概述了X-射线检测图像识别的影响因素；
This article introduces the influencing factor in identify with the x-ray test image.
厚度宽容度是变截面工件射线检测的重要参数。
Thickness tolerance is an important parameter in radiographic testing of thickness changed object.
检测结果与传统的X射线检测法的结果相一致。
The testing result has a good consistance with that of the traditional X-ray diffraction method.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
针对炭素制品X射线检测图像的特点，对缺陷特征提取与选择技术进行了研究。
Defect feature extraction and selection techniques were studied regarding the characteristics of X-ray detection images of carbon product.
针对炭素制品X射线检测图像的特点，对缺陷及其特征提取与选择技术进行了研究。
Regarding the characteristic of X-ray detection images of carbon material, flaw feature extraction and selection techniques are studied.
采用全自动超声波检测、手动超声波检测以及射线检测方法对预制缺陷进行了检测。
Automatic ultrasonic testing, manual ultrasonic testing and radiographic testing techniques were used on the inspection of embedded defects.
用普通便携式X射线机，采用特殊的透照技术，对换热管与管板角焊缝进行射线检测。
Radiographic examination was performed with portable X-ray fault detector appling the special radiographic technique for fillet weld of heat exchange tube-tubeplate.
射线检测技术是一种重要的无损检测技术，目前在钢材的尺寸测量中得到了广泛的应用。
Radiographic testing, an important nondestructive testing means, is widely used in size measurement of steels.
检测钻具缺陷的常用方法有磁粉探伤、渗透检测、射线检测、超声波检测，都存在不足。
The common methods of drilling rods testing include magnetic particle inspection, permeability testing, radial testing and ultrasonic testing, but these methods all have considerable deficiencies.
研究中采用了dxa法检测骨密度，形态定量分析法则被用于确诊放射线检测到的椎骨骨折。
Bone mineral density was assessed by DXA, and quantitative morphometric analysis was used to identify radiological vertebral fractures.
在安检领域，有很多安检技术得到了应用，如全息摄影检查法、核磁共振、X射线检测技术等。
In the domain of security inspection, many kinds of security inspection technology are applied, such as hologram inspection, nuclear magnetic resonance, X-ray detection technology and so on.
通过对不同工艺参数下形成的混合焊点和无铅焊点进行了外观检测、X射线检测和温度循环测试。
Through appearance testing, X-Ray testing and temperature cycling testing, the reliability of mixed solder joints and lead-free solder joints which formed under various process parameters was assesed.
对欧洲标准化委员会制订的有关焊缝射线检测（ RT）的方法和质量评定标准作一概略性评述。
The recent radiographic method and quality evaluation standards prepared by European Standardization Committee are reviewed.
介绍了磁粉检测、渗透检测、涡流检测、射线检测和超声波检测技术在焊接裂纹检测中的应用状况。
The application status of magnetic particle testing, penetrant testing, eddy current testing, radiographic testing and ultrasonic testing in weld crack inspector were introduced.
如今很多电子产品制造商已经意识到，有必要在印刷电路板（PCB）组装线上采用X射线检测系统。
Many electronics manufacturers realized it is necessary to implement the X-ray inspection systems in the PCB assembly line.
结论：系统满足高分辨率、低辐射剂量的使用要求，在微小物体X射线检测方面具有较大的应用潜力。
Conclusion: It can satisfy the system requirements of high-revolution, low - radiographic dosage, and has strong applied potential in X-ray detection of small object.
使用X-RAY射线检测了无铅锡膏的焊接空洞问题，发现焊接空洞的大小和直径都在可以接受范围内。
X-RAY-ray inspection using a lead-free solder paste of voids issue, found that the size and diameter welded hollow in acceptable range.
在复合侧高合金焊接之前，如果要对打底焊道在全长上进行射线检测，则事先经买方同意后可忽略此项要求。
Where backing welds are radiographed for their full length to meet code requirements before clad side high alloy welding is done, this requirement may be omitted with prior approval of the Purchaser.
目前，对于金属厚度检测的方法有很多，例如接触式检测法、射线检测法、超声波检测法、电涡流检测方法等。
Now, there are many methods for measuring the thickness of mental. For example, the contact measurement, the radial measurement, the ultrasonic measurement, eddy current measurement, etc.
射线检测是一种有效的解决办法，但对包覆管道检测需进行复杂的信息处理，如准确快速的射线影象信息读取等。
Radiographic testing is an effective way, but complicated data processing is needed, such as quick and effective data extraction.
USL负责的单元是在线检测印刷线路板，该系统包括光，热，及X射线检测，同时还有超声C扫描检测。
The USL unit forms part of an automated line for inspection of assembled printed circuit boards, which includes automated optical, thermal and X ray testing as well as ultrasonic C scan examination.
在实践的基础上，较全面地介绍了核电站燃料棒焊缝X射线检测质量监督的必要性、监督依据和内容以及监督的实施情况。
The quality supervision of X ray testing of the welds in nuclear power plant fuel rods was introduced including its necessity, basis, contents and implementation.
光检查机，利用自动X射线检测（AXI）技术，为PCB生产提供了很好的在线检测手段，从而有效地保证了PCB的生产质量。
X-ray inspection system, which adopts technology of automated X-ray inspection (AXI), has provided an effective way of on-line defect-detecting which can ensure PCB's quality.
轮毂X射线检测系统由高频X射线机、X射线图像增强器、轮毂检测专用机械装置，计算机图像处理系统、控制装置和铅防护房组成。
Digital X-ray system for Testing wheels is composed of high frequency X-ray unit, X-ray image intensifier, the special mechanical device, computer image processing system, controller and lead cabinet.
背景：关于肢端肥大症骨质疏松骨折的资料有限，在活动性肢端肥大症的绝经后妇女中，可以观察到放射线检测到的椎骨骨折发生率增加。
CONTEXT: Data on osteoporotic fractures in acromegaly are limited. An increased prevalence of radiological vertebral fractures was already observed in postmenopausal women with active acromegaly.
简要介绍了螺旋埋弧焊钢管X射线检测通常采用的方法，分析了螺旋埋弧焊钢管拍片检测中的散射线来源及其对拍片质量的影响，给出了几种切实可行的散射线屏蔽方法。
This article briefly introduced common methods adopted in SSAW pipe X-ray inspection, analyzed scattering line from the origin and its effect on X-ray quality.
射线检测是一种平面投影方式，喷嘴室的射线探伤受这一限制条件的影响，缺陷在不同透照方向上存在的位置与缺陷的尺寸大小导致了对需检测区域缺陷的判定存在一定的偏差；
Radiographic examination is a flat way. The deviation of flaw judgment will be occurred for the flaws position and size will be different according to the direction of radiographic examination.
乘客必须通过金属探测器检测，其随身物品也必须经过X射线设备检测。
Passengers must pass through metal detectors, and their carry-on bags are put through X-ray machines.
接着，他们决定来检测第一种假设，也是最容易的假设，即高能量的太空射线是由饥饿的大黑洞造成的。
They then decided to test the first, and easiest, hypothesis: that energetic cosmic rays are caused by hungry black holes.
应用推荐