格栅法是实验应力分析中最古老的技术之一。
The grid method of strain analysis is one of the oldest techniques known to experimental stress analysis.
实验应力分析模拟结果与有限元数值法吻合较好。
The simulated results from experimental stress analyses agree with calculating data of finite-element numerical method very well.
将图像处理技术应用于实验应力分析，取得了理想的效果。
Some techniques of image manipulation were applied to stress analysis and the result was perfect.
在实验应力分析中，用解析法进行应变花的应力分析，既费时又费工。
The analytical method of stress analysis strain rosette takes much time and Labour in the experimental stress analysis.
用电测法对外周边固定、内周自由、受均布载荷的环板进行实验应力分析。
Expcrimental stress analysis by electrical measuring method was carried on the ring plate with fixed outer perimeter, free inter perimeter and received even load.
本文用全息光弹法对50吨自动脱钩钩体进行了实验应力分析。给出全部所需数据。
This paper describes the application of holographic photoelasticity to the analysis of the contact stress of a 50-ton automatic disengaging hook, and gives all the data needed.
用有限元法和实验应力分析法对波纹换热管在内压作用下的应力分布规律进行探讨。
Stress distribution rule about corrugated tubes for heat exchanger under the interior pressure was studied by finite element method and experiment investigation.
讨论了用光弹性嵌片法(一种新的模型试验方法)进行飞机主起落架的实验应力分析。
It is discussed that the method of photoelastic embedment (a kind of new model test method) is applied to experimental stress analysis of aircraft main landing gear.
出版这本实验应力分析学会(SESA)专集的目的，在于用几个章节把分散的有关断裂力学实验技术的资料汇编成册。
The purpose of the SESA monograph is. to assemble, in several chapters, experimental techniques related to fracture mechanics.
在模型实验应力分析中采用脆性涂料法确定模型机架最大主应力部位和主应力方向，采用电阻应变测量法确定模型机架的主应力水平。
Stress coating is adopted in order to determine the points and directions of the most main stress of the frame, resistance strain gauge method used for determining main stress value of the frame.
应用传统强度理论和细观力学方法对几种韧性材料在复合载荷条件下的断裂机理、启裂位置、开裂方向进行了实验分析和应力场计算。
In this paper, fracture mechanism, position and direction of crack initiation of mixed mode fracture in several ductile materials are tested, and stress distributions of which are analyzed.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
完成了用激光拉曼光谱法测定焊后金刚石磨粒残余应力的实验研究工作，实际测得的残余应力分析的规律与模拟结果相一致。
The measuring experiment of the residual stress of the brazed diamond grains by Raman has been finished. And the results are consistent with the modeling ones well.
并通过光弹性应力分析的实验，验证了该结论的正确性。
The validity of that conclusion is proved by the photoelastic test of the stress analysis.
用网格法测量了半球形冲头胀形时的应力分布，并将有限元计算结果与实验结果进行了对比，验证了有限元分析结果的可靠性。
To verify the reliability of FEM results, the stress distribution of deformation is measured with mesh method, and the analysis results are compared with the experimental results.
单腿站立位的应力分析显示与以往实验结果基本相符。
The stress analysis at single support phase was the same as the results of previous experimental data.
对计算得到的轮包成形极限图、应力应变分布图进行了分析，并采用基于网格分析法的物理实验验证了有限元建模的可靠性和正确性。
The validity of modeling, the accuracy and reliability of simulation results for stamping forming processes of hubcap are affirmed on the basis of grid strain analysis technique.
本文应用三维边界元法和三维有限元法对有挡锚链进行了三维应力分析，并将其结果与电测实验数据作了比较，吻合得很好。
This paper analyses three-dimensional stress distributions of the stud anchor chain by the theory of finite element and boundary element.
通过对身管自紧的残余应力、残余应变及残余位移分析，证明其计算结果与实验结果相当吻合。
It is proved that the computed results are in agreement with the experimental results by analysing the residual stress, strain and displacement of gun autofrettage.
利用光弹性实验对非等长度组合厚壁筒进行应力分析，验证了有限元计算结果。
The stress of assembled circular tubes with different lengths was analysed with photoelastic test, and the calculated result by finite element method was probed.
结合某实际工程的现场实验，通过建立精细有限元模型对现浇预应力空心板梁楼盖体系进行了分析。
Based on the full scale experiment of an engineering project, the finite element method was applied to analyze the bonded-prestressed plate-beam system.
本文利用有限元方法计算分析了锻压机架的结构应力，并用模型实验检验了有限元计算的正确性。
This paper analyzes the structural stress of a forge press by finite element method, and tests and verifies its correctness by the model experiment.
该文运用实验的方法对木材切削加工所用的圆锯片上的温度分布进行了测定，据该温度梯度对圆锯片的热应力进行了详细的分析和计算。
This paper analyzes and calculates the thermal stress in the blades of circular saws used in cutting wooden pieces based on the detecting of temperature differences.
在模拟分析的基础上，设计了一种基于应力、位移、空间角度的多参数可调谐的光纤光栅波长调谐器，并进行了实验验证。
The basic principles of multi-parameter tunable optical fiber grating wavelength tuner based on stress, displacement, space angle are analyzed and relative experimental researches are performed.
只是由于单层钎焊工具的特殊性和复杂性，有关它的残余应力的量化分析和实验测定都存在很大难度。
But the particularity and complexity of monolayer brazed diamond tools has blocked the analysis of the residual stress.
分析了岩石的多孔隙特性、强度实验的全应力-应变曲线、蠕变特性曲线和松弛特性曲线。
Rock's characteristic of multi-interspace, the complete stress-strain curve in strength tests and characteristic curve of creep and relaxation are analyzed.
本文实验分析人体关节盘和二种人工关节盘材料的粘弹特性，即本构关系、滞后特性、应力松弛和蠕变特性。
In this paper, the viscoelastic constitutive equation, the hysteresis, the stresses relaxation and creep of the materials of the articular disc and two kinds of artificial articular disc are analysed.
介绍了锚杆测力托盘的制作方法，在实验室对锚杆托盘的应力分布进行了分析。
Manufacture method of anchor bolt plate is introduced and stress distribution in laboratory is analyzed in this paper.
介绍了锚杆测力托盘的制作方法，在实验室对锚杆托盘的应力分布进行了分析。
Manufacture method of anchor bolt plate is introduced and stress distribution in laboratory is analyzed in this paper.
应用推荐