党的十六大深刻分析国内外形势的变化和特点，作出了深化文化体制改革的战略部署。
The 16th National Congress of the CPC profoundly analyzed the changes and features of the situations in China and abroad and made the strategic decision to deepen the reform of cultural system.
在选定模型箱结构的外形与构造时，借助有限元分析论证了可不与模型土发生共振的箱体构造；
It is proved by FEM analysis that the proposed shape and structure of the test box can avoid resonance with the model soil.
为此利用斜拉索外形与索力的协调方程，提出了一种适合斜拉索非线性分析的状态修正法，并由算例证明了此法的正确性、实用。
By using the harmonic equation of the tension and shape of stay cable, a state revision method is presented for the nonlinear analysis of stay cable in this paper.
全文介绍了计算流体力学分析、外形参数化和优化算法三方面的工作。
The work presented in this thesis comprises of CFD analysis, shape parameterization and optimization algorithm.
分析和讨论了高升力系统外形无黏和黏性流动的物理特征，表明了流动现象的复杂性和求解的艰难性。
The inviscid and viscous flow physics around a high lift configuration and the complexity of its flow phenomena and the difficulty of its description are analyzed and discussed.
提出将原木表面形状的三维几何数据的检测、原木外形轮廓三维模拟再现以及原木形状参数分析与管理操作过程交由计算机控制完成。
It puts forward that measuring the three-dimensional geometric data of log surface shape, reappearing log shape and analyzing and managing shape parameters of log is all controlled by computer.
为了提高该无人机的隐身性能，本文还作了无人机外形的改进设计，并进一步作气动和隐身性能分析。
For improving the stealth performance, the configuration of the tailless UAV was ameliorated, and then the aerodynamics and stealth performance was analyzed.
文章研究、分析了紫外激光在挠性印制电路板外形加工方面的优势与特性。
This thesis studies and analyzes the advantages and characteristics of ultra-violate laser used in shape processing of flexible printed circuit board.
本文通过对离心铸管机机液倾翻机构的分析，推导了等速板的型线方程，计算拟合了等速板的外形。
In this article, the dumping machine for centrifugal casting iron pipes was analyzed, the profile equation of constant velocity board was deduced, and the shape of the board was thus computed out.
本文深入地研究和分析了电容传感器探头形状与外轮廓尺寸对检测精度的影响以及被检测件外形给传感器探头带来的误差。
This article makes deep research and analysis to effect of capacitance transmitter probe shape and overall dimen 'sions on sensing accuracy as well as errors of measured components on the probe.
然而，经分析还发现他的红细胞偏小、色浅，而且有的外形异常。
The analysis also noted however that his red blood cells were small lacking in color and in some cases unusually shaped.
方法对3例无心畸形胎儿的临床表现、外形和内脏结构以及胎盘形态进行观察与分析。
Methods 3 cases of acardia were observed with analyses of clinical features, their externalities and the structures of viscera and placentas.
提出了一种研究不同栅格及单元外形并有介质加载的双层频率选择表面（FSS）电性能的理论分析方法。
A theoretical approach analyzing electrical performance for dielectric loaded du al-layer Frequency Selective Surface (FSS) configuration with dissimilar lattice and element geometries is proposed.
通过对电动机结构型式与热负荷、有效材料峰值功率密度的分析，确定了电动机的外形尺寸。
The influence of motor type to the thermal load and the effective material peak-value power density is analyzed, and the dimensions of the motor are selected.
通过典型外形的计算、试验结果分析，提出了地效区内空气动力的一些规律。
Some aerodynamic laws of aircraft flying near sea surface are given through the analysis of results calculated and tested on a typical configuration.
最近出土的化石使鲸的祖先可追溯到一种有蹄外形像狗的植食动物，而且基因分析证实了现存动物中河马是鲸的近亲。
Recently unearthed fossils trace whales to a doglike predecessor of hoofed plant-eaters, and genetic analysis has identified hippos as whales' closest living relatives.
本文对功能进行分析后，提出了系统控制方案，分析并实现了控制部分，并且设计了系统的外形结构。
After the function is analyzed, the system control scheme is put forward. The control part was analyzed and realized. And the outline structure of the system is designed.
由于毛坯外形对零件的成形质量影响很大，本文还分析了毛坯圆角对零件成形的影响，最终确定了合理的毛坯形状和尺寸。
Because the blank shape affect the quality of piece forming greatly, here the influence of blank fillet on piece forming is also analyzed, the suitable blank shape and dimension are finally gained.
分析了裤衩型钢煤斗外形的几何特点，建立了裤衩型钢煤斗漏斗表面的数学模型，分析了曲面展开的算法。
This paper analyzes the geometric features of the trousers type steel scuttle, sets up the mathematics model of the funnel surface of this scuttle.
相比较于其它数值计算方法，它更擅长于分析具有复杂外形和介质结构物体的电磁问题。
Compared with other numerical methods, FDTD is superior in dealing with the kind of problems where involved objects have complex shape or material construction.
采用单学科优化和多学科优化相结合的方法对常规气动布局进行了气动外形优化，并比较分析了单、多学科的优化结果，得出重要结论。
The aerodynamic figuration of the normal MAV configuration was optimized applying the method of the combinative of single and multidisciplinary design optimization.
采用数值模拟求解NS方程方法计算与分析了绕大钝头短体外形的跨音速大迎角时的湍流流动。
The transonic turbulent flow around a blunt nosed and short body at large angle of attack was calculated and analysed by using numerical simulation method to solve the full N S equations.
本文主要介绍了容栅式数显焊接棱角度错边量检测仪尺身定栅槽、基尺外形的成型磨削加工工艺以及砂轮修整工艺，此外，对成型磨削过程中的计算机模拟进行了分析。
This paper introduces the shape grinding process of the decides grid trough and the rule's contour and the process of grinding wheel truing, analyzes the process simulation by computer.
因此，本文通过对以色列所面临的国内外形势进行分析，探讨沙龙制定出这一计划的原因。
So the paper will discuss the causes of Sharon's Unilateral Disengagement Plan after analyzing the domestic and international pressure faced by Israel.
给出了一种分析有介质加载的不同栅格外形双层频率选择表面电磁特性的数值模拟方法。
A numerical simulation approach analyzing electromagnetic characteristics for dielectric-loaded double-layer frequency selective surfaces (FSS) with dissimilar lattice geometries is presented.
通过对铝合金扁铸锭外形尺寸实测数据的分析，提出了一种半连续铸造结晶器内腔形状的优化设计方案。
An optimization design of the crystallizer internal shape for semi-continuous casting was proposed according to the outside dimension data of the flat ingots.
然后应用中心复合试验设计法确定了七十种外形布局，并计算和分析了各外形参数变化对联结翼飞机稳定性的影响。
According to the computing results, the relations between the he stability characteristics and the configuration parameters of joined-wing airplanes were obtained.
计算机软件对外形数据进行分析计算，并显示结果。
The software on the portable computer will calculate and analyze the profile data and display the results.
对结构内部应力和结构形态(外形)的控制是结构分析和设计中非常重要的两个方面。
Two aspects, controlling over the internal stress distribution of structures and structures' shape, are the main criterion for evaluating the efficiency of form finding methods.
对结构内部应力和结构形态(外形)的控制是结构分析和设计中非常重要的两个方面。
Two aspects, controlling over the internal stress distribution of structures and structures' shape, are the main criterion for evaluating the efficiency of form finding methods.
应用推荐