
The structural change of PAN based carbon fibre by an electric current pulse was studied by means of X-ray diffraction(XRD) and transmission electron microscopy(TEM).
利用高温高压釜设备辅以失重法、采用扫描电子显微镜（SEM）和X射线衍射（XRD）技术，研究了在动静两种状态下CO2分压对P110钢腐蚀产物膜的影响。
Influence of CO2 partial pressure on corrosion scale of P110 steel in stimulated oil field environments was investigated by using scanning electron microscopy(SEM) and x-ray diffraction(XRD).
该薄膜的表面形态和特征采用扫描电子显微技术(SEM)，X射线衍射(XRD)以及原子力显微技术(afm)描述。
The surface morphology and characteristics of the films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and atomic force microscopy (AFM).
采用X射线衍射分析技术对气相流动法制备的纳米炭纤维进行了测试。
Nano - Vapour Grown Carbon Fibers (Nano - VGCFs) prepared by floating method were measured by X - ray diffraction technology.
射线的衍射技术被用来研究同成组原子相关的现象。
X-ray diffraction techniques are used to study phenomena related to the grouping of the atoms themselves. See also materials science, Henry C. Sorby.
利用扫描电镜（SEM）、透射电镜（TEM）和X射线衍射（XRD）等技术分析研究了表面层的微观结构特征。
The substructure morphology and characteristics of the treated region was examined by SEM, TEM and XRD technique.
介绍一种旧型号的X射线衍射仪微机化的升级改造技术以及相应的数据采集与分析系统(XRDS)。
In this paper, a micro-computerized upgrading method for old model X-ray diffractometer, as well as its data collection and analysis system (XRDS) are recommended.
介绍一种旧型号的X射线衍射仪微机化的升级改造技术以及相应的数据采集与分析系统(XRDS)。
In this paper, a micro-computerized upgrading method for old model X-ray diffractometer, as well as its data collection and analysis system (XRDS) are recommended.
应用推荐