并根据宽波束超声波流量计的特点重点进行了自动增益控制放大器和跟踪带通滤波器的设计。
Based on the characteristic of the Wide-beam ultrasonic flowmeter, automatic gain control amplifier and the tracking band-pass filter are devised.
当接收到短脉冲检测开始触发信号时,向自动增益控制放大器(201)输出一个增益控制信号,以便用最大值进行放大。
Upon reception of a burst detection start trigger signal, a gain control signal is output to an automatic gain control amplifier (201) so as to perform amplification with a maximum value.
采用自动增益控制(agc)技术实现的宽频带放大器在雷达系统及其他相关电子领域有着广泛的应用。
Wideband amplifier, realized by the technology of automatic gain control (AGC), is used widely in radar system and other correlative electronic fields.
这种运算放大器的增益电压控制,并可以通过P2电压变化调整。
The gain of this operational amplifier is voltage controlled and can be adjusted by voltage variation through P2.
仿真结果表明,改进控制电路后的系统不但解决了输出直流偏置问题,而且解决了电压补偿方法所造成的放大器增益下降问题。
The simulation results show that the amplifier of improved control circuit not only solve the question of output DC offset, but also keep the voltage gain lowered by voltage compensation technique.
介绍了一种实用的程控增益技术,该技术利用DAC0832作为程控增益放大器,具有良好的控制特性,线性度好。
This paper introduces a sort of program-controlled-gain technology, which makes use of DAC0832. The amplifier has good control and linear characteristic.
通过计算机对接收机增益进行智能化控制,既避免了放大器饱和,又使得采样的量化误差最小。
The smart gam-control of the receiver not only avoids the amplifier saturation, but also minimizes the discrete error.
在比较器和受控放大器之间接上一个对数放大器,就可以使增益控制特性为指数函数的AGC系统严格线性化。
It is also demonstrated that the AGC systems with exponential gain control characteristic may strictly be transformed into a linear system by using any logarithmic amplifier.
积分信号处理包括一个动态的AGC(自动增益控制)电路,立体声交叉和信号的扭曲的信号,防止内部放大器的限制。
Integral signal processing includes a dynamic AGC (Automatic Gain Control) circuit, a stereo crossover and signal limiting for the prevention of a distorted signal to the internal amplifier.
而且,可以发送增益值,它可用来控制在8-PSK操作期间的收发信机中的可变增益放大器(VGA)。
Furthermore, a gain value may be sent which may be used to control a variable gain amplifier (VGA) within the transceiver during 8-PSK operation.
提出一种自动量程切换电压测量系统的设计方法,该系统基于程控增益放大器器件,使用单片机控制其增益实现量程的自动切换。
It presents a system of voltage measurement with self-scale, based on the program control amplifier controlled by the single chip computer.
本文重点介绍了KD1411的以下三个主要特点:(1)增益可编程控制的微弱信号放大器的设计;
This paper lays stress on the description of the three main features of KD1411: 1. the design of weak signal DC amplifier with programmable gain;
提供了一种音频放大器的输入增益控制设备和方法。
Provided are input-gain control apparatus and method of an audio amplifier.
然后经过一级可变增益放大器,在经过A/D变换,通过单片机串口将数字数据传输到ARM主控制板内进行处理。
Then after a variable gain amplifier, After A / D conversion and through the microcontroller serial digital data to the ARM within the main control panel for processing.
该系统中的硬件包括D/A和A/D转换接口、程控增益放大器、多路取样阀门控制接口等;软件包括在线流程分析和常规分析软件。
Hardware interface includes A/D, D/A converters, programmable gain controller and multiplex sampling valve controller. software includes on-line process analysis and normal analysis unit.
本文在前人的基础上分别提出电光调制器自动偏置控制和射频放大器自动增益控制方案。
In this paper, on the basis of our predecessors, I proposed separately by electro-optic modulator automatic gain control and automatic bias control program.
结合现代放大器与数字电位器的优点,实现了程序可控制增益范围的指标要求。
This design adopts the virtue of modern-amplifier and digital potentiometer to attain the programmable index require.
该MAX15058采用了具有高增益跨导误差放大器电流模式控制架构。
The MAX15058 utilizes a current-mode control architecture with a high-gain transconductance error amplifier.
可编程增益运算放大器的电压增益变化可以通过数字控制的开关电阻网络来实现。
The variation of voltage gain of the PGA can be realized by switched resistor-network, which is digitally controlled.
本发明提供一种具有自动增益控制功能的无线接收器及自动增益控制方法,其中,该接收电路包含可程序化增益放大器以及低噪声放大器。
A wireless receiver with automatic gain control and a method for automatic gain control of a receiving circuit utilized in a wireless receiver are provided.
在电路设计中主要包括开关电容采样的全差分运放组成的采保增益电路和两相时钟控制的带预放大器的锁存比较器。
The key circuit design includes a sample-and-hold gain circuit using switched-capacitor to sample or hold the signal and a preamplifier-latch comparator using two-phase clock.
在电路设计中主要包括开关电容采样的全差分运放组成的采保增益电路和两相时钟控制的带预放大器的锁存比较器。
The key circuit design includes a sample-and-hold gain circuit using switched-capacitor to sample or hold the signal and a preamplifier-latch comparator using two-phase clock.
应用推荐