最后,时夹层结构的形成机理作了讨论。
Finally, Formation mechanism of the lamellar structure has been discussed.
研制了铝蒙皮-硬质聚氨酯泡沫塑料夹层结构。
Then a sandwich composite of metal Al clad Pu rigid foaming plastic is fabricated.
本文研究了蜂窝夹层结构雷达天线罩损伤的修补。
In this paper the repair of damaged honeycomb sandwich radome was studied.
本发明涉及利用一种增强方法实现夹层结构的增强。
The invention relates to a method for enhancing an interlayer structure.
对碳纤维蜂窝夹层结构的动力学问题进行了深入分析。
In this paper, the dynamic analysis of the carbon fiber honeycomb sandwich structure was deeply investigated.
因此坝基沿软弱夹层结构面的抗滑稳定性为人们所关注。
Therefore the sliding stability of dam base along weak interlayer is concerned.
蜂窝夹层结构已成为雷达罩结构设计中广泛应用的重要材料。
Honeycomb sandwich has become an important material in designing radomes instruction.
本文主要是研究空腹夹层结构的保温隔热性能和施工工艺改进。
The heat preservation and insulation performance and the improvement of construction technologies of open-web sandwich structure are mainly studied in this article.
试验表明,该系统可用于复合材料结构和蜂窝夹层结构的无损检测。
It is concluded that the system can be used in nondestructive detection of composite material and honeycomb structure.
分析了复合材料面层的弹性常数、泡沫芯层的模量和夹层结构的刚度;
The elastic modulus of foam core and composite skins and the stiffness of sandwich are analyzed.
频率和损耗因子是粘弹性材料复合夹层结构的两个重要的动力特性指标。
Frequency and loss factor are two important indices of dynamic property of composite structures, in which the viscoelastic material is sandwiched between the upper layer and the lower layer.
试验证明,该系统可成功用于复合材料结构和蜂窝夹层结构的无损检测。
Experiment proved that the system was successful for the nondestructive testing of composite and honeycomb interlayer structures.
飞机复合材料零件结构分为蜂窝结构、夹心结构、空心结构、夹层结构等。
Structures of aircraft composite parts include honeycomb, inner contained part, inner empty part, and layered etc.
利用热电偶测试热补仪修补复合材料蜂窝夹层结构的面内及厚度方向的温度分布;
The in-plane and through-thickness direction temperature distribution of composite honeycomb sandwich structure repaired by hot bonder was tested with thermocouples.
玻璃钢夹层结构板对电磁波的吸收在天线罩技术和隐身技术中都是一项重要性能。
The electromagnetic wave absorption of FRP structure panel is a important property in scanner technology and hiding technology.
探索了AN/MAA共聚物泡沫塑料夹层结构复合材料的成型加工性和力学性能。
At last, we tested the processing and mechanical properties of AN/MAA copolymer foam sandwich core material.
工程中广泛使用的复合材料夹层结构受各种外力作用时,最常见的失效模式为屈曲。
The sandwich structure of composite material, which has been abroad used in the engineering, always are acted by various outside forces. The familiar invalid mode of them is buckling.
在传统泡沫夹层结构复合材料成型工艺基础上,探索了一种新型的夹层结构成型工艺。
Based on conventional manufacture methods a new manufacturing process of foam core sandwich structure composites is studied.
为了让这种材料具有储电功能,两层纤维中添加了一层薄薄的绝缘玻璃材料,做成夹层结构。
To enable this material to store electrical energy, two layers of woven fibres are made into a sandwich, separated by a thin layer of a glass-based insulating material.
预浸布均为夹层结构,两面是离型纸或者塑料膜,中间夹芯为碳纤维或玻璃纤维预浸材料。
The prepreg cloth is generally of sandwich structure with release paper or plastic film on both sides and carbon fiber or glass fiber prepreg in the center.
本文对碳纤维复合材料蜂窝夹层结构侧压强度进行了理论计算,试验值在理论计算范围内。
Theoretical calculation of edge Compressio strength of CFRP Sanduich Construction with honey core is gotten in this paper. The test value is in the range of theoretical Caculation.
探索了全厚度缝合复合材料闭孔泡沫芯夹层结构低成本制造的工艺可行性及其潜在的结构效益。
This study explored the feasibility and potential benefits provided by the addition of through-thickness stitched composite closed-cell foam sandwich structures.
预测典型缝纫泡沫芯材的面内剪切模量,进行夹层结构的面内剪切试验,试验结果与预估结果吻合较好。
The prediction result of the in plane shear modulus of a typical stitching foam-core sandwich composite was found good agree with the experimental results.
为了降低水下航行器和物体表面的声反射和声辐射强度,可以采用玻璃钢夹层结构代替单层玻璃钢结构。
To reduce the acoustic target strength of submarines and other underwater objects, a single layer of glass fibrous reinforced composites (GFRP) was replaced by a sandwich of the material.
回顾了泡沫夹层结构常用的无损检测方法:空气耦合超声方法、脉冲回波超声方法以及激光错位散斑干涉方法。
The popular non destructive test methods for the foam-cored sandwich structure are reviewed; including air coupled ultrasonic method, pulse-echo ultrasonic method and shearogragh method.
夹层结构是一种力学性能优越的承载结构,它可以充分发挥材料的作用,做到物尽其利,达到节约钢材的效果。
Sandwich structure is a bearing structure with excellent mechanics performance, which can fully display material function, ensuring materials maximum utilization, achieving the result of steel saving.
玻璃钢夹层结构的导弹包装箱比加肋玻璃钢导弹包装箱具有更高的刚度、强度和稳定性,更能满足产品设计要求。
Missile packing box of FRP sandwich construction has higher stiffness, strength and stability than ribbed FRP missile packing box, it can meet higher requirement of product design.
本文对玻璃钢蜂窝夹层结构板的弯曲试验结果(四边简支和四边固支)进行理论分析,理论值与试验值符合得很好。
Through the theoretical analysis of the flexural properties of FRP honeycomb sandwich construction, it proves that the values of theory and test agree well.
因为中国的不锈钢不是结实的不锈钢,而是夹层结构。虽然按照要求厚度制成,但是用磁铁测试法就可以一探究竟。
Because stainless steel in China is NOT solid stainless steel it is a sandwich material. which is then rolled out to the required thickness but a quick magnet test will reveal all.
因为中国的不锈钢不是结实的不锈钢,而是夹层结构。虽然按照要求厚度制成,但是用磁铁测试法就可以一探究竟。
Because stainless steel in China is NOT solid stainless steel it is a sandwich material. which is then rolled out to the required thickness but a quick magnet test will reveal all.
应用推荐