有关橡胶被树脂增粘的机理尚未完全了解。
The mechanism of tackification of rubbers by resins is not completely understood.
原则上，通过协作行动以抑制(即使不能逆转)另一个增长的问题——粘增，应该也是可能的。
In principle, it should also be possible with concerted action to arrest, if not reverse, another growing problem, the rise of slime.
探讨了浸胶液在聚酯帘子线与橡胶之间的作用机理以及增粘作用。
The interaction mechanisms and function of adhesive between polyester cord and rubber were discussed.
疏水缔合聚合物的浓度越大，其表观流体力学半径就越大，从而造成其增粘能力越强。
The increase of the polymer concentration enlarges its hydrodynamics radius, resulting in the increase of the thickening property.
环氧树脂是聚硫密封胶常用的增粘剂，在聚硫密封胶中加入环氧树脂可以起到明显的增粘作用。
Epoxy resin is the common tackifier for polysulfide sealant. Adding epoxy resin into polysulfide sealant can exert an auxiliary effect on viscosity increasing.
PGA与羧甲基纤维素（CMC）具有良好增粘效应，但与海藻酸钠之间的效应较复杂。
There is good viscosity synergism between PGA and CMC, the synergism between PGA and sodium alginate is more complex.
用新型旋转扭矩探测仪对铝合金熔体增粘过程中的粘度进行了实时检测和控制，研究了熔体粘度的变化规律以及粘度对孔结构的影响规律。
The real time measurement and control of the viscosity were achieved in the preparation process of al and al alloy, revealing the rule of viscosity change as well as the influence on pore structure.
介绍了粘合剂的成膜剂、增粘剂、粘接促进剂、偶联剂、固化剂、填料和溶剂等组分的主要品种和作用。
The sorts and the function of components in the adhesives, including film-forming agents, adhesion synergists, adhesion promoters, coupling and curing agents, fillers and solvents, were introduced.
分析和论述了纺纱产生缠绕的机理，提出静电吸附、机械挂带、油脂粘附、湿涩增粘是胶辊缠绕的主要因素。
Mechanism of spinning entangling is analyzed and described regarding the main factors such as static absorption, mechanical hitching, and oily and wet sticking.
增施有机肥有利促进各复合体，特别是粘粒复合体有机质的活化。
Applying more organic manure could accelerate the activation of organic matter in various complexes, especially in the clay complex.
对复合增粘树脂在全钢载重子午线轮胎中的应用进行了试验研究。
An experiment study was made on the application of the tackifying resin complex to allsteel radial truck tire.
性能评价结果表明：其增粘效果好，抗温性能好，与各种酸液添加剂也有很好的配伍性。
Performance appraisement shows: it has good tackify effect, temperature-tolerance performance, and compatibility with various acidizing liquid additives.
通过实验研究了基质沥青、橡胶改性剂、增粘剂和增塑剂对自粘橡胶沥青防水卷材性能的影响。
This paper studies experimentally factors of influencing performance of self-adhered rubber modified asphalt waterproofing membrane, such as asphalt, rubber modifier, tackifier and plasticizer.
研制了一种以SIS为基体物质的汽车热熔灯具胶，探讨了增粘树脂、蜡类、偶联剂等对热熔胶性能的影响。
A new hot melt automobile lamps adhesive mainly made of SIS was prepared. The influence of various factors, such as tackiness resin, wax and coupling agent were discussed.
以丁基橡胶为主体材料，加入增粘剂及其它助剂，研制了一种对PP、PC等非金属材料及金属材料皆有很好粘接性能的热熔胶。
Using butyl rubber as the base material, tackifier and some auxiliary additives, the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with PP, PC and metals.
研究以PVC糊树脂为基础、聚氨酯为增粘树脂的双组分塑料门窗与墙体接缝用填缝胶。
The double-component polyurethane sealant based on PVC paste resin used for sealing the joints be-tween PVC windows and concrete wall was studied.
研究了国产辛基酚醛增粘树脂在全钢载重子午线轮胎内衬层胶中的应用。
The application of a domestic octyl phenolic resin to the inner liner of all steel radial truck tire was investigated.
研究了硅硼增粘剂和钛酸酯增粘剂对加成型液体硅橡胶的黏度和粘接性的影响。
The effects of silicon-boron and titanate adhesion promoter on the viscosity and adhesion of the addition cure LSR were studied.
讨论了丙烯酸树脂、增粘树脂、交联剂等对双面压敏胶带性能的影响。
Effect of acrylic resin, tackifying resin and cross linking agent on properties of double sided pressure sensitive tape was discussed.
冻胶压裂液是一种报道较少的压裂液体系，该压裂液具有增粘能力强、携砂性好、摩阻低、冻胶水化破胶后残渣少等优点。
The system has strong ability of increasing viscosity, good prop-carrying capacity, low frictional resistance, less residue after gel-breaking and so on.
现在的石油钻井技术要求聚阴离子纤维素(简称PAC)具有更好的抗盐、抗钙、抗高温性能和明显的增粘作用。
Current drilling technology requests that polyanionic cellulose (PAC) has better properties to tolerate salt, calcium, high temperature, and enhance mud viscosity remarkably.
简要叙述了T803B在不同粘度的石蜡基基础油和与不同粘度指数改进剂相匹配时的增粘降凝效果，并指出该剂的最佳经济适宜用量。
The effects of increasing viscosity and depressing pour point of T803B in paraffin base oils withdifferent viscosity while matching with different Vlls were described.
本文就粘指剂在车辆齿轮油中的应用进行了考察，结果显示不同粘指剂在应用过程中对油品的低温性能、增粘效果、剪切安定性等形成不同的影响。
In this paper, properties of automobile gear oil used different viscosity improvers, such as viscosity, brookfield viscosity, low temperature fluidity, shear stability, etc. are studied.
对三元乙丙橡胶具有一定的增粘作用，可作为固体橡胶的改性剂。
This rubber can also be used as modifiers for improving the adhesion properties of some solid rubbers, such as EPDM.
还研究了偶联剂、填料和增韧剂等对粘接强度的影响。
The effects of coupling agent, filler and toughening agent on adhesive strength were also studied.
文中对相关的增粘、稳粘作用的机理进行了简要阐述。
This paper briefly described the mechanism of viscosity addition and stability.
本文制备湿固型MDI- 聚醚基聚氨酯热熔胶，研究了MDI-聚醚预聚物结构、增粘树脂等对胶粘剂剥离强度的影响。
The hot-melt moisture cure PU adhesives have been prepared. The effects of the structure of the MDI-polyether prepolymer, tackify resins on peel strength of the adhesives have been studied.
研究了固化剂用量及丁腈羟用量对粘接性能的影响及这种增韧环氧树脂的玻璃化转变、动态力学性能和电性能，并对反应机理进行了初步探讨。
The effects of the amounts of curing agent and HTBN on the adhesive properties, as well as glass transition temperature, dynamic mechanical properties and electrical properties were investigated.
结果表明，SPX树脂单独使用就具有抗饱和盐、抗高温、非增粘降滤失的作用，而且降滤失效果良好；
Results reveal that SPX exhibit good saturated-salt resistance, thermal stability and filtrate control without viscosity increasing when be used alone;
通过将多孔介电层经中间的增粘介电层粘合到基本上无孔的贴面层上来制备本发明的结构。
The structures of the invention are prepared by adhering a porous dielectric layer to a substantially nonporous capping layer via an intermediate adhesion promoting dielectric layer.
应用推荐