真空沉积法的优势在于它可以制出高品质的薄膜，从而成为高导电性的材料。
The advantage of vacuum deposition is that it's possible to make very high-quality films, which result in materials with higher conductivity.
方法：以穴位导电量为指标，分别在不同季节系统测量灵龟八法穴位在“开”“闭”状态的导电量。
Methods The electric conduction quantity of acupoints selected with Linggui Bafa at opening and closing states was measured systematically in different seasons.
本文利用矢量表面辐射条件(VOSRC)和矩量法(MM)分析了导电圆球存在时线天线的性能。
Vector On-Surface Radiation Condition (VOSRC) and Moment Method (MM) are applied to analyzing the performance of a wire antenna in the presence of a conducting sphere.
用热等静压法烧结制备了高导电性ZAO（铝掺杂氧化锌）陶瓷靶材，并用直流磁控溅射法制备出ZAO透明导电薄膜。
Aluminum-doped zinc oxide (ZAO) ceramic targets for sputtering were fabricated by hot isostatic pressing (HIP) and ZAO transparent conducting thin films were prepared by dc magnetron sputtering.
介绍了一种可测试所有导电和非导电纤维横截面积的非接触式静电共振法。
The contactless electrostatic resonance method to determine the cross sectional area of conductive and unconductive monofilament was introduced.
采用溶液共混法将聚苯胺溶液与丙烯酸树脂共混，制备了双组分导电涂膜。
The blend of polyaniline and polyacrylate was made by solution process, which is further used to prepare the conductive coatings film.
现阶段运用最多的是利用油气与水的导电性质和介电特性的差异识别井内流体的方法，例如电导法，电容法等。
The present stage common method is utilize electric conduction nature and dielectric characteristic difference to recognize fluids, for example conductance method, electric capacity law and so on.
利用子域基和物理模式基两种不同基函数下的矩量法对平面波照射下的理想细导电圆柱的单站RCS进行了计算和分析。
The article calculates the perfectly conducting thin cylinder RCS in incidence of TM plane wave by using the two different basis MOM.
分析铜质导电零件沥青胶质油污的形成，在生产实际中采用强酸强碱热态中和法，有效地去除胶质油污。
In practice, asphalt-colloid smear was formed on copper electric parts and effectively purged by means of thermal neutralization with strong acid and alkali.
多种工艺可以用来制备透明导电薄膜，如磁控溅射真空反应蒸发、化学气相沉积、溶胶-凝胶法以及脉冲激光沉积等。
Many processes are used to prepare transparent conductive films, such as magnetron sputtering, vacuum reactive evaporation, chemical vapor depositions, Sol-gel, laser-pulsed deposition.
通过热电阻和循环伏安法实验，测定了碳纳米管膜电极的导电性和电化学性质。
The properties of the conductance and electrochemistry of the carbon nanotube film electrodes are measured by thermal resistivity and cyclic voltammetry experiments.
利用直流双电极法研究了碳纤维砂浆（CFRM）和碳纤维混凝土（CFRC）的导电性能与其龄期之间的关系。
The relationships between DC resistance of carbon fiber reinforced mortar (CFRM) and carbon fiber reinforced concrete (CFRC) and curing age were studied by using the two-probe method.
直流特性法分析表明，材料属电子-离子混合导电机制，且离子电导成分越多材料的湿敏特性越好。
The analysis of the characteristics of direct current shows that the material conductance is electronics-ion and the properties of the material are better with more composition of ion conductance.
电火花加工法对加工超韧性的导电材料(如新的太空合金)特别有价值。
Electrical discharge machining has proved especially valuable in the machining of super-tough, electrically conductive materials such as the new space-age alloys.
采用化学镀法在碳纳米管表面包覆金属银，从而获得了导电性极好的纳米银-碳复合管，并以该复合管为导电功能体制备导电胶。
In order to obtain better conductive functional filler and conductive adhesive, the surface of carbon nanotube (CNT) was wrapped by silver using chemical plating.
本论文在不使用膜板的条件下，在不同阳极片上采用一步法电化学聚合制备导电聚苯胺的纳米结构。
This dissertation presents a simple method (free-template) that provides conducting polyaniline nanostructures on different anodes via one-step electropolymerization.
介绍了用循环伏安法确定导电聚合物能隙和能带参数的方法。
Energy gap and energy band parameters were determined by using cyclic voltammetry.
利用直流双电极法研究了碳纤维砂浆和碳纤维混凝土的导电性能与其龄期之间的关系。
Relationships between DC resistance of CFRM and CFRC and curing age were researched using the two-probe method.
和电阻率法一样，EM法也能提供构造方面的资料，如断层、剪碎带或蚀变导电带。
EM, like resistivity, can also give structural information: faults, shear or altered conductive areas.
该文采用小波矩量法求解导电平面上的三维腔体散射，利用小波变换稀疏化矩量矩阵，加速其求逆，减少了腔体散射的总体计算时间。
Scattering from three-dimensional cavities is solved using the wavelet-MoM method, while the moment matrix is sparsified with help of the wavelet transform.
该工艺方法较之以往的高频加热法和管材导电加热等工艺方法，具有焊速快、生产率高、成本低等优点。
Compared to HF heating and other methods, it is with high welding speed, high production, low cost.
传统的焊接方法采用导电阻焊法，焊接效率低，易损伤铜排和绝缘层。
But the traditional welding method of brazen winding relies mainly on conduction heat, it is easy to damage the winding faces as well as less efficient.
通过对导电炭黑填充量对导电性能的探索，优选了集经济性、工艺适性于一体的油炉法炭黑。
Through study the effect of carbon black filler content on conductivity, oil furnace carbon black with good economy and technology was selected.
本文利用有限元素法和导电纸模拟试验的方法，对悬式绝缘子的电场分布进行了分析计算。
Using the finite element method and the method of conductive paper analogue test, the analysis and calculation of the electric field distribution of the hanging insulator is carried out.
利用积分方程法实现了均匀导电半空间三维大地电磁响应的数值模拟。
Using integral equation method, the numerical algorithm of 3D magnetotelluric responses in homogeneous half-space is realized.
用三维控制容积法推导了传热、导电的有限差分方程。
The finite difference equations was deduced using three dimensional control volume method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
应用推荐