在此基础上，建立了以单晶硅为工件材料的分子动力学仿真三维模型，对不同深度下的加工过程进行分析研究。
Then, based on these theories, the three-dimensional model with using monocrystal silicon as the workpiece is built and the processes of different grinding deepness is studied.
就模具结构对玉米秸秆粉粒体材料压制杯形工件的影响进行了研究。
This experiment studied the influence of mold design on molding a cuppy product from maize stalk powder.
通过对椭圆形工件的磨削实验研究，为非圆零件的高效精密磨削提供了好的解决方案。
The grinding experiment research of elliptic parts provided an ideal solution for the high-speed precise grinding of non-circular parts.
以压电陶瓷微位移原理为基础，对精密驱动技术在精密定位工件台上的应用作了实验研究。
Based on the principle of micro displacement of piezoelectric ceramic, the research on the precise actuator technique is presented, which is used for precise positioning work piece stage.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
通过对精密加工件分配阀体主阀孔的加工工艺试验及研究，总结了一套行之有效的加工工艺。
A complete processing technology is summed up for the main valve opening of the dividing control valve in the fine machining pieces based on the study and test.
在切削加工中，为了提高已加工工件的表面质量，需要研究切削速度和进给量对已加工工件残余应力的影响规律。
The effects of cutting speed and feed on residual stress of workpiece machined should be studied to improve surface quality in machining.
本文对双轴柔性滚弯技术原理进行了分析，对工件的回弹现象及其回弹规律进行了比较深入的研究，得出工件的回弹公式；
The principle of TABTER has been analyzed firstly and the formula of bending springback has been obtained from deep research on bending springback phenomenon and rule of workpiece.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
采用实验研究和数值模拟的方法，分析了工件预加工孔径和孔型参数对厚壁筒体翻孔工艺的影响。
Influence of the workpieces pre-hole diameters and passes on thick-wall cylinders hole flanging is investigated by experiment and numerical simulation.
研究了工件的上盘方法以及抛光压力、自转公转速度、抛光液浓度对抛光质量的影响；
The hanging methods of workpiece and the effect of intensity of pressure, concentration and speed ratio on quality of finish are studied;
本文研究了激光精密打孔中，激光束性能、光学及工件系统参数对孔质量的影响。
In this paper, we study the effects of laser beam characteristics as well as optical and working system parameters on holes quality in laser precision drilling.
由于切削时的温度场对刀具磨损的部位、工件材料性能的变化、已加工表面质量都有很大的影响，因而对温度场的研究也显得尤为重要。
Because the influence of temperature to tool area, work material performance's variety and the machined surface's quality, the research to temperature field in metal cutting is very important.
本文研究了在不同作用时间、不同工件转速、不同入射角度等条件下离子束对CLBO晶体抛光表面的处理效果。
Ion beam etching (IBE) was applied to treat the as-polished surfaces of a CLBO crystal with varying in rotation speed of clamp, etching times and incidence angles.
从等距型面轴曲线轮廓特点出发，研究了等距型面的曲线方程，尝试对磨床进行改装，给磨床安装一附件进行合理的运动分配，使工件与刀具完成协调运动，加工出等距型面轴。
We try to refit grinding machine and install an attachment which can do reasonable distribution of the movement so that workpiece and cutting tool complete coordinated movements.
分析与测量了抛光模与工件盘之间的抛光力，并对如何控制与测量进行了研究。
This paper deals with the analysis and measurement of applied foroes between polishing plate and work holder, and makes an investigation on how to control and measure the polishing force.
首先对金刚石砂轮磨削加工聚晶金刚石的磨削力和磨削温度进行了测试和分析，利用扫描电镜对工件加工表面进行了微观分析研究。
The force and temperature of polycrystalline diamond grinding with diamond wheel are tested and analyzed, the machined surface is investigated with scanning electron microscope.
本文对如何在半结构化环境中利用双目立体视觉进行工件的空间三维定位进行了探索与研究。
Binocular stereo vision has incomparable advantages over monocular vision and it is a preceding research area of machine vision.
针对敞开式压缩模在生产中出现的问题，对工件进行分析研究，提出新的工艺方法，以冷挤压工艺取代冷冲压工艺。
On the problem of open compression die emerged in production, the part is analyzed and a new processing method is put forward. Cold punching technology is replaced by cold extrusion technology.
本文研究了辉光放电离子轰击钎焊时阴极溅射现象对工件表面的净化作用。
The surface cleaning action, caused by the cathode sputtering phenomenon in ion bombardment brazing in glow discharge is investigated in this paper.
研究表明，微磨料水射流对工件表面具有良好的抛光作用，并能在抛光的同时提高工件表面硬度、表面的疲劳强度，且硬度低的工件表面效果较为明显。
The results show that abrasive water jet polishing surface has a good effect and can improve the surface hardness, surface fatigue strength. The lower the surface hardness, more obvious the effect.
对厚壁件内孔拉削精度进行了试验研究，结果表明：刀具初期磨损阶段，工件孔径尺寸偏大，且变化较快；
Experimental study of broaching precision of heavy wall workpiece shows that workpiece aperture turns large in initiative wearing stage of the tool, and the change is fast;
最后，对刀位文件进行后置处理，将课题研究中提出的理论和算法应用到了叶轮的加工中，通过在五坐标数控机床上对实际工件的加工，验证理论分析的正确性。
Finally, CL data transformed to NC code through post-process. Then the theory and algorithms are proved to be validity through putting the the results into the practical 5-axis NC machining.
研究表明，速比对工件波纹度有较明显的影响，砂轮特性和修整用量对工件波纹度也有一定的影响。
On the basis of experiments, the relations between grinding parameters and results indicate that speed ratio has an obvious effect on the grinding waviness, and characters of gr…
研究表明，速比对工件波纹度有较明显的影响，砂轮特性和修整用量对工件波纹度也有一定的影响。
On the basis of experiments, the relations between grinding parameters and results indicate that speed ratio has an obvious effect on the grinding waviness, and characters of gr…
应用推荐