CQF系列采用全氟塑料增强合金制造。
CQF series pump is made up of fluorin plastic enhanced alloy.
但用来制造管道的钢中通常掺入了合金成分钴来增强材料的强度。
The steel used in the pipes, however, is usually alloyed with cobalt to make it stronger.
采用粉末冶金法制备了微米尺寸和准纳米尺寸的氧化镧粒子增强钼合金。
The molybdenum alloy reinforced by lanthana particles with the sizes of nanometer and micron was prepared by powder metallurgy.
本文就粘结剂对硅酸铝纤维增强ZL 109合金复合材料冲击疲劳性能的影响进行研究。
In this paper, the influence of binders on the fatigue behavior of aluminosilicate fibre reinforced ZL109 alloy composites was studied.
采用挤压铸造技术制备短纤维增强铝硅合金梯度复合材料，研究了这类材料的凝固组织和耐磨性能。
The short fiber reinforced aluminum silicon alloy gradual composites are manufactured by squeeze casting, and the structures and the wear resistance of the composites are studied.
本文在国产氧化铝短纤维基础上，研究了氧化铝短纤维增强铝硅合金复合材料的凝固组织。
In this paper, the solidifying structure of alumina short fiber reinforced aluminum-silicon alloy composite is studied on the basis of domestic alumina short fibers.
铝及铝合金化学氧化后涂漆，可大大提高基体与涂层的结合力，并增强铝材的抗蚀能力。
With chemical oxidizing and subsequently paint ing of aluminum and its alloy, adhesion of aluminum substrate with coatings coul d be greatly improved, as well as corrosion resistance.
颗粒增强是提高合金性能的重要手段之一。
Particle - enhance is the way to improve the property of solder alloy.
结论铁合金颗粒使成骨细胞OPG基因表达下降，使破骨细胞分化、活化功能增强，这可能是导致假体松动的骨溶解机制之一。
Conclusion Titanium alloy particles decrease expression of OPG gene in human osteoblasts, and this may contribute to the differentiation of osteoclasts which may lead to the periprosthetic osteolysis.
本文研究了超高强的非晶态合金带增强高性能聚合物的复合材料。
The superhigh strength amorphous metal ribbon reinforced higher character polymer matrix composites was studied.
对不连续碳纤维增强ZA - 12合金基复合材料的挤压铸造工艺进行了研究。
Fabrication technique of discontinuous carbon fibers reinforced ZA-12 alloy matrix composite was studied.
结果表明：复合材料的耐磨性高于基体合金，随碳化硅含量的增加，其耐磨性逐渐增强。
The result shows that the wearing ability of the compound material is superior to that of the basis alloy and with the increase of the amount of carborundum, it is gradually enhanced.
利用挤压铸造制备了氧化铝纤维增强铝硅合金复合材料，研究了这种材料的界面对其耐磨性的影响。
A alumina short fibre reinforced aluminum silicon alloy composite is manufactured by squeeze casting. The effect of the composite's interface on its wear resistance is studied.
利用挤压铸造制备了氧化铝纤维增强锌合金复合材料，研究了氧化铝纤维对锌合金复合材料凝固组织的影响。
Alumina fiber reinforced zinc alloy composites were manufactured by squeeze casting, and the effects of alumina fibers on the solidified structures of the zinc alloy composites were studied.
用原位合成法制备了纳米颗粒增强铝基复合材料，研究了复合材料微观组织、室温拉伸强度、塑性，并与基体合金进行比较。
Microstructure, plasticity and mechanical properties at room temperature of the nano particle reinforcement aluminum matrix composites fabricated by in situ reaction and matrix alloy were studied.
以N2，O2作载气，通过催化增强化学蒸气沉积（CECVD）分别制得在聚酰亚胺上的金属铂、钯及其合金薄层。
Pd, Pt and their alloy films on polyimide were prepared by Catalyst-Enhanced Chemical Vapor Deposition (CECVD) under the carrier gas (N2, O2).
从研究结果来看，阳极氧化表面处理将颜色单一的钛及其合金提供了多种的色彩，增强其观赏性。
The results from cell compatibility experiment reveal that anodize oxidation treatment can improve the biocompatibility of titanium and its alloy.
利用金属蒸汽真空弧（MEVVA）源所产生的强束流离子注入铝研究了相变、增强扩散和钇铝合金的形成条件。
Phase transition, enhanced diffusion and Y-Al alloy formation are studied using Y implantation with high current extracted from metal vapor vacuum arc (MEVVA) ion source.
根据合金凝固过程中的守恒定律和传输原理，建立了纤维增强二元铝合金的凝固模型。
The solidification model of fiber reinforced binary aluminum alloy was established according to the conservation law and the transfer principle of alloy solidification.
利用理论和数值方法研究了形状记忆合金增强复合材料的宏细观力学性；
The macro and micro mechanical behavior of smart composite materials reinforced by SMA was described by an analytical and numerical approach.
在结构中埋入形状记忆合金丝网络，对增强结构强度、改善自修复的质量均起到了良好的作用。
The shape memory alloy (SMA) wire network was embedded to enhance the structure strength and improve the quality of self-repairing.
研究了玻璃纤维增强环氧圆柱管作为缓冲装置的撞击吸能特性，并与铝合金圆柱管的吸能特性进行比较。
The crashworthiness of grass fiber reinforced epoxy tubes as collision bumper is studied and a comparison of absorption property with aluminum alloy tubes is made.
通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.
该垫片由金属合金丝增强高温基布，涂覆耐高温的胶涂料。
The gasket enhanced by the high-temperature metal alloy wire fabric, coated with high temperature resistant plastic coating.
本文所研究的陶瓷复合装甲由铝合金、玻璃纤维增强复合材料(玻璃钢)、抗弹陶瓷三种材料复合而成。
The ceramic composite armor related to this thesis is composed of aluminum alloy, glass fiber reinforced composite and engineering ceramics.
利用消失模铸造压力凝固技术增强AZ91D镁合金补缩能力。
Feeding capacity of AZ91D magnesium alloy is enhanced by using pressure solidification in lost foam casting(LFC).
实验表明，渗覆金属处理可以使粘结合金或金属对金刚石的粘结力大大增强。
Experimental results showed that the bonding strength of metal-coated diamonds with alloy or metals was improved markedly.
基体中加入与铝合金基体电位不同、高体积分数的碳化硅和石墨颗粒增强材料，可能导致材料的耐蚀性降低。
Anticorrosion of aluminum material may decrease when it is reinforced using SiC and graphite particles with high volume fraction and potential different from substrate.
增强体与基体合金界面非常洁净，没有任何界面反应。
The interface between reinforcement and matrix alloy is very clean, there is no interfacial reaction.
增强体与基体合金界面非常洁净，没有任何界面反应。
The interface between reinforcement and matrix alloy is very clean, there is no interfacial reaction.
应用推荐