（和电池相比，）这是一种“低能量密度”设备，电能被直接存储在两块静止的导电板上。
This is a low energy-density device, which stores electricity directly by charging two conductive plates with static.
这项新技术用一根轻微加热的探针在石墨烯氧化物上“写上”导电纳米线，而石墨烯正是制造柔性电子设备的理想选择。
The new technique involves "writing" electrically conducting nanowires onto graphene oxide using a tiny heated tip and could be ideal for making flexible electronic devices.
为与充电垫兼容，便携设备需要附带一个特别设计的适配器，适配器背面有三个接线片，用以连通充电垫的导电层。
An adaptor is attached to each gadget (often as a specially designed replacement for its back cover) with three lugs on its back for making contact with the charging mat's conductive surface.
SprayCool已经申请了专利的这项两阶段液态冷却技术使用了无腐蚀、不导电的液体薄雾。把这种薄雾喷在一个薄片上，然后蒸发并冷却电子设备。
SprayCool patented two-phase liquid cooling technology USES a fine mist of non-corrosive, non-conductive liquid, sprayed in a thin layer, which evaporates and cools electronics.
开发电晕放电烟气净化设备用防腐导电涂料，对涂层的导电特性进行了研究。
This paper developed a kind of anticorrosion and conductive coating for flue gas cleaning equipment by corona discharge and studied on the conductive characteristic of coating.
图2a显示了骨愈合的设备，其中金属丝线圈附近的骨折部位的骨诱导电流上。
Figure 2a shows the bone healing device, in which coils of wire placed near the fracture site induce current flows in the bone.
接线搭接面确保清洁，涂抹导电膏，螺栓紧固力矩符合设备接线要求说明。
The junction of bonding jumper should be clean and covered with conductive paste. And the tightening moment for bolt must fit with equipment wiring requirements.
铜排在高、低压电气设备中非常重要，而且既起安装作用又起导电作用，所以铜排的加工工艺地位更显重要。
Copper busbars are important in high-low electric apparatus, they have both effect on installation and electric conduction, therefore, the processing technic of copper busbar is important especially.
各向异性导电薄片及其制造工艺，适配器装置及其制造工艺，和用于电路装置的电气检查设备。
Anisotropic conductive sheet and its manufacturing method, adaptor device and its manufacturing method, and circuit device electric test instrument.
导电衬垫材料在抑制电子设备缝隙电磁泄漏中发挥了重要作用，是目前电子设备中应用最为广泛的一类屏蔽材料。
Conductive gasket material is one of the most widely used shielding materials at present, and plays an important role on the suppression of electromagnetic slot -leakage in electronic equipment.
超导电力设备是超导电力系统的重要组成部分，而仿真分析一直是设备开发的重要手段之一。
The superconductive electrical equipment is an important part of superconductive electric power system and the simulation analysis is one of the main means in equipment development.
随着神经网络的涡电流和温度分布的预测上不断移动的薄导电带横向磁通感应加热(TFIH)的设备。
With neural network the eddy current and temperature distribution prediction on the continuously moving thin conducting strips in transverse flux induction heating (TFIH) equipment is presented.
而且，由于降低了透明导电层上的电压降，照明设备的效率得到提高。
Moreover, as the voltage drop over transparent conductive layer is reduced, the efficiency of the lighting device is increased.
过冷器是高温超导电缆（HTS）低温冷却系统的关键设备之一。
The subcooler is a key device of cryogenic cooling system in High Temperature Superconducting (HTS) cables.
本发明的有益效果是：工艺过程简单，设备成本低，在制备微细导电纤维领域有重要应用。
The method has the advantages that: the craft is simple; the cost of equipments is low; the invention is an important application in the preparation field of miniature conductive fiber.
ABS全自动塑料电镀生产线主要由机架、镀槽、管路、通风、行车、导电系统、阴极移动及辅助设备组成。
ABS automatic plastics electroplating line is composed of frame, tank, pipe, ventilation, conducting system, cathode sweeping and other auxiliary equipments.
电离子可经由导电性管或金属管移送，克服设备内空间狭窄的困扰。
The ions could be transferred through a conductive tube or metal tube, overcoming the problem of narrow spaces in the equipment.
导电材料用组合物，导电材料，导电层，电子器件及电子设备。
Composition for conductive materials, conductive material, conductive layer, electronic device, and electronic equipment.
超导储能磁体的失超是超导电力设备技术实用化有待深入研究的一个重要问题。
Quench of superconductor is a key problem for the practical application of superconducting electrical power equipment.
提出了一种采用近距离激光无线通信系统来代替导电环进行光测设备机上、机下部分的信号传输，并以单路通信实验对该方案进行了验证。
A kind of system that replaces conductive ring with the wireless communication by laser in short distance is carried out to transmit signals. The scheme is verified by single channel experiment.
铜带是制造各种电机、器设备的绕组以及其他电工制品的不可缺少的导电材料。
The copper strip is an indispensable conductive material in manufacturing the windings of various electric machine.
为安全起见，应用在高温超导电力设备中的线圈应采取热稳定化路线设计。
For safety, the coil in the HTS power devices should be designed as thermal stabilized.
该导电系统的制作工艺简便，且与其它的薄膜工艺相容，设备具有通用性。
CCNA conductor system can be produced easily and is compatible with other thin film techniques, and the facilities in manufacture are universal.
真空（溅）镀膜有完整的加工设备，可提供UV、不导电NCVM、EMI、硬化…等表面加工处理。
There are integrated equipments on vacuum sputtering plating which can provide surface fabrication such as UV, NCVM, EMI, induration.
并采用优化设计、高导电磁材料制作，致使设备在空载时损耗低、功率输出更强劲、稳定、寿命更长。
And adopting the optimization design, high conductivity, the electromagnetic material production equipment in no-load loss low power output, more powerful, and stability, long service life.
聚氨酯成本低，制作费用低，可随意浇铸，适用于要求不产生火花和不导电材质的设备。
A cost effective alternative requiring less expensive fabrication, infinitely mouldable polyurethane is also suited to applications requiring non-sparking and non-conductive material.
本实用新型涉及一种装订机专用导电橡胶垫座，属于文具设备配件技术领域。
The utility model relates to a conductive rubber cushion specially for bookbinding machines, and belongs to the field of stationery fittings.
LED是静电敏感器件，使用时所有设备、机构都需有适当的接地导电措施。
The LED is an ESD sensitive device. All the equipment and machine must be properly grounded.
电炉铜冷却设备(炉盖，压力环、铜瓦、保护屏，导电立管等)：电炉铜冷却设备应用在大功率矿热炉等电弧炉上。
Copper cooling equipments for electrical melting furnaces are applied to electric arc furnace, like high-power smelting electric furnace.
电炉铜冷却设备(炉盖，压力环、铜瓦、保护屏，导电立管等)：电炉铜冷却设备应用在大功率矿热炉等电弧炉上。
Copper cooling equipments for electrical melting furnaces are applied to electric arc furnace, like high-power smelting electric furnace.
应用推荐