阐述了新型无线感应技术的原理,给出了一种有轨移动体定位电路。
The principle of the new wireless induction technology is expounded. Also given is the location circuit of rail moving objects.
仿真试验表明该方法故障定位精确度高、撕裂迅速,有利于大规模模拟电路故障诊断过程自动化的实现。
Simulation confessed: the method has high location precision and fast decomposition rapid, which can be applied to diagnose large-scale analog circuit fault.
本文提出了定位奇偶检测电路多重故障的简单而有效的算法。
A simple and efficient algorithm for locating multiple faults in parity check circuits is presented.
这个装置包含了一个无线电话电路,全球定位系统单元,一个扬声器和一个喇叭。
The device includes a cellphone circuit, a GPS positioning unit, and a microphone and loudspeaker.
本文提出了奇偶校验与生成电路多重故障检测和定位的一种简便算法。
This paper presents a simple algorithm for multiple fault detection and location in parity check networks.
设计特殊电路和有针对性的控制算法,实现对压电陶瓷的快速驱动与高精度定位的结合。
Special circuits and pertinent control algorithm realize the combination of quickly driving and precising positioning.
提出了一种基于统计理论与智能信息处理技术的容差模拟电路故障检测与定位新方法。
Based on statistics theory and intelligent information processing technology, a new method for fault detection and location in analog circuits with tolerance was presented.
确保可逆电路的正确性与可靠性,错误检测必不可少,错误定位难度更高。
To ensure the validity and liability of the reversible circuits, fault detection and fault localization are necessary.
本文提出模拟电路故障定位的一种新方法——故障屏蔽方法。
Fault screen method, a new method for fault location in analog circuits, isp-resented.
本文介绍了TP801组成的精密定位系统以及其接口电路和软件设计。
This article introduces the accurate positioning system with TP801 which include the interface circuit and the software design.
阐述了双频干涉仪的定位原理,以及在应用CPLD设计、制作其功能电路时遇到的问题和解决方案。
The positioning principle of double - wavelength interferometer, the problems met in designing and manufacturing of CPLD functional circuits and the solving methods are described in the paper.
基于TMS320F 2812的自由空间激光通信快速定位跟踪系统,由四象限探测器、高速放大电路及DSP2812构成。
The fast orientation tracking system with free space optimal communication based on TMS320F2812 consists of four-quadrant detector, high-speed amplificatory circuit and DSP2812.
在具有容差的模拟电路故障诊断中,似相关块的存在影响故障定位的准确性。
The influence of look-like correlative blocks on the accuracy for location of faults is serious in the fault diagnosis of analog circuits with tolerance.
这一研究将为VLSI电路器件的严格筛选、故障诊断及定位、VLSI电路的可靠性研究提供新的理论依据和检测方法。
This study offers a theoretical basis and noise detection method for VLSI circuit components selection, faults diagnosis and localization, and reliability analysis.
经实验证明该电源能满足SECM探针驱动中微定位的控制需要,具有精度高、电路简单、可靠性强的特点。
Test proves that the power supply can achieve demands of probe positioning of SECM, and power supply has high precision, simply circuit, and high reliability.
对标准电路仿真结果表明:该方法能够实现快速故障检测与定位,具有准确率高的特点。
Simulation results on benchmark circuits show that this scheme is feasible and has many powerful features, such as diagnosing and locating faults quickly and exactly.
模拟电路测试的过程主要分为两个部分:一是故障诊断,二是故障定位。
Analog circuit testing is mainly divided into two parts: one is the fault diagnosis, the other is fault location.
采样器由引水装置,采水量控制装置、定位装置、控制电路、单板机系统构成。
This water sampler consists of water diverting device, water sampling controller, the locating device, the controlling electric circuit and the single-board computer system.
在此基础上,应用网络分析与模糊数学,提出了一种故障隶属函数,据此进行容差电路的故障定位。
Furthermore, by using fuzzy mathematics and network analysis, a fault attaching function was put forward and applied to fault detection in the tolerance circuit.
实验结果表明,利用形式验证的技术来导向模拟的过程,抓住了高复杂度的多错误定位问题的特征,提高了电路错误诊断的效率。
Experimental results show that using formal techniques to direct simulation captures the main characteristics of error location and improves the effectiveness and efficiency of design error diagnosis.
将线性规划方法与电路的树分解技术结合,实现大型线性动态电路中故障的迅速定位。
Linear programming approach combines with technique in tree of decomposition to realize fault location of large linear dynamic circuits quickly.
仿真结果表明:所提方法对模拟电路的硬故障与元件参数偏移较小的软故障均适用,故障检测与定位准确率高。
The simulation results show that the proposed method can detect and locate catastrophic and parametric faults of tolerance circuits and has satisfactory diagnosis accuracy.
介绍了激光仪的定位系统,并就工作原理、电解液传感器以及接口电路进行了剖析。
It is also given that the detailed analysis of the principle, liquid angular sensor and interface circuit.
定位这个故障后,电路识别开路电线,允许断开和修复正常的电缆端。
After locating this fault, the circuit identifies the open wire and allows you to open and repair the correct cable end.
该算法能够实现对复杂电路的快速故障定位。
rd全自动钉销机用于印刷电路叠层板在印制电路板数控钻床钻孔前钻作基准定位销钉,从面保证印刷电路板数控钻床能加工出高品质的产品。
RD auto pinning machine is used to make reference positioning pin prior to drill the laminated plates of etched circuit ca rd on drill machine for etched circuit ca rd manufacture premium products.
他采用插板式结构,并将故障定位到电路板一级。
It adopts the plank type structure, positioning the breakdown to the level of circuit board.
提出在卷筒包装纸进退式光电定位系统中,采用无触点(全电子式)比较判别及控制电路,替代目前常用的触.点式同类电路。
It is suggested in this paper that a kind of contact-free circuit for comparison and control should substitute for the conventional contact one in the back-forth wrapper web position control system.
自动光学检查是利用图像处理算法进行电路板故障检测与定位的技术。
Automatic optical inspection is a technique for fault detection and location of printed circuit board using digital image processing algorithms.
针对模拟集成电路参数型故障的测试难题,提出了定位模拟集成电路参数型故障的功率谱相关分析方法。
Aiming at the problem of testing parametric fault in analog integrated circuits, an approach based on power spectrum correlation analysis for diagnosing parametric faults is presented.
应用推荐