分析了适用于导电混凝土的导电相材料的性能要求以及常见类型。
The property requirements and common types of conductive paste materials applicable for conductive concrete, were analyzed.
探讨了经典电子论对金属导电解释的缺欠，具体分析了引起矛盾的因素；
This paper discusses defect of interpretation of metal conduction's classical electron theory, and analysis factors of contradiction.
实践证明，该方法在进行导电金球连接性能失效分析及LCD器件的可靠性设计及验证方面有较大的帮助。
It is shown that this method is useful for the failure analysis of LCD conductive gold spacer joint performance and the reliability design and validation of LCD devices.
采用交流阻抗谱分析研究了样品的氧离子导电性能。
The oxygen ionic conducting properties of the ceramic specimens were examined by impedance spectroscopy analysis.
XPS能谱及交流阻抗谱分析显示可能存在氧空穴导电。
The analysis of XPS reveals the possibility of oxyanion hole conduction.
对户外隔离开关导电回路产生过热的原因进行了分析，为解决各种过热问题，提出了一些具体的办法。
This paper analyses the reason causing the overheat of conducting circuit for outdoor disconnector and puts forward some methods for solving the overheat on the various contact connections.
对器件的亚阈区导电和RF等特性的热载流子退化，也作了相应的分析。
The degradations of device output conductance, subthreshold conduction and RF characteristics are also analyzed.
本文利用矢量表面辐射条件(VOSRC)和矩量法(MM)分析了导电圆球存在时线天线的性能。
Vector On-Surface Radiation Condition (VOSRC) and Moment Method (MM) are applied to analyzing the performance of a wire antenna in the presence of a conducting sphere.
依据导电沟道内的电势分布，分析沟道宽度变化对OSIT工作特性的影响。
Depending on the potential distribution in the conductive channel, the influence of changing channel width on the operation characteristic of OSIT is analyzed.
用有限元程序分析了外部环境对导电混凝土用于融雪化冰时效果的影响。
The finite element method is used to analyze the influence of external circumstances on effect of deicing or snow melting system by electrically conductive concrete.
所述方法包括使分析物能够结合到至少两个导电表面之一的步骤。
The method comprises the steps of allowing an analyte to bind to one of at least two conductive surfaces.
用有限元程序成功地分析了导电混凝土除冰化雪系统。
The finite element method is introduced to analyze deicing or snow melting system successfully.
利用极化理论和高频方法对有限长理想导电圆柱后向散射场的极化特性进行分析和计算。
The polarization characteristics for the fields scattered by finite length perfectly conducted cylinder are presented in this peper, using the theory of radar polarization and high frequence analysis.
通过实验分析，证明铝导电浆料经印烧后与PT C热敏电阻器有良好的欧姆接触。
This article verified with experiments that aluminum conductive paste has very good ohm contact with PTC thermistors after printing-sinter.
通过溶胀曲线测定、红外光谱分析、复阻抗分析等手段对材料的结构与离子导电性能进行了研究。
Tests of swelling curves, infrared spectra analysis and complex impedance analysis were carried out to understand structure and ionic conductive properties of the samples.
分析了偏置导电环对阵列感应测井仪器响应信号的影响规律。
Analyzed is influence of eccentric conductive ring on signal responses in the array induction log tool.
本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illustrated.
分析了炭纤维导电性能与炭化温度的关系，解释了炭纤维导电性的宏观表现与微观结构之间的联系。
The correlation of electric conductivity of carbon fibers and carbonization temperature was analyzed. Macroscopic display of CF electric conductivity was explained by microstructure.
为此，对变电站所在地的土壤进行了电阻率调查，分析了导电混凝土的特性及其技术经济指标，最终确定了地网方案。
Therefor, the soil resistivity of the substation is investigated; the features and the techno economical indexes of conducting concrete are analyzed, thus setting the scheme of the ground net.
测试了高导电铬铜合金在各种热处理状态的导电率、硬度和力学性能，并分析了性能变化及金相组织。
The electrical conductivity, hardness and mechanical properties of Cr Cu alloy in various heat treatment states are tested and its properties and microstructure variations are analyzed.
本文对微电子固体薄膜结构，以及影响薄膜电阻导电性和稳定性的因素进行了研究和分析。
This paper study and analysis microelectronic solid film construction and factor that effect the film resistor conductivity and constantity.
分析研究轴承磨加工工序所用的切削液，并选出新型环保导电聚苯胺水性防锈切削液进行试验。
Through analysis and research on cutting fluid used by the bearing grinding process, new environment protection conducting polyaniline water-based antirust cutting fluid is selected.
本文在分析了纺织纤维导电特性和介电特性的基础上，试验验证了纤维交流导电浴盆效应。
In the dissertation, on the basis of analyzing the electric and dielectric conductivity, the bathtub effect of the alternating conductivity of the fiber was verified by the test.
然后把热载荷和电场力同时作用在模型上，分析两者对导电聚合物的共同作用效应。
Then the deformations of the conductive polymers are simulated under thermal and electric joint load.
超导电力设备是超导电力系统的重要组成部分，而仿真分析一直是设备开发的重要手段之一。
The superconductive electrical equipment is an important part of superconductive electric power system and the simulation analysis is one of the main means in equipment development.
分析了包覆导电混凝土钢接地体腐蚀的原因。
The reason for corrosion of the grounding steel conductor in surrounding conductive concrete is analyzed.
依据导电沟道内的电势分布，分析了栅极长度变化对OSIT工作特性的影响。
Depending on the potential distribution in the conductive channel, the influence of changing gate length on the OSIT s operation characteristic is analyzed.
高温超导电动机(HTS)的理论模型由二维电磁场分析软件完成。
A theoretical model of high temperature super-conducting (HTS) motor was presented by two-dimensional electromagnetic field analysis.
高温超导电动机(HTS)的理论模型由二维电磁场分析软件完成。
A theoretical model of high temperature super-conducting (HTS) motor was presented by two-dimensional electromagnetic field analysis.
应用推荐