研究人员仍需找到能够使缠绕的超导电路维持更久的方法。
Researchers still need to find a way to make entangled superconducting circuits last longer.
这些铝制超导电路，相隔几毫米，被安装在一个电子芯片上。
These superconducting circuits, made of aluminum, were separated by a few millimeters on an electronic chip.
在合适的材料中，使用X射线来控制掺杂剂原子的状态，用这种方法将使制作超导电路成为可能。
It could be possible to make superconductor-based circuits simply by using a beam of X-rays to control the positions of dopant atoms within a suitable material.
Mariantoni说利用超导电路的方案允许他们将量子比特和存储单元紧靠的放置在单个芯片上，这提供了制造新的冯诺依曼设计的可能。
Mariantoni says that using superconducting circuits allowed the team to place the qubits and memory elements close together on a single chip, which made possible the new von Neumann-inspired design.
这是超导电路和微波光子之间相互作用的想象图。
This is an impression of the interaction between a superconducting electrical circuit and a microwave photon. Credit: Dr. A. Marx, Technische Universitaet muenchen.
一种导电材料，环境惰性液体中的电路是一个理想的材料建造“受雇在板电容器的电场水的”。
An electrically conductive material which is inert in the fluid environment is a desirable material of construction for the electrical field plates of the "water capacitor" employed in the circuit.
三水导电模型系基于岩石的导电路径是由自由流体水、孔隙水和粘土束缚水并联而成的理论。
The three-water( TW) conduction model bases on the theory whoseconductive path is paralleled by free water, micro-porous water and clay bound water.
输入端的保护电路有由带状导电膜组成的栅电极。
The protection circuit on the input end has a gate electrode comprised of a band-like conductive film.
向所述结构施加如老化电压的电压，以使击穿路径的至少一个转化为导电路径(103、280)。
Applying a voltage, such as a burn-in voltage, to the structure converts at least one of the breakdown paths to a conducting path (103, 280).
具体地说，在平行板电容器中，电路是由两个导电表面与它们之间的绝缘体（玻璃）构成。
Specifically, in a parallel-plate capacitor, the circuit is composed of two conductive surfaces with an insulator (glass) between them.
在集成电路封装工艺过程中，对导电胶进行无氧化加热固化的质量直接决定了集成电路的质量和使用寿命。
During the integrated circuit packing process, the quality and service life of integrated circuit are decided directly by the quality of conductive adhesive through non-oxidation thermal curing.
各向异性导电薄片及其制造工艺，适配器装置及其制造工艺，和用于电路装置的电气检查设备。
Anisotropic conductive sheet and its manufacturing method, adaptor device and its manufacturing method, and circuit device electric test instrument.
这将导致电极之间气体的离子化，提供导电路径。
This leads to an ionization of the gasbetween the electrodes, providing a conductive path.
静电产生后可以利用导电路径将其释放，在速度上而言以导体最快，半导体次之，绝缘体最慢。
We can use conduct electricity path to discharge static electricity. And speed of discharge, the first is conductor, then is semiconductor, and insulator.
在岩石导电模型的基础上，参考双侧向仪器刻度电路原理，设计出适用于复电阻率测井仪器的刻度电路，并给出用电路参数模拟不同地层的方法。
Based on the rock conductivity model and with reference to calibration circuit in the dual laterolog tool, designed is calibration circuits in the complex resistivity logging tool.
提出电路的输入电感工作在不连续导电模式（DCM），而输出电感工作在连续导电模式（CCM）。
The input inductor can work at its Discontinuous Conduction Mode (DCM), while the output inductor works at its Continuous Conduction Mode (CCM).
本文首先介绍了光波导电场传感器的工作原理，并建立了光波导电场传感器的等效电路模型和传感系统模型。
First, this paper has introduced the operation principle of the optical waveguide electric field sensor, and built a equivalent circuit model of the electric field sensor and a system model.
介绍了用于煤矿井下智能型真空磁力起动器中的先导电路看门狗的功能及工作原理和一种先导看门狗电路。
Function and working principle of a gate watching dog of a guide circuit and a kind of a guide gate watching dog are presented for an intelligent vacuum circuit breaker in coal mine.
一种电路板，其包括介电层、线路层、至少一导电接合柱与焊罩层。
The circuit board comprises a dielectric layer, a circuit layer and at least one electricity-conducting joint pole and a solder mask.
以乙炔炭黑和高导电炭黑填充天然橡胶，研究其在工频电流电路中的特性。
A study was made on the behaviour of NR compounds filled with acetylene black and super conductive black in the circuit of the current at the industrial frequency.
完成了导电环动态接触电阻测量系统的总体设计，包括硬件电路设计和软件设计。
The design of measuring system of dynamic contact resistance is achieved, including: hardware design and software design.
电弧供电采用了两种并联电路，解决了焊接电流的单一性，提供了稳定的先导电弧，保证了足够的焊接时间。
With two parallel circuits on arc powered supply, it settles the welding current unicity, stabilizes forerunner arc and ensures enough welding time.
研究了开关电源中印刷电路板寄生参数及功率器件瞬态特性产生的传导电磁干扰现象。
Conducting Electromagnetic Interference (EMI) in switching power supplies caused by parasitic parameters and transient characteristic of power electronic elements is studied in this paper.
设计了一种含铝炸药爆轰产物导电式螺线型爆磁压缩发生器，分析其运行过程，得出等效电路模型。
A modified design of helical flux compression generator utilizing detonation products to compress flux was proposed, whose running process and equivalent circuit were acquired.
利用复阻抗分析进一步研究了元件在不同的湿度环境中的导电类型和等效电路。
The conduction types and equivalent circuits have made further study based on complex impedance plots of the sensor in different relative humidity.
电导体用来导电，例如一个电路中的金属线。
Electrical conductors are used to conduct electric current, as in the metal wires of an electric circuit.
一种显示装置包括电路板和表面接地部分，该表面接地部分设置在电路板的端部分上并且由导电层形成。
A display apparatus including a circuit board and a surface grounded portion which is disposed on an end portion of the circuit board and formed of a conductive layer.
一对导电端子(12)中的每一个可被布置于电路板的相对表面上，以使得LED(26)的引线(28)横跨电路板的上部边缘。
Each one of a pair of conductive terminals (12) may be located on opposite surfaces of the circuit board so that the leads (28) from an LED (26) will straddle an upper edge of the circuit board.
铜合金引线框架材料因其高强高导电性能而成为集成电路框架材料的主体。
Copper alloys for lead frame are becoming leading factor in the lead frame materials for IC, because of its high strength and high conductivity.
铜合金引线框架材料因其高强高导电性能而成为集成电路框架材料的主体。
Copper alloys for lead frame are becoming leading factor in the lead frame materials for IC, because of its high strength and high conductivity.
应用推荐