分布式实时系统软件在大小和复杂性方面都在不断增加。
Distributed real-time system software in size and complexity are increasing.
本论文在改进的声呐脉冲侦察模块硬件系统的基础上，开发了一套实时系统软件。
In the thesis, a series of real-time system software of sonar pulse detection is developed on an improved hardware system.
本文以自主飞行机器人控制系统项目为研究背景，对基于ARM处理器核的嵌入式实时系统软件构造做了分析。
This thesis works at the back ground of Autonomous Flight Robot project. Thedesign of Embedded Real-Time System software based on ARM (Advanced RISCMachine) is given.
在这个系统的开发过程中，利用CMM模型对实时系统软件生命周期各个阶段进行过程管理和过程改进，实践了本文基于CMM的实时系统开发思想。
During this system 's development, the way of applying CMM to development is practiced, managed and improved every develop phases in software life cycle.
本文论述了实时管理环境下测试系统软件设计的基本策略及特点。
This paper discusses a designing method of the software within real-time managing environment for test system.
本文就实时应用领域中小规模嵌入式计算机系统软件可靠性和鲁棒性进行了分析。
This paper analyses software reliability and robustness for Small scale embedded computer systems in real-time application.
在嵌入式系统中，随着多核处理器的应用，相应的系统软件，如实时操作系统、并行编译器等也日益成为研究的热点。
In the embedded system, along with the application of multi-core processor, the system software such as Real Time Operation system (RTOS) and parallel compilers are becoming a research hotspot.
采用人工神经网络模型中BP模型对现场的钻井工况进行卡钻预测，并开发了人工神经网络实时卡钻预测系统软件。
BP model in artificial nerve net model is adopted to predict stuck operating mode in drilling well and artificial nerve net software in predicting system is developed in the paper.
电控系统软件采用实时模块化编程，具有编程灵活，移植性和扩展性好的特点。
The software was designed on the basis of real-time and modular principle characterizing good flexibility, transplant convenience and extending possibility.
详细地论述了计算机数控系统软件设计的可靠性和实时性问题。
This paper discusses the issues of reliability and real time on CNC system software.
通过监测系统软件设计，实现对采样数据、波形和图形进行实时屏幕显示，对表面疲劳裂纹扩展进行动态监视。
The sampled data, sampled waveform and graph can be real time displayed, so that a supervision for the status of surface fatigue crack growing can be accomplished.
依托MIS网络系统平台，通过DCS系统获取生产实时数据，开发应用了耗差分析系统软件。
Depending on MIS network system platform, get production datum by DCS system, develop power consumption analysis system soft ware.
该系统软件采用模块化的C语言和汇编语言混合编程，显著提高了异步电机故障诊断的实时性和准确性。
Modular mixture programming of C language arid assemble language is adopted in the system software, which greatly improves real-time properties and accuracy of fault diagnosis of asynchronous motor.
介绍了以自动化全站仪为基础组成的自动极坐标实时差分监测系统的构成、系统软件。
This paper introduced the software of auto-polar coordinate real time difference monitoring system, which is based on the full automatic control station.
最后设计了气辅注射成型高精度实时注气控制系统软件，实验证明该控制系统控制性能良好，能达到令人满意的控制效果。
Then, a software with simple operation and complete function designed for the gas-injection control of GAIM is developed, whose control effect is proved to be perfect by experiments.
针对实时嵌入式系统在轨维护需求，提出了一种基于FPGA的嵌入式系统软件在轨重注方法。
According to the requirement of on-board maintenance for real-time embedded system, a novel method for software on-board reprogramming was suggested based on FPGA.
在嵌入式数字电视终端系统软件的设计中，由于终端硬件资源有限和实时性的要求，造成其软件设计具有较高的复杂度。
Software design in embedded system software for digital television receiver is very complex for the limitation of hardware resource and requirement of realtime processing.
介绍了烧结试验实时监测系统的总体结构，烧结试验系统软件的功能及软件设计特点。
The general structure of real - time monitoring system for sintering experiment, the function of real - time monitoring systems software, and the characteristics of software design are introduced.
讨论了一种基于PC总线的PC数控系统的结构及其有关的关键技术问题，并提出了该结构下数控系统软件的一种实时控制任务调度的面向对象实现方法。
This paper discusses a PC-NC system based on PC bus and some relevant key technologies, and presents a method of realization of dispatching real-time tasks in the software part of system.
主要完成了系统方案设计、系统硬件设计、系统软件设计、系统调试、实时性分析等项工作。
The works are composed of system plan design, system hardware design, system software design, system debugging and analysis of real-time capability etc.
结合开发成功的实时软件《中英文综合录井联机系统软件》，探讨实时软件开发的方法和可靠性。
Based on the practice of developing real time software "chinese-english well logging on-line system", this paper describes the method of developing the real time software and its reliability.
在5轴加工中，为使机床CNC系统能根据刀位点数据实时生成机床运动坐标，必须在CNC系统软件中加入机床运动空间坐标变换算法。
In order to generate the motion commanders of CNC machine tools, the coordinate conversion algorithm must be added into CNC system in 5-axis machining.
介绍了基于机器视觉的坯布疵点实时检测系统软件部分各主要环节的具体实现。
An intelligent detection system of the loom stare flaw based on machine vision was introduced and the software realization of the main parts in the system was given.
该系统采用模块化结构，配有实时操作系统软件及高速数据通信接口，可以完成多自由度的实时规划与控制。
Modular structure is used in the system, real-time planning and control for 7-dof is implemented with real-time operating system software and high speed data communication interface.
介绍了在DOS环境下工业测控系统中实时多任务系统软件的实现方法；并讨论了抗干扰软件的设计。
The method to achieve real time multitask under DOS in industrial monitor system is presented, and it can resolve the demand of real time and multitask with a collateral system.
介绍了在DOS环境下工业测控系统中实时多任务系统软件的实现方法；并讨论了抗干扰软件的设计。
The method to achieve real time multitask under DOS in industrial monitor system is presented, and it can resolve the demand of real time and multitask with a collateral system.
应用推荐