乍看起来，自然会认为共振态不过是较稳定粒子的复合态。
At first sight it is natural to regard resonances as merely composite states of more stable part particles.
从渗流流态讲，侧钻井是水平井渗流的一种近似，因此不能沿用裸眼井复合油藏试井模型。
From the point of view of seepage flow, sidetracked well is similar to horizontal well, thus, the open-hole well composite reservoir test model can not be adopted.
因此由本试验可知，螺旋升流反应器既可形成局部为完全混合流，整体又趋于推流的复合推流流态，又可提高氧转移效率，具有较强的节能效果。
The result of the research shows, partial perfect mixing fluid and holistic complex plug fluid state can be formed in SUFR, and higher Oxygen-transfer efficiency causes energy saving.
结论溶剂分散法和湿态研磨法均适用于制备壳聚糖磷脂复合物。
Conclusion Both methods used are suitable to prepare chitosan-phospholipid complex.
通观高频度词语的变化，就可以把握政策变动的大体情况。了解复合词语的使用状况就可以理解更为具体的变化的实态。
Change of words of high-frequency reflects the change of polices, and usage of compound words can reflect more specific changes.
而后由矩阵元方程分离出通常两个复合玻色粒子满足的等时方程，它是一个三维方程，因此无鬼态。
Then from the equations of the matrix elements the equation of the usual two composite boson is separated, as it is a three-dimensional equation, the ghost states disappear.
综述了近年来干态聚合物电解质的研究进展，包括：（1）以改性聚氧化乙烯-锂盐复合体系为代表的耦合体系；
There are three kinds of solvent-free polymer electrolytes: (1) coupled systems represented by the complex of modified polyethylene oxide and lithium salt;
通过对复合体系激发态吸收谱、荧光光谱的测试以及光限幅和Z -扫描实验探索了酞菁复合干凝胶的光限幅机理。
The optical limiting mechanics of MPc in composites was studied by excited absorption spectra, fluorescence spectra, optical limiting and Z-scan experiment.
介绍了汽车变速箱中的一个关键零部件—双联主动齿轮的冷态镦粗、挤压及冲孔的复合成型工艺。
This paper introduces cold heading and combined forming process of extrusion and punching for gear cluster, a key part of automotive gearbox.
实验结果表明，热处理能改善铸态下制得的铝硅基复合材料显微组织形态。
The results have shown that heat treatment can improve the microstructure of the Al-Si base composite manufactured under case condition.
讨论了复合速率系数随电子温度，原子序数，复合类型以及双激发态中俘获电子的主量子数的变化关系。
The variation of state to state DR rate coefficients with the electronic temperature, DR type, and the principal quantum number of intermediate resonance states is discussed.
实验结果表明：随着外部盐溶液浓度的增大及盐离子的价态的升高，复合材料的吸液率下降；
The water absorbency was descended with the ascending of the concentration of the external ion solution and the valence of the ion.
运用XPS分析方法研究一系列复合氧化物催化剂中毒前后硫在其表面的各种形态及催化剂活性组分中毒前后的组成、价态、化学机理及其变化。
By using XPS, before and after the intoxication of mixed oxide catalysts, the various appearance and the composition. valence and chemical mechanism of the active component of catalysts were studied.
用非平衡态热力学涨落理论对纳米复合材料的固化作了理论预估，与实验固化曲线能很好地吻合。
The non-equilibrium thermodynamic fluctuation theory was used to predict the cure process of the nanocomposite and the theoretical prediction was in good agreement with the experimental cure curves.
提出一种新型的复合垂直流湿地系统(IVCW)，并对其反应动力学和系统的实际流态进行了研究。
A new type of integrated vertical-flow constructed wetland (IVCW). System was presented and its reaction kinetics and the actual flow pattern of the system were studied.
利用电子束离子源（EBIS）或者电子束离子陷阱（EBIT）产生的慢速高电荷态重离子束轰击金属靶面，离子束与靶面作用并复合辐射特征X射线；
The electron beam ion trap(EBIT) and the electron ion source(EBIS) are new instruments for the study of X-ray produced by very highly-charged ions when they interact with free electrons.
研究了铸态钛基复合材料和热锻后高温钛基复合材料的力学性能。
The mechanical properties of cast-titanium matrix composites and high-temperature titanium matrix composites after hot-forging have been investigated.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics is presented.
脱氢再复合后形成的微晶的磁畴结构则表明样品保留了铸态样品柱状晶的构型。
And for the samples after sufficient DR process, it isc onfirmed by the detected domain structures that the configuration of the column -like crystals retains.
经过分析和试验，开发出一种新的高效球化剂和一种新的高效复合随流孕育剂，制定出铸态生产工艺。
By analysis and experiment, a new type of noduler with high efficient and a new type of high mixed in-flow inoculant have been developed, and the as-cast production was made.
与实验比较，给出了隙态分布的位置、宽度和高度，也给出了电子迁移率和复合系数。
Compared with the experimental results, the position, width and peak of distribution of states in gap, and also the electron mobility, cross section ot capture are obtained.
应用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。
The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.
这种复合材料是由陶瓷开始在玻璃态基质材料和转换从玻璃状态后复合材料的致密陶瓷的状态。
The composite is formed by starting with the ceramic matrix material in the glassy state and converting it from the glassy state to the ceramic state after densification of the composite.
复合材料与基体从固溶态到峰值硬度的时效动力学曲线满足指数关系。
The aging kinetic curve of ZL109 and the composite agreed with the power function.
另外，由于气相中高度复合的缘故，提高气压可减少原子态氢的数量。
Additionally increasing the gas pressure reduces the amount of atomic hydrogen due to higher recombination in the gas phase.
研究发现，未煅烧之前复合纳米纤维，缺陷态发光较强；
The study founded that composite fibers were not calcined before showed a stronger defect states light;
“矩”方法可以用于研究分析这种聚合物或复合物激发态单指数或多指数衰减。
Conventinal simple procedure fails. The method of moments is used to establish a means of analyzing such mono-or multi-exponential decays.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics...
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics...
应用推荐