采用多弧离子镀技术沉积氮化钛铝超硬反应膜。
Ti, Al)N super hard films were deposited by multi arc ion plating.
采用多弧离子镀技术沉积氮化钛铝超硬反应膜。
The influences of process parameters on the surface morphology of the (Ti, Al)N super hard films are studied.
也可以单独作为磁控溅射或多弧离子镀膜机使用。
This system can be used either as multi-arc or magnetron sputtering PVD individually.
利用脉冲多弧离子镀技术在硅基底上沉积类金刚石薄膜。
DLC films were prepared on silicon by pulse-arc plasma deposition.
ZX G型离子沉积电弧蒸发电源装置，专门用于多弧离子镀膜机的电弧蒸发。
Power in ion deposition arc evaporating unit, type ZXG is specially used for the arc evaporation of multi-arc ion coating equipment.
采用多弧离子镀制备的合金涂层成分与合金阴极靶之间通常存在一定程度的偏差。
The composition generally changes from alloy cathode target to alloy coating deposited by multi arc ion plating to some extent.
多弧离子镀技术是离子镀技术的一种改进方法，它是把弧光放电作为金属蒸发源的表面涂层技术。
Multi-Arc Ion plating technology is an improved method of Ion plating and it is a surface coating technology that uses arc as the fountain of vaporizing.
介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Black tin coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
为了对多弧旁路gmaw (DB - GMAW)焊接过程中的熔滴过渡特征信息深入研究提供条件，对该种焊接方法下熔滴过渡图像颈缩部分边缘提取算法进行了研究。
In order to study metal transfer characteristics during dual bypass GMAW (DB-GMAW) process, many kinds of edge extraction algorithms were used to process the necking images of DB-GMAW metal transfer.
针对自行开发的基于多cpu数字化埋弧自动焊系统进行了多机通信系统的设计，具体讨论了多机通信的实现。
A multiprocessor communication system is designed in this paper based on the multi-CPU digital submerged arc welding system, and the realization of communication is discussed in detail.
而细分作为一个优秀的几何造型工具，在弧长约束方面的研究也未多涉及。
However, subdivision as an excellent tool was not used in fields of geometric restriction.
高压少油断路器中，灭弧室普遍采用多断口串联式结构。
In HV oil-minimum breaker, the arc extinguish Chambers usually adopt serial-type construction of multi-break.
用这个方法预报内容多，省去了每圈求卫星可见弧段的计算。
Using this method, we can obtain more information, and calculating of the visibility of satellites in every pass has been omitted.
设计了一台多阴极的金属蒸气真空弧离子源，它有18个阴极，任一阴极都能在真空状态下被迅速接入电路工作。
A multi-cathode metal vapor vacuum arc (WEVVA) ion source has been designed. It contains an array of 18 cathodes, any of which can be switched into operation rapidly while under vacuum.
所述换热面为拱形或向中间上方倾斜的换热面，由多根弧 形或向中间上方倾斜的换热管组成。
The heat exchanging surface is arched or is inclined upward at the middle part and consists of a plurality of heat exchanging pipes which are arc-shaped or inclined upward at the middle parts.
然后主要从双丝或多丝电弧焊工艺和双焊炬组合焊接工艺两个大的方面着重介绍了纵列式熔化极气体保护焊、等离子弧-熔化极气体保护焊和双电极熔化极气体保护焊等高速弧焊工艺。
Then, high-speed arc welding processes are introduced, such as tandem GMAW, PAW-GMAW and DE-GMAW, based on two categories:twin or more wires arc welding process and two-torch combined welding process.
他在中圈弧附近看着麦克菲登打进点球。这位法国国脚随后在终场哨声吹响后哀伤地坐在球场上，阿森纳全队都受到了爱德华多让人恐怖受伤的影响。
The France international then sat distressed on the pitch at the final whistle, with the Arsenal side having been affected by the horrific injury suffered by Eduardo.
首次采用线图法分析了其啮合过程，建立了双圆弧齿廓弧齿锥齿轮重合度、多点接触系数和多对齿接触系数计算方法；
The meshing process is analyzed using line graph method firstly, calculation methods of the contact ration, multi-point contact coefficient and multi-pair contact coefficient are established;
首次采用线图法分析了其啮合过程，建立了双圆弧齿廓弧齿锥齿轮重合度、多点接触系数和多对齿接触系数计算方法；
The meshing process is analyzed using line graph method firstly, calculation methods of the contact ration, multi-point contact coefficient and multi-pair contact coefficient are established;
应用推荐