希望对铜基复合材料工艺改善和研制新型铜基复合材料有所帮助。
It is helpful to improve techniques or develop new preparation methods of Cu-based composite.
本文简单介绍了国内外新型酚醛树脂及其复合材料工艺的进展情况。
New type phenol resin and its process development are briefly introduced in this paper.
分析了过程稳定界限与设计值关系的相互关系；SPC在复合材料工艺过程中的应用研究。
Meanwhile, the relations between the limitation of process stability and designing values are analyzed and application of SPC on composite process are researched.
采用正交回归设计的试验方法优化复合材料工艺，所制得的复合材料性能优异，纤维与基体界面粘接良好。
Composites process is optimized by orthogonal regression design method. The result shows that this composites is of good property and fiber binds well with resin matrix surface.
这些为多向纤维缠绕复合材料制品的制造工艺提供了理论上的指导。
These provide a theoretical basis for the manufacturing process of the multidirectional filament wound composite products.
通过一系列的实验比较和分析研究，客观地评价了三维编织工艺参数对复合材料拉伸性能的影响。
In this paper, based on a series of experimental comparison and analysis, the influence of three dimensional braiding technology parameters on the tensile properties of composites is evaluated.
功能性磷化工艺主要应用于冷加工业、机械工业、复合材料加工业、涂料工业等。
Functional phosphating process is applicable to cold working industry, machinery finish industry, composite material industry, coating industry and so on.
探讨了SBS、滑石粉用量，三种偶联剂处理滑石粉及两种不同加工工艺对复合材料性能的影响。
The influences of the contents of SBS and talcum, talcum powder treated by three kinds of coupling agent, and two processing methods on the properties of composite were investigated.
在复合材料中由于制备工艺或后期损伤导致的弱结合界面，界面破坏为主要的复合材料破坏机制。
Interface breakage will be the main fracture mechanism if the interface bonding is weak because of the damage during the composites preparation.
研究了不同增强颗粒、制备工艺的不同环节对铜基复合材料导电性能的影响。
The influences of different particles and different link of fabricating technology on electrical conductivity of copper - matrix composites were studied.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
研究了液相烧结钢结硬质合金-铁双层复合材料的生产工艺。
The liquid phase sintering process of steel based carbide - iron bimetal composite was researched.
本文介绍了改性双马来酰亚胺树脂的分子结构与性能，及复合材料的模压成型工艺。
This text introduced molecular structure and performance of modified BMI resin, and mould pressing craft of the composite material.
为了满足风力机复合材料叶片生产的关键工艺要求，采用新型的复合材料叶片模具作为核心工艺装备成为必备条件。
In order to meet the technical requirements for the blade production, the main equipments which are made with advanced composite materials should be the indispensible premise.
利用固化反应动力学模型对复合材料成型工艺的固化工艺进行了模拟计算。
The simulating calculation of composite curing process was carried out by means of cure kinetic model.
利用正交设计实验法，确定了制备该复合材料的最佳工艺。
The optimal process of manufacturing composites was defined via experimental methods of orthogonal arrays design.
树脂传递模塑法(rtm)是一种低成本、效益好的复合材料成型工艺。
Resin Transfer Moulding (RTM) is an established process for manufacturing polymer matrix composites with low cost and high benefit.
对复合材料产品的工艺设计具有一定指导意义。
It also has guiding significance in the technological design of the composite materials.
树脂传递模塑被认为是一种有前途的大量生产高性能复合材料的工艺。
Resin transfer molding is considered a promising manufacturing process for high performance composite materials.
树脂传递模塑被认为是一种有前途的大量生产高性能复合材料的工艺。
Resin transfer molding (RTM) is considered a promising manufacturing process for high performance composite materials.
通过对复合材料叶片模具的制作工艺研究和技术创新，使得新型模具完全满足了大型风机复合材料叶片生产的所有工艺需求。
With the research and innovation of the process, the modern mould can meet requirement of manufacturing composite materials blade of huge wind turbine.
介绍了利用旋转模塑方法成型复合材料制品工艺。
It introduced the processing technology of the product from composite materials by means of rotational molding method.
从而确定了制备玻璃基废弃物复合材料的较佳工艺条件。
So the advanced technical conditions in manufacturing glass-based waste composite were gained.
“买得起的复合材料”计划的实施将使复合材料得到普遍使用，而材料与工艺是实施该计划的基础和关键。
Implementation of "Affordable composite" plan will greatly increase usage of composite. Material and process are the base and key for implementing this plan.
树脂膜熔渗工艺(RFI)是一种新型的复合材料成型工艺。
Resin film infusion (RFI) is a new technique for the manufacture of composite structures.
本文介绍了树脂基复合材料的性能特点、组成和分类，重点介绍了树脂基复合材料的成型工艺及其在汽车上的应用。
This paper introduces the performance, composition and classification, mainly introduced the mold process of resin matrix composite and the application in automobile.
本文介绍了树脂基复合材料的性能特点、组成和分类，重点介绍了树脂基复合材料的成型工艺及其在汽车上的应用。
This paper introduces the performance, composition and classification, mainly introduced the mold process of resin matrix composite and the application in automobile.
应用推荐