本文对该方程组采用载荷增量法进行迭代求解。
The load increment method is used for the solution of the nonlinear algebraic equations.
采用位移和应力联合控制的增量法控制加载过程。
The loading procedure is controled by the incremental method which is jointly controled by the stresses and the displacements.
考虑到施工过程的影响，提出应用增量法进行计算。
Taking into account the impact of the construction process, the incremental method were proposed in this paper.
在ISE模式下，用户可在多种增量法中进行选择。
During ISE Mode, the user has a choice of several incremental methods.
结论逐步增量法是构建脊柱外伤的一种可靠的方法。
Conclusion Incremental trauma approach is a reliable method in the establishment of fracture of the human spine.
提出了一种改进的电导增量法的最大功率跟踪控制算法。
A new MPPT control strategy based on Incremental Conductance Algorithm (INC) is proposed.
首先利用荷载增量法将薄板弯曲的非线性微分方程线性化。
At the first, the nonlinear differential equations for the bending of a thin plate are linearized by means of incremental loading method.
为了进一步提高测量精度，采用了基于力传感器的增量法测量。
In order to improve the precision of measuring further, increment means based on strain-flake sensor is adopted.
采用拖带座标系和逐步增量法。还讨论了大挠度对载荷的影响。
Comoving coordinate system and incremental process are adopted and the effect of large deflection on loads is also discussed.
先期固结压力按次固结增量法进行校正，固结系数则可不作校正。
The early period consolidation pressure is rectified using the sub-consolidation increment method, while the consolidation coefficient does not need rectification.
通常的增量法X射线衍射定量相分析需用纯相作增量剂，条件苛刻。
The pure doping samples of single phase are necessary to the common doping methods in quantitative X-ray diffraction phase analysis.
采用摄动-增量法研究电机工程中一类强非线性振子的极限环和同宿轨线。
Investigates a class of strongly nonlinear oscillators in electrical engineering by using the perturbation incremental method.
将该方法用于某汽车翼子板成形模拟，并与增量法模拟结果及实验结果进行了对比。
This method was applied to simulate an automobile front fender, and its results were compared with the results of experiment and simulation by incremental method.
同时，利用荷载传递法及非线性分析的增量法，获得荷载-沉降关系等系列解析算式。
Meantime, by using the load transfer method and the nonlinear-analysis increment method, a series of analytical formulae are deduced to define the load-settlement relation and so on.
介绍了一步成形法模拟软件的应用领域、基本原理和方法以及同增量法模拟比较的优点。
The application fields, basic principle and FEM of one step forming simulation software and its advantages compared with incremental method simulation have been introduced.
本文采用塑性应变分量的分部屈服概念，提出了适用于增量法计算的分部屈服加载准则；
This paper, adopting the Concept of divitional yield of plastic strain components, proposes a loading criterion of divitional yield, which is suitable for incremental numerical method.
求解方程时，在时间域上采用差分法进行离散，给出了求解系统方程的直接法和增量法。
Differential method is used for the discretion of time zone, and a direct solution method and an incremental solution method are given out for the solution of the non-linear system equation.
本文用有限元素法和对于几何非线性结构问题的增量法求解组合结构强度与稳定性问题。
This paper is devoted to solving strength and stability problems of a built structure by using the finite element method and the increment method for the geometrical nonlinear structural problem.
再次，应用有限元方法建立平带的有限元模型，并以此为基础使用增量法建立V带模型。
Thirdly, the flat belt's finite element model has been established using finite element method, on which a V-belt model has been established using the increase law.
介绍了对间接测量量进行误差分析的误差传递法，并提出了另一种分析方法——函数增量法。
This paperintroduces an error transmission method for analyzing the error of indirect measurement, and puts forward another analysis method—function increment method.
再次，运用增量法的原理，用ANSYS分析地下室结构施工期间在温度、收缩变形作用下的应力场。
Thirdly, we apply the theory of increment method to analyze the stress field of basement in construction period under the action of temperature and shrinkage strain by finite program ANSYS.
文中采用针对交易功率总量计算的增量法确定交易在线路中的潮流份额，适用于日前市场的阻塞费用结算。
Aggregated allocation approach is adopted to determine the power flow in the congested line caused by each transaction, which makes the proposed method suitable for accouting in day-ahead market.
该文应用具有平衡迭代格式的荷载增量法对非保守力作用下鞭天线结构的几何非线性问题进行了有限元分析；
The geometric nonlinear problem of whip antenna structure underthe action of nonconservative loads is analyzed by means of the loading incremental method which has the balanceiteration format.
文中介绍了单极式光伏系统的拓扑结构和实现最大功率的工作原理，阐述了电导增量法实现MPPT的基本思想。
This paper introduces the topology and MPPT s principle of single-state PV system, as well as the basic principle to realize MPPT by conductance increment method.
本文介绍了单极式光伏系统的拓扑结构和实现最大功率的工作原理，阐述了电导增量法实现MPPT的基本思想。
This paper introduces the topology and MPPT's principle of single-state PV system, as well as illuminates the basic principle of MPPT realized by conductance increment method.
本文介绍了单极式光伏系统的拓扑结构和实现最大功率的工作原理，阐述了电导增量法实现MPPT的基本思想。
This paper introduces the topology construction and operation principle of single-stage photovoltaic system, mainly illuminates the basic principle of MPPT realized by conductance increment method.
详细介绍了固相增量法模型并将它应用于模拟土壤蓄冷与释冷的相变过程，初步分析了土壤蓄冷、释冷的运行特性。
Presents the solid phase increasing method in detail and applies it to simulate the phase change process. Analyses the operation performance of soil charge and discharge.
详细介绍了固相增量法模型并将它应用于模拟土壤蓄冷与释冷的相变过程，初步分析了土壤蓄冷、释冷的运行特性。
Presents the solid phase increasing method in detail and applies it to simulate the phase change process. Analyses the operation performance of soil charge and discharge.
应用推荐