本文介绍了稀土铝基轴承合金的研制，合金包铝及复合轧制工艺。
The aluminium base bearing alloy with rare earths is studied in this paper, which recommends making alloy, coating aluminium and rolling technology of bimetal.
通过对金属复合轧制的变形分析，导出了多层金属复合轧制的包覆板坯厚度计算公式。
By the analysis of the deformation of metallic composite rolled products, a formula for calculating the thickness of covering slab for multilayer metallic composite rolling is derived.
本发明铜合金镍网磁性复合材料是由上下表面层和中间层的原料带材复合轧制成一体的带材结构。
The invention relates to a copper alloy nickel-net magnetic composite, which is the integral belt structure rolled by stock belts in top and bottom surface layers and middle layer.
同时对不同的径向和轴向进给速度对径轴双向复合轧制过程中轧制力，直径增长速率及温度分布的影响进行了系统分析，并进行了相应的实验验证。
Influences of different radial and axial feeding speed on the radial and axial rolling force, growth rate of diameter and temperature have been systematically analyzed and proved by trials.
研究表明，增加变形程度和选择合适的轧制温度能提高复合板的界面初结合强度。
The results indicated that increasing the deformation and a proper rolling temperature may improve obviously the bonding strength.
结果表明，轧制变形程度和铝层加热温度都是影响复合板初结合强度的主要因素。
The results prove that the initial bonding strength mostly depends on total reduction and heating temperature of al.
理论分析和实验研究表明，用型孔轧制法制备钛铜复合棒的工艺是可行的，并且也是较好的一种复合方法。
Theory analysis indicate with experiment research, prepare against with pass rolling to prepare titanium copper cladding bar excellent craft feasible, and a kind of better complex methods.
微观组织观察表明，在锻造或高温轧制状态下获得了以低碳马氏体为主，含少量贝氏体和残余奥氏体的复合组织。
Observations showed that the micro-structure of the steel after forging or high temperature rolling was composed of low-carbon martensite, a little part of bainite and residual austenite.
研究得到的数据对大规模轧制复合生产钛铜复合棒具有一定的指导意义。
Studying data got has certain directive significance excellently in rolling and compounding to produce the titanium copper cladding bar on a large scale.
研究了铜—铝轧制复合的最佳工艺，并通过轧前组元金属状态、压下率和温度对复合强度的影响，了解了铜—铝复合机理．。
The best process of Cu-Al rolling compound is analysed- The Cuotl compound mechanisms are understood by the effect of the metal state, the reduced ratio and the temperature.
本文以爆炸复合板的轧制为例，综述了金属爆炸复合材料压力加工的特点及其工艺、组织、性能和应用。
The rolling of explosion bonded composite material is cited as an example to review the fabricating behaviors and processes, the structure, properties and applications of the material.
本发明提供了一种板带材轧制用变凸度工作辊，其辊形曲线采用复合函数。
The invention provides a variable convexity working roll for rolling plates, sheets and strips, and a roll shape curve thereof adopts a composite function.
复合材料轧制板材峰时效的强度和延伸率与挤压板材峰时效状态相比有一定程度的提高。
The peak ageing strength and elongation value of the rolled composite were higher than those of the extruded composite.
通过实验研究了不锈钢和铝双金属的固相轧制复合。
In this paper, the investigation has been carried out on the solid bonding of stainless steel with aluminum by rolling experiment.
介绍了山东石横特钢集团有限公司棒材车间在小规格热轧带肋钢筋切分轧制中高速钢复合轧辊的应用情况，实践证明，高速钢轧辊可有效提高作业率及产品质量。
In this paper, the application of high speed steel compound roll in splitting rolling of small gauge hot rolled ribbed bars at bar Plant of Shandong Shiheng Special steel Group co.
并应用光电复合法和精度保证技术解决某钢厂轧机轧制力精度的校准问题。
We solve the problems resulting from ensuring the precision of rolling force in the rolling-mill in a certain steel company with photoelectric method and the precision guaranteeing technic.
针对目前不锈钢复合板各生产方法存在的诸多不足，研制开发了钎焊轧制法。
Aiming at the fairly disadvantages in different realizations of stainless-clad steel plate at present, a new production method-brazing and soldering rolled method is developed.
在研究轧制工艺参数对轧制复合过程的影响时，重点探讨了轧制温度以及变形量的影响。
While studying the rolling influence of the course to rolling compounding of craft parameter, have probed into the rolling temperature and influence of deformation amount especially.
研究表明，同种金属复合时，随轧制温度升高．临界变形明显降低；
The study results indicate that the threshold deformation at which materials of the same metal is bonding to each other decreases with increasing rolling temperature.
通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。
The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.
模拟结果证实了应用显式动力学弹塑性有限元法模拟双金属复合板轧制的可行性，且计算所得轧制力与实验结果吻合较好。
The specific rolling force distribution was obtained by simulation and the calculated results of rolling force are in good agreement with the measured ones.
这种金属复合板是采用特殊的轧制复合工艺加工而成的。
The clad metal sheet has been produced by a proprietary roll bonding process.
讨论镍—不锈钢爆炸+轧制复合板在不同工艺下退火后的成分、组织和性能，在本试验的条件下，该复合板都有良好的结果。
The present paper discusses chemical compositions, structures and properties of explosion welded and rolled Ni stainless steel clad plate after annealing treatment under different process conditions.
获得了轧制复合过程的应力-应变场和温度场变化，对热轧过程有了更清晰的认识；
The stress and strain field and the temperature field, which was helpful to understand the hot rolling process, were obtained during the rolling process.
各种不同直径的复合丝轧制成的超导带，都有一临界电流最高的厚度范围。
To the tapes made from composit silk with different diameter, there is a thickness range in which Jc is higher.
指出轧制复合法和爆炸复合法的生产技术较为成熟，是目前铜铝复合板常用的生产方法。
The composite method and explosive compound rolling production are more mature technology, which are commonly used in copper and aluminum composite panel production.
探讨了爆炸焊接和爆炸复合材料轧制的机理。叙述了这种复合材料的用途。
The mechanism of explosive welding and rolling of the composite slab is described.
本发明提供一种改善复合板内外层厚度分布的轧制方法，属于金属塑性加工成型技术领域。
The invention provides a rolling method for improving the outer layer thickness distribution of a composite plate, which belongs to the technical field of metal plastic processing and molding.
结合控制气氛轧制复合工艺，研究了轧制张力和坯料加热温度对轧制复合临界变形程度和复合后厚比的影响规律。
The effect of temperature and tensile force on the threshold deformation and the thickness ratio after bond was mainly studied under the condition of control atmosphere rolling process.
结合控制气氛轧制复合工艺，研究了轧制张力和坯料加热温度对轧制复合临界变形程度和复合后厚比的影响规律。
The effect of temperature and tensile force on the threshold deformation and the thickness ratio after bond was mainly studied under the condition of control atmosphere rolling process.
应用推荐