利用空心微珠球型的特性,填充改性玻纤增强尼龙6。
The glass fiber reinforced nylon 6 was modificated by the filling of the hollow microsphere.
本课题主要研究了聚丙烯的共混改性,填充改性以及混杂改性。
Blending modification, filling modification and hybrid modification of PP are studied in this paper.
主要介绍PTFE的成型工艺、填充改性品级及其在密封上的应用。
The paper introduces mainly the PTFE forming technology, filled and modified grades and its application in the sealing.
在塑料填充改性领域中,一般采用超微细或纳米无机粉体作为填充材料。
In the field of filled modified plastics, the superfine or nanometer inorganic powders usually were used as a filling materials.
利用塑料填充改性机理,在进行塑料原料、填加剂选择基础上,进行塑料填充改性工作。
Based on selection of plastic material and filling agent, filling and modifying for the plastic are performed by the mechanism of plastic filling and modification.
本文报道了利用梨树大顶山硅灰石填充改性尼龙6,研究了共混复合材料的物理、化学性能。
In this paper, the modified Nelon-6 with wollastonite from Dadingshan in Lishu was reported. The physical and Chemical properties of the modified material were studied.
以玻璃微珠为填料制备了玻璃微珠填充改性含油铸型尼龙复合材料,研究了复合材料的摩擦学性能和热性能。
The composite material oil filled MC nylon with glass beads as the filler was prepared. The tribological and thermal properties were investigated.
本文介绍了其填充机理和它在PVC与改性PE微孔泡沫片材生产中的应用情况及其效果。
The filling mechanism and result in the application to PVC and modified cellular PE sheet are introduced in this paper.
本文研究了丙烯酸酯共聚物(acr)改性聚氯乙烯(pvc)及其填充复合物的配料比和加工条件对冲击强度的影响。
This paper discussed the influence of the formulating ratio and processing condition of the ACR modified PVC and its filled compound on the impact strength of these polymers.
以pvc、SBS、CPE作为共混组分,采用不同的填充体系,与其他助剂进行共混改性,得到了共混弹性材料。
Blended elastic material was obtained with components as PVC, SBS, CPE and different fillers blended with other AIDS for modification.
试验表明改性粉石英填充pe薄膜,具有较好的工艺性能,薄膜力学性能优良,生产成本低。
The active Powder quartz fill in PE film have better machining and mechanics capability and produce cost be low.
研究结果表明,改性产物具有较好的填充性能,采用适当的应用工艺,改性产物可能用作皮革填充剂。
The results show the modified product has better filling properties. With the helps of a proper process, the modified products can be used as filler in tanning industry.
经改性后的活性伊利石粉可作为橡塑制品的填充料。
The active illite powder after modification can be used as the stuffing of rubber and plastic.
以七台河矿区煤矸石为原料,通过改性药剂选择试验和橡胶填充试验筛选最佳表面改性剂。
Using coal gangue of Qitaihe as raw material, the best surface medication agent was screened through the test of medication choosing and rubber filling.
研究了yb超分散剂改性滑石粉填充聚丙烯(PP)复合材料的流变行为及力学性能。
The rheological behavior and mechanical properties of PP composite filled with YB hyper-dispersant modified talc were studied.
以氢氧化镁为阻燃剂,硅烷偶联剂为改性剂,不同填充量的氢氧化镁加入到聚丙烯中所得的复合材料的阻燃和力学性能。
It had been reported that the flame retardant effect of magnesium hydroxide filled polypropylene containing silane coupling agent had been investigated by blending methods.
实验结果表明,赤泥可作为聚氯乙烯的填充剂、改性剂使用,赤泥聚氯乙烯塑料地砖具有一定的工业应用价值。
Experimental results showed that red mud could be used as filler and modifier for PVC. Red mud-PVC plastic floor tile has a certain value in industrial application.
结果流变改性剂的种类和用量、树脂的配比都影响高填充量填充材料的流变性。
Results The rheological property of the high filler content material is influenced by the sort and quantity of the rheological modifier and the polymer ingredient.
本文介绍了PV C化学建材的环保化及其无毒助剂,主要是稀土类稳定剂、填充剂、加工改性剂。
Environmental protection of the chemical material-PVC and its innocuous agent was introduced in this paper, especially REC stabilizers, filling agents and processing modifiers.
将滑石、硅灰石等天然矿物通过超细粉碎和表面改性制成了性能较好的硅橡胶补强填充剂。
The reinforcing filler of silicone rubber with good properties was prepared with talcum and wollastonite as raw materials by ultrafine crushing and surface modifying.
填充橡胶试验证实改性后伊利石的填充性能有显著提高。
The filling properties of the modified one were greatly improved, which had been confirmed by the application experiment.
研究了马来酸酐接枝天然橡胶(MNR)作为改性剂,对废报纸粉(PF)填充聚氯乙烯(PVC)复合材料的力学性能和热学性能的影响。
Maleic anhydride grafted natural rubber (MNR) was used as modifier, and its effect on the mechanical properties and thermal property of waste newspaper flour (PF) filled PVC composites was studied.
本文从纤维增强PEEK、颗粒填充PEEK、PEEK表面改性、与聚合物共混等方面综述了PEEK改性研究的进展情况。
Enhancement of PEEK by adding continuous fibre and short fibre, particle fillers, surface modification and blend with polymers were reviewed.
以改性聚硫橡胶为基胶,并与增塑剂、增稠剂、填充剂等配合制成双组分改性聚硫中空玻璃密封剂。
Modified polysulfide sealants for insulating- gl ass are mainly made from modified polysulfide rubber, plasticizer, thickener and fi ller and it is a two-component sealant.
通过对改性产品接触角测量和红外光谱分析,探讨了颗粒粒度、表面性质、晶体结构对填充橡胶性能的影响。
Through measures such as surface contact Angle method and infra-red spectrum, the effects of particle size, particle surface activity, particle shape, etc were studied.
阐述了用表面活性剂类防静电剂、导电性填充料及有机阻燃剂对聚丙烯实现防静电阻燃改性的原理;
The principle of the PPs anti static and fire retardancy modification by means of anti static additive of surfactants, conductive materials and organic fire retardancy additive is elaborated .
综述了近年来聚乙烯和聚丙烯在接枝、交联、填充、共混等方面的改性进展,并指出了研究方向和发展趋势。
Advance in modification of polyethylene and polypropylene, namely grafting, crosslinking, filling and blending, was reviewed and the development trend was discussed.
对其进行阻燃改性最常用的方法是把无机阻燃剂填充到聚合物基体中赋予聚合物以阻燃性。
On the flame retardant modification of the most commonly used method is to fill the inorganic flame retardant in the polymer matrix polymer with flame retardancy.
对其进行阻燃改性最常用的方法是把无机阻燃剂填充到聚合物基体中赋予聚合物以阻燃性。
On the flame retardant modification of the most commonly used method is to fill the inorganic flame retardant in the polymer matrix polymer with flame retardancy.
应用推荐