基于此开放式数控平台，进行了复杂曲面加工的研究。
Research of complex curved surface machined on the platform has been done.
以微分几何学和矢量分析为工具，提出了复杂曲面加工路径规划的新方法。
Using differential geometry and vector analysis, a new tool-path generation method for freeform surface machining is presented.
五轴数控加工以其灵活、高精度、高效率等特点在复杂曲面加工中得到了越来越广泛的使用。
Five-axis NC machine tools are widely used in sculptured surface machining for its higher performance than 3-axis machine tools.
所用的计算方法高效精确，为复杂曲面加工过程的动态模拟和加工误差的控制奠定了数学基础。
The method is efficient and precise, and lays a mathematic foundation for NC verification and machining error control in 5-axis sculptured surface manufacturing.
根据啮合基本定理提出的复杂曲面加工表面几何仿真算法是对几何仿真新的探索，具有较强的实际意义。
Algorithm of geometry simulation in machining complex curve surface depending on engagement theory is the new exploration for geometry simulation, it has better practical meaning.
在复杂曲面数控加工中，刀位轨迹生成算法的优劣在一定程度上影响最终加工表面质量和加工效率。
Tool path generation is important for complex parts nc machining, and the methodology of tool path generation affects the efficiency and quality of parts machining.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
本文介绍了一个复杂曲面数控加工轨迹的生成与显示软件。
This paper introduces a software for producing and displaying the NC working locus of workpiece with complex surfaces.
装配式成形铣刀由于其可调性和可换性等优点，在加工复杂曲面中得到广泛应用。
The assembly type formed milling cutter is widely applied in manufacturing complicated curve surface because of its advantages of adjustability and changeability.
将XB4450仿型铣床改造为四轴三联动的数控铣床，可以加工复杂的曲线、曲面。
The XB4450 imitating milling machine transformation is four axes three linkages numerical control milling machines. It may process the complex curve, the curved surface.
本文基于UG软件提出了一种复杂曲面覆盖件模具的分区加工方法，并以汽车前盖内板的凸模加工为例，详细介绍了基于该法的模具CAM过程。
The method of divided-area machining for complicated surface panel die based on UG software has been presented with introduction to such CAM process in details of production of an automotive panel.
介绍了复杂曲面模具测量、造型与加工一体化系统(3ms)的结构和主模块功能，重点分析了CAM模块的设计思想。
The structure and the main function modules of the 3ms (Measurement Modeling Machining System) were introduced with stress on the CAM portion in this paper.
实验与仿真结果表明，模块化固持平台能够满足复杂曲面蜂窝铣削加工的固持要求。
Results of the simulation and experiments show that the modularized fixation system can fix the paper honeycomb parts with complex surface during machining process.
本文的出发点是通过选用适合方法对复杂自由曲面进行造型，满足曲面数控加工的需要。
The aim of this dissertation is to perform complex free form surface modeling by choosing appropriate methods, then it can satisfy the requirements of numerical control machining.
结果表明将理论分析与仿真技术相结合，是复杂曲面设计和数控加工刀位验证的一种有效途径。
The results indicate that it's an effective method for complicate surface design and NC tool position verification to combine theory analysis and simulation technology.
该冗余驱动并联机床运动平稳，可实现复杂曲面的加工。
The PMT with redundant actuation achieved smooth moving and the curved surface machining.
介绍了以反求工程为技术支撑的复杂曲面模具数控加工的基本原理和实现过程关键技术—样件表面数字化技术和曲面重构技术。
The key technology about surface digitizing and reconstruction in the mold tooling digitized manufacturing based on the reverse engineering as well as the basic theory is analyzed.
针对复杂多曲面3轴粗加工方法的刀轨自动生成问题，提出一种刀具轨迹的优化算法。
According with the tool path generation in the 3 axis rough milling of complex multi surfaces, the article presents an algorithm on the optimization of tool path.
在复杂曲面数控加工过程中，由于刀具的插补运动轨迹与理论轨迹之间必然存在一定的误差，因而导致实际加工曲面与理论曲面之间存在误差。
In the process of NC machining complex curve, there is error between interpolation tool path and theoretic tool path, which lead to the error between actual curve and theoretic curve.
通过对仿真结果的分析，总结出典型运动形式下复杂直纹曲面电火花线切割加工系统加工空间直纹曲面的一般规律。
After the simulating results are analyzed, some general rules of machining complex ruled surface by means of WEDM system under typical motion types are figured out.
为了拓宽复杂直纹曲面电火花线切割加工的工艺范围并提高其加工效率，本文进行了直纹曲面线切割计算机图形仿真技术的研究工作。
The work of computer simulation onmachining ruled surface by means of wire cutting is done in this thesis to widen the applying range of WEDM process in machining complex ruled surface.
针对复杂曲面类零件加工余量分析过程中的测量数据匹配问题，提出通过初始匹配和精确匹配来实现曲面测量数据的最佳匹配。
An optimization method was presented for best-fitting of measurement point cloud to the complex surfaces, which consists of rough matching and accurate matching.
提出将自由曲面蜕变为直纹面，将复杂自由曲面粗加工问题转化为简单的直纹面粗加工问题。
The problems that the free surface is changed to the ruled surface and complex free surface rough machining is changed to simple ruled surface rough machining are put forward.
旋风式铣削模型是基于复杂自由曲面的5轴数控加工而提出来的一种新的铣削技术。
Whirlwind milling model is a new milling technique proposed in this paper based on 5-axis CNC horizontal bed-type milling machines.
该型数控铣床与传统铣床相比，能够完成复杂曲面工件的铣削加工，增加了铣床的功能。
Compared with the traditional ones, the new machine could process the work pieces with more complex surfaces and increase functions of milling machine.
该型数控铣床与传统铣床相比，能够完成复杂曲面工件的铣削加工，增加了铣床的功能。
Compared with the traditional ones, the new machine could process the work pieces with more complex surfaces and increase functions of milling machine.
应用推荐