各公司不断地尝试改进导线设计，但其中一个问题(即挑战)是，试验测试很难准确模拟人体上发生的事情。
The companies continually try to improve lead designs but one of the problems is, which is a challenge, for bench testing, it is hard to mimic exactly what happens in the human body.
作者依据多年设计实践，论述了在建筑照明设计中应注意的几个具体问题：如怎样合理地选择照度、导线、灯具等。
According to design experience for many years, author discusses several problems being paid attention in illumination design, as selecting lightness, lamps, lead and so on.
导线和电缆的选择是供配电系统设计中的主要内容之一。
The wire and electric cable's choice is one of for in electrical power distribution system design primary coverages.
介绍了常用的不同结构及拉力可以调节的变压器绕组导线张紧装置的结构设计及应用。
The application and structure design of common adjustable tensile force tension devices for winding conductor of transformer with different structure are presented.
在直流输电线路工程设计中，如果按我国现行标准规定的经济电流密度选择导线截面，将导致截面偏小，损耗增大。
In DC transmission line construction design, current national standard of economical current density will under predictcd conductor section, resulting in large loss.
导线截面的论证选型是电力线路设计的重要内容。
The judgement and selection of conductors' section is an important aspect of power transmission line design.
设计的爆压管替代线夹，在电路正常运行的工况下替代爆压续接管承担导线的张力，从而达到保护线路和爆压管的目的。
The line clamp designed in the article can take the place of the explosive pressing duct to take on the tensile force of line in working order.
论证了在这种机构设计下通过不断调整底盘姿态的方法可以让底盘中心线逐渐与引导线重合的实现原理。
An implementation principle using this mechanism design is demonstrated by which the chassis centerline can approach the leading line gradually through continuously adjusting the chassis posture.
电晕效应是特高压输电线路设计中所考虑的关键题目之一，温度、湿度对直流导线电晕影响规律是特高压直流输电线路设计的依据。
Corona effect is one of the key issues of designing UHV transmission lines, in which the influence of temperature and humidity on DC conductor corona should be considered.
重点介绍了用常规线路施工器具组织设计紧凑型线路导线展放的施工工艺和方法。
This paper mainly introduces construction technology and methods using conventional line construction tools organize and design compact line conductor.
按照空气动力弹性相似准则，设计制作了某高压输电线路终端塔全塔气动弹性模型，并按响应相似原则模拟了柔性输电导线；
An aeroelastic model for a UHV power transmission tower and its conductors was designed according to the law of similarity and tested in an atmospheric boundary layer wind tunnel.
所设计的正切刃口曲线将作为曲导线用于构造下切式节能旋耕刀正切刃面。
The designed widthwise edge curve will be used as a directix curve to form scoop surface of the energy-saving down-cut rotary blade by scanning method.
根据条件平差原理，推导出三维导线平差的数学模型，并在VB下实现平差程序设计。
On the base of the principle for conditional adjustment, a mathematic model of3-D traverse adjustment is given, and a program of adjustment is designed in VB language.
设计的爆压管替代线夹，在电路正常运行的工况下替代爆压续接管承担导线的张力，从而达到保护线路和爆压管的目的。
The line clamp designed in the article can take the place of the explosive pressing duct to take on the tensile force of line in working order. The line and the duct can be protected in this way.
设计了由33个红外反射传感器阵列组成的引导线测量系统，用AD转换技术提高对引导线判断的准确性。
Measurement system of pilot line measured by array composed of 33 infrared reflection sensors is designed, and the judgment accuracy for pilot line is raised by A/D conversion technology.
在引入了跨导线性原理后，利用混合跨导线性回路完成了对电压跟随器的设计，进而得到了双极管型电流控制传送器。
After introduction of the tranlinear loop principal, the BJT current controlled conveyor has been designed by using mixed tranlinear loop voltage follower.
所设计的正切刃口曲线将作为曲导线用于构造下切式节能旋耕刀正切刃面。
The designed widthwise edge curve will be used as a directix curve to form scoop surface of …
最终通过设计单片机控制程序来控制单片机系统的输出信号，从而控制机器人的驱动系统，使机器人按照引导线行进。
Finally the program controls the output signals of the MCU system and further controls the actuation system of the robot to guide the robot to move according to the line road.
每一只导向模、挤出模套都可根据用户提供的数据设计制造，100%同轴度检测确保电缆同志轴度，从而使绝缘导线具有精确的电特征。
The 100% coaxial grade inspection can assure users of the coaxial wires and cables, thus featuring the insulted conductor with high precision of electrical property.
根据健康住宅电气设计标准的要求，就健康住宅的配电系统、导线系统、用电安全等方面的问题进行了探讨。
Based on the requirements of design standards of health dwellings, this paper probes into the problems dealing with distribution system, traversing system, electric safety, etc.
针对送电线路设计过程中，边导线风偏后对地距离的检查及处理的不足之处，建立较为精确且实用的计算公式，并实现微机自动处理。
A new, more exact and practical calculating formula is given for the wind-deviation of the transmission line and the procedure can be realized in computer.
本文设计了滑板磨耗图像检测算法，主要包括图像预处理，边缘检测和连接，导线及滑板边缘定位等。
The image processing algorithm of slide abrasion detection is designed in this paper. It includes image preprocessing, edge detecting and linking, contact wire and slide edge location and etc.
涂漆模雏形的几何结构使得导线穿丝，涂漆模采用防漏设计使涂绝缘漆均匀致密，绝缘性能高。
Its geometric structure makes easy to lead the wire. The anti seeping design guarantees the evenness and fineness of the insulating paint and high insulation performance .
在以此材料为基础设计了多层片式电感，初步探讨了金属导线的布置结构及通孔对电感元件的一些参数的影响。
I have designed the multilayer chip inductor take this material as the foundation and discussed a little influences of the metal wire arrangement structure and via in the parameters of inductor.
给出了参数设计原则以及综合E脉冲波形的系统组成框图；并利用细导线散射场数据仿真了理论E脉冲和综合E脉冲目标识别性能；
Then an E-pulse waveform synthesis method using Fourier series expression is proposed, as well as the principles for its parameters choice and system block diagram for E-pulse waveform synthesis.
轨道车辆防护的指导。第2部分：设计标准灭火措施更换导线信号，控制和疏散系统。
UNI CEI 11170-2: Guidelines for railway vehicle protection for tramways and with guided rail. Part 2: Design criteria-measures for fire restringing-Signalling, control and evacuation systems.
轨道车辆防护的指导。第2部分：设计标准灭火措施更换导线信号，控制和疏散系统。
UNI CEI 11170-2: Guidelines for railway vehicle protection for tramways and with guided rail. Part 2: Design criteria-measures for fire restringing-Signalling, control and evacuation systems.
应用推荐