该控制器在实时性、开放性、可靠性、运算处理能力、多总线集成等方面具有优异的性能。
The field controller performs excellently in real-time property, openness, reliability, mathematical operation and multi-bus integration.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
作为现场总线的CAN，是一种开放式互联网络，用以支持多主实时、分布式控制串行通信。
CAN used as the field bus is an opening network for supporting a multiple-master real-time and distributed controlling serial communication.
提出了应用概率距离测量对多传感器信息进行一致性检验的方法，并将此方法引入到基于多惯性测量组合的总线式导弹制导控制系统中。
The method for consistency check of multisensor data by using the probability distance measuring is presented, and it used in CAN bus missile guidance and control system based on multi-IMU.
在传统的套色系统多采用RS- 485,CAN等现场总线作为主要的通信方式来实现分布式控制。
Field buses as CAN or RS-485 used to be the main communication way in the traditional distributed control intaglio printing system.
CAN总线是一种有效支持分布式控制和实时控制的、多主的异步串行通信网络。
Can bus is a kind of network of the asynchronous serial communication that can effectively support the distributed control and the Real_time and the multi-master control.
其次，为了控制多传感器视觉测量系统而构建了CAN总线控制系统。
Secondly, the CAN bus control system for controlling multi-sensor visual measuring system is carefully structured.
多播技术是控制CAN总线系统中节点同步工作的有效方法。
Multicast is an effective way to control nodes working synchronously in CAN bus system.
该系统采用CPLD实现了DSP与多通道adc的逻辑和时序控制，通过DSP的HPI与PCI总线接口设计实现了采集数据的高速传输。
The system utilizes CPLD to realize logical and timing control between DSP and multi-channel ADC. The interface between DSP's HPI and PCI bus is employed to achieve high-speed data transmission.
控制器的逻辑单元为多cpu网络体系，体系内各智能化功能模块通过CAN总线互联，实现模块间的数据交换和多cpu协同工作。
The logic elements in controller are multiple CPU network setup. Individual intelligent functional modules are interconnected by CAN bus for data exchanging and multiple CPU cooperating.
介绍一个通过USB总线来控制多通道电调谐滤光器件的系统方案。
This paper introduces a project of how to control the multi-channel electrical tunable filters via USB interface.
首先针对网络控制系统分布式的特点，特别是类似于CAN总线的多主系统，由于没有单一的时钟提供同步机制，影响调度管理的同步。
First, aiming at the distribution of NCS, specially the multi-master system such as CAN, there is no unified network clock, so the scheduling and management are affected.
在总线控制器的模块化设计方案中，这三个方面构成了总线控制器的核心模块枣存储管理单元，应用该方案可实现具有多消息自动处理功能的总线控制器。
These three aspects can be summed up into the design of the memory management unit, a core block of the bus controllers blocking design.
介绍了硫化过程微机集散控制系统中PC总线工业控制计算机与多台MCS-51单片机为核心的硫化控制仪之间的多机通信的方法与实现。
The method of data communication between PC bus industrial computer and MCS-51single chip computers in rubber vulcanization distributed control system is introduced.
现场总线是用于现场设备和中央控制室控制设备间的一种全数字、多变量、双向、多站的通信系统。
The Field Bus is a full digital, multiple variable, and bi-directional communication system with multiple stations.
利用多通道缓存串行口mcbsp实现SPI总线方式的数据采集，并采用两个DMA控制器实现了数据的实时传输和存储。
The use of multi-channel buffered serial port MCBSP is to achieve SPI bus (mode of) data collection, and the real-time data transmission and storage is achieved by the use of two DMA controllers.
CAN具有优先权和仲裁功能，多个单片机可通过CAN控制器连接到CAN总线上，形成多主机的局部控制网。
Can also functions as bus access priority and arbitration. Several single chip microcomputers can be connected to can bus through can controller to form a multi-master area controller network.
因此，利用SERCOS总线进行多轴控制将是未来发展趋势。
Therefore, the use of multi-axis control of SERCOS bus will be the future trend.
借助于差分传输的RS 4 85总线，以微控制器为核心的数据采集系统可方便地构成多机系统，可同时并行进行数据采集。
The data gather system made by micro controller may make up of a multi computer system expediently with the RS 485 bus, which can gather data synchronously in parallel.
通过CAN总线，监控主机和电机驱动节点可直接进行通信，形成分布式网络，简化了系统结构，实现多电机的分散安装和集中控制功能。
Via CAN-BUS, the monitor host computer and these nodes of driving motor can communicate with each other directly, like a distributed network. The system structure is more concise.
为了控制多视觉传感器的大型视觉测量系统，本文提出了一种基于CAN总线的分布式控制系统。
To control large visual measuring systems with multiple visual sensors, a distributing control system based on CAN bus is developed.
文章介绍的CAN总线控制系统实现了多视觉传感器的分布式网络化控制，尤其适合对实时性、可靠性和精度等要求较高的大型多传感器视觉测量系统的实时控制。
Based on CAN bus control system, distributed network control of multiple visual sensor was realized. It specially suitable to realtime control of large scale multiple sensor visual...
文章探讨了CAN总线技术，介绍一种新型的多轴运动控制技术。
This article introduces a new multi-axis-movement-system based on CAN.
文章探讨了CAN总线技术，介绍一种新型的多轴运动控制技术。
This article introduces a new multi-axis-movement-system based on CAN.
应用推荐