基于混合物理论的两相多孔介质模型能准确描述关节软骨的力学行为。
Biphasic porous medium model based on mixture theory can be used to accurately depict the mechanical behavior of articular cartilage.
在模拟气流分布板时，利用计算流体动力学软件中的多孔介质模型是一种有效的方法。
Used porous medium porous Jump Boundary Conditions of hydrodynamics in simulating the gas distribution screen.
相对于等效多孔介质模型，双重介质模型模拟的水位下降速度更小，达到稳定的时间更长。
Compared with conventional equivalent porous medium model, the water level changes simulated by this double medium flow model are slower and the time of being stable is longer.
以往对换热器壳程流场和温度场的数值模拟都是建立在多孔介质模型基础上进行的，存在许多问题。
Generally the numerical stimulation on flow field and temperature field of shell distance is based on porous medium model.
气体通过挡风抑尘墙的流动是典型的多孔介质-纯流体耦合流动，多孔介质模型能够良好的反映其工作特性。
The wind pass the wind-proof and suppressing wall is a typical porous media-fluid coupled flow, the porous medium model can show its working characters well.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
本文分析了数值模拟石蜡熔化过程可能遇到的困难，提出利用FLUENT求解相变过程换热，采用多孔介质模型。
This paper analyzed the difficult of numerically simulation in melting process of paraffin. It was advanced that we could deal with it by FLUENT software and adopting porous medium model.
结果表明，不采用多孔介质模型计算的气泡的逃逸速度比采用多孔介质模型大，且随着底吹流量的增加，偏差加大。
The results show that when the porous media model is not used, the calculated escape velocity of bubbles is larger, and the difference becomes larger with increasing the gas flow rate.
多孔介质模型方法可以用于多孔介质中流体流动问题的数值模拟，并且非常适于进行多孔介质纯流体耦合流动区域的数值模拟。
The porous media model method can be used to simulate the fluid flow in porous materials, especially for the flow in porous fluid coupled areas.
关节软骨为一由骨胶原和蛋白聚糖固体相和孔隙流体相组成的多孔材料，其可以用基于混合物理论的两相多孔介质模型准确描述。
Articular cartilage, which is composed with a solid phase of collagen fibers and proteoglycan and a pore fluid phase, can be depicted with two-phase porous medium model based on mixture theory.
黏弹性流体饱和多孔介质模型比采用单相介质或者弹性饱和孔隙介质更接近实际的土层介质，来该模型来研究土层介质的动力响应更为合理。
The fluid saturated porous viscoelastic media is closer to actual stratum than Biot media and single-phase media, and the researches on its dynamic response will be more reliable.
针对饱和土固结问题，利用可变形多孔介质中流体渗流的流固耦合有限元数值模型，对该问题进行了数值模拟。
The soil consolidation can be simulated by using a finite element numerical model of fluid-solid coupling of fluid seepage in a deformable porous medium.
根据体积平均理论，建立多孔介质中融化相变过程自然对流模型。
Based on volume averaging theory, natural convection model for melting phase change in porous media was established.
采用毛玻璃模型、填充砂管和人造岩心封堵实验，研究了多孔介质的表面润湿性对交联聚合物溶液（LPS）封堵性能的影响。
The effect of surface wettability of porous media on the plugging properties of LPS was studied through the ground glass model, quartz sand-packed tube and artificial core plugging experiments.
本文应用此模型对两个主要工业应用领域的多孔介质多相流进行了数值模拟和结果分析。
In this paper, the present model is adopted to numerical simulate the transport process in porous media for two major industrial areas.
建立了一个基于临界毛管压力并能够描述多孔介质中泡沫流动规律的等效数学模型。
An equivalent numerical simulation model that can describe the foam flowing rules in porous medium is constructed based on ultimate capillary pressure.
孔隙网络模型广泛地用于同多孔介质有关的微观模拟中。
Pore scale network model has been widely used in the microscopic modeling associated with porous media.
研究了一类非零键渗透率满足均匀分布的随机多孔介质逾渗模型。
A percolation model of random porous media, with its nonzero bonds obeying the uniform distribution, is researched in this article.
孔隙网络模型广泛应用于多孔介质的微观模拟中，已经可以较好地实现对渗流参数的定量预测，并用来描述微观渗流过程。
Pore network model is widely applied in microscopic simulation of porous media. Flow parameter is quantitatively predicted and microscopic flow process is described.
根据多孔介质理论，采用非局域热平衡方法，建立了干熄炉内传热的一维数学模型。
According to porous medium theory, non regional heat balance method is adopted, heat transfer one dimensional mathematical model in CDQ chamber is established.
多孔介质中的流体运动和它产生的渗流模型，都是分形的研究对象。
Porous Media and its fluid movement arising from the seepage model is fractal of the study.
第三方面建立了饱和多孔介质单相流体固流耦合蠕变的数学模型。
Third, the mathematical model describing the nonlinear creep phenomena of solid-fluid coupling of one-phase fluids in saturated porous medium is established.
根据流体力学和多孔介质渗流力学的基本原理，建立实验模型，结合一些数学方法，推导出煤层注水时间的解析解。
According to the basic principle of hydrodynamics and the seepage mechanics with pores, the experimental model is established and the analytic solution about the topping up time is deduced.
采用单区燃烧模型模拟多孔介质（PM）发动机的压缩、燃烧和膨胀过程。
Porous medium(PM) was mounted into combustion chamber as the heat recuperator, and the working process of an engine is simulated by using a single-zone combustion model.
根据多孔介质干燥过程中的传热传质理论，结合纸机工作特点，建立了纸页的干燥过程物理模型和数学模型。
A mathematic model based on heat and mass transfer in porous media was established for the simulation of paper drying in dryer section of paper machine.
根据多孔介质容积平均方法，建立了被水饱和的一维多孔介质中注入蒸气后的流动和传热的物理模型和数学模型。
With volumetric average method, a physical model is presented in this paper for one-dimensional porous media initially saturated with water when receiving a sudden inflow of steam.
一维模型包括气体输运、多孔介质固体的辐射、导热和气固两相间的对流换热。
The one-dimensional model takes into account gas-phase transport, radiation, interphase heat exchange, and solid conduction.
以热力学第一定律为基础，引入多孔介质换热模型，建立了多孔介质发动机的能量方程。
An energy equation that incorporates a heat transfer model of porous medium is developed based on the first thermodynamic law.
砂槽模型是将天然的多孔介质区域按比例缩小的模型。
The sand box model is a reduced scale representation of the natural porous medium domain.
砂槽模型是将天然的多孔介质区域按比例缩小的模型。
The sand box model is a reduced scale representation of the natural porous medium domain.
应用推荐