由于模型和载荷的对称性，这里取CSP结构中包含一个焊盘的部分进行分析。
As the model and load symmetry here take CSP structure contains a pad part of the analysis.
通过三幢平面布置基本对称的多层建筑结构地震实测结果，分析偶然扭转的影响。
Accidental torsion influences on building structures are analyzed resorting to the recorded motions of three multi-storey buildings with nominally symmetrical plan during earthquake.
根据塑性理论对汽车上一个非对称异形零件的摆辗模具结构进行了分析计算，但是在实际中始终存在模具寿命较低的缺点。
Structure of the rotary forging die of a none symmetrical abnormal part have been analysed and calculated based upon plastic theory, however lower service life of die in mass production.
本文利用群论建立起一套分析对称结构系统的有力的计算方法。
In the paper using group theory a systematic and powerful computational methods are established to analyse symmetric structures.
对船用舵机泵控系统中位置控制单元的三通阀控制非对称缸和四通阀控制对称缸的两种设计方案进行了理论分析和系统结构分析。
Two design strategies that three-way valve control unsymmetrical cylinder and four way valve control symmetrical cylinder were analyzed from principle and system structure aspects.
同时，对存在的不对称结构也作了相应的分析处理。
Also, their asymmetric structure has been analysed and treated specially.
对一类稳定的具有符号反对称结构的系统进行鲁棒稳定性分析，讨论其鲁棒镇定控制设计问题。
The robust stability analyses for a class of systems with sign-skew symmetric structure are given, and robust controllers design of the systems is discussed.
用算例分析了结构在不同耦合刚度下非对称参数对颤振速度影响的变化规律。
Examples were presented to analyze the effects of asymmetrical parameters on the critical flutter velocity under different coupled stiffness.
针对量热式生物传感器的参比法测量及流动分析的特点，恒温器采用相同结构参数的双流路对称布置。
The thermostat is disposed symmetrically by two same flow ways aiming at the character of the biosensor:the referential means and the flow injection analysis.
旋转对称性是计算机视觉形状分析中的一类重要结构属性。
Rotational symmetry is one of the important structural properties of shape analysis in computer vision.
本文首先建立二维对称结构模型，用于不锈钢电阻点焊预压接触分析。
In this dissertation, a two-dimensional symmetric model was built for contact preloading analysis of resistance spot welding of stainless steel.
通过对产权制度、组织结构和经营管理体制的分析，发现我国商业银行经营管理中存在着严重的信息不对称。
By analyzing property rights, organizational structure and management system, it is found that information asymmetry is serious in the operating management of commercial Banks in China.
通过理论分析，提出利用对称性求解超静定结构时应注意的问题，避免因惯性思维造成最后内力图校核出现错。
By theoretical analysis, the considerations were put forward about the check with symmetry solving hyperstatic structure, avoiding internal force diagram check errors caused by inertial thinking.
分析不对称性对具有近频的对称结构振型的局部化影响。
The asymmetric effect on the mode localization of a symmetric structure is analyzed.
本文运用增量理论和子结构方法在具体分析组合轴对称问题的基础上，提出了解决一般弹性接触问题的新方法。
Basing on the analysis of combined axial symmetry problem by the increment theory and substructure method, this paper presents a new method for solving the elastic contact problem in general.
故本文方法可用于非对称框架结构的抗震分析与设计。
So this procedure can be applied in seismic analysis and design of the asymmetric frame structures.
采用多级模态综合技术并利用结构旋转对称的特点，建立包括转动部件和固定部件在内的水轮机整机系统动力特性分析模型。
A model for dynamic analysis on a whole hydroelectric machine system was studied by multiple step mode synthesis technique, which consists of rotary and fixed components.
本文在分析了非对称同步fifo的结构特点及其设计难点的基础上，采用VHDL描述语言，并结合FPGA，实现了一种非对称同步fifo的设计。
On the base of analyzing the structure and the design difficulty of the asymmetric synchronous FIFO, an asymmetric synchronous FIFO is achieved by using VHDL language and FPGA in this paper.
本文分析了常用对称密码算法DES、3des和AES的可重构性，利用流水线、并行处理和可重构技术，提出了一种可重构体系结构。
In this paper, based on the analysis about the reconfiguration of the DES, 3des and AES, we propose a reconfigurable architecture, which combines reconfiguration technology with pipeline, par.
最后对大跨屋面结构在非对称热力作用下的极限状态进行了分析。
Further study on large - span dome structure is carried out to investigate its limit - state behavior due to non-symmetric heating.
在讨论了碳纳米管的几何结构的基础上，对齿型和椅型碳纳米管的对称性进行了分析并将这些对称元进行了抽象和总结。
The geometric structure of carbon nanotubes (CNTs) is introduced, the symmetry of zigzag and armchair CNTs is analyzed and these symmetry elements are abstracted and summarized.
利用轴对称圆柱壳有矩理论进行结构分析、设计，并在施工现场进行了一系列应力、应变和变形测试。
Structure can be analyzed and designed by using the axisymmetrical cylindrical shell theory with moment. A series of stress strain and displacement tests are carried out in situ construction.
利用其结构的空间对称性，计算出该理想模型半球壳顶端附近的电场表达式，并对电场特性作简单分析。
With the structure symmetry, the expressions of the electric-field on the point of a half conductor cylinder are given, and the electric-field characteristics are analyzed.
从传统的金融市场微观结构理论出发，通过间接的方式分析了非对称信息对资产价格的影响。
Based on the traditional market microstructure theories, the impact of asymmetric information on asset price is analyzed indirectly.
基于动力学和弹塑性力学理论，采用轴对称有限单元法系统地分析了软土地基上半刚性基层沥青混凝土路面结构体的工作性状。
On the basis of the theory of dynamic mechanics and elastic-plasticity mechanics, the asphalt pavement of semi-rigid subbase on the soft clay ground is analyzed using the axisymmetric FEM.
本文对索承穹顶结构在轴对称荷载作用下的分析进行研究，并用能量变分原理进行求解。
In this paper the analysis of cable-supported dome structure under axisymmetrical loading is discussed and solved by the energy variational principle.
在产品质量信息不对称的基础上分析了商业银行的市场结构和竞争效率问题。
On the basis of asymmetric information on the product quality, the paper analyses the relation between market structure and the competitive efficiency of the commercial bank.
在产品质量信息不对称的基础上分析了商业银行的市场结构和竞争效率问题。
On the basis of asymmetric information on the product quality, the paper analyses the relation between market structure and the competitive efficiency of the commercial bank.
应用推荐