模拟了聚乙烯填充体系淘析器内的三维流场。
Three-dimensional flow field in the elutriator of polythene packed system is simulated.
本文研究了碱土金属盐填充聚丙烯复合材料增韧机理及碱土金属盐含量对填充体系性能的影响。
This article deals with the toughening mechanism of PP composite filled with alkaline earth salt and effects of amount of alkaline earth salt used on the properties of the composite.
内部设备陈旧方面，引进整体厨卫、集中化管道设施以及适应多样变化的填充体系统等先进措施。
About the internal obsolete equipment, the introduction of the Integrated Kitchen&Bath, centralized pipeline facilities, and adapt to changes in various measures for the filling-body system advanced.
分析了不同保温填充体系、分散体系和偶联体系对母料加工及成膜性的影响，用于指导生产。关键?。
Effects of different insulation packing system, dispersing system and coupled system to parent material processing and film forming are analyzed to direct the production.
结果表明：用马来酸酐接技聚丙烯与WD 52偶联剂处理过的填充体系综合性能最优，并使PP球晶细化。
The results showed: the comprehensive properties of the composite processed with ppg-MAH and WD-52 was excellent and made the crystal fine.
以pvc、SBS、CPE作为共混组分，采用不同的填充体系，与其他助剂进行共混改性，得到了共混弹性材料。
Blended elastic material was obtained with components as PVC, SBS, CPE and different fillers blended with other AIDS for modification.
研究了氟橡胶加工体系中硫化体系、吸酸剂、填充体系、加工助剂等各个因素对氟橡胶加工性能、常温力学性能的影响。
Studies about the influence of vulcanizing system, acid accepter, processing agent and filling system on processing properties, mechanical properties and heat resistant properties was did.
通过炭黑N330单独填充、沉淀法白炭黑单独填充和炭黑白炭黑并用，研究了填充体系对原位共混型聚丁二烯橡胶性能的影响；
The properties of carbon black N330 single applied, silica single applied and carbon black with silica applied to in situ PB were studied;
本文系统地研究了增韧剂氯化聚烯烃（M_1）和腈基橡胶（M_2），增塑剂邻苯二甲酸二辛酯（P）以及几种不同填料对硬质PVC填充体系力学性能的影响。
The effects of common impact modifiers M_1 and M_2, plasticizer P and different fillers on the mechanical properties of filled PVC were studied systematically in this paper.
和其他银行相比，银行业巨头们可能将被迫填充更多缓冲资本，因为它们一旦垮掉，整个金融体系将受到损害。
Very big firms will likely have to stuff their cushions a bit more than the rest because of the harm they can cause to the entire financial system if they collapse.
研究了炭黑填充丁基橡胶硫黄硫化体系的硫化特性。
The vulcanizing properties of CB filled IIR with sulfur curing system were researched.
它可以通过填充至普通泡沫体系中，也可以通过反应参与泡沫基体的合成及以自身为主体进行发泡成为泡沫制品。
It can become foamed products by being filled into common foam system, taking part in the synthesis reaction of foam matrix and foaming predominately by its own.
在固液相填充复合体系中，采用合理的颗粒级配可使颗粒排列更加紧密，提高堆积密度。
In composite system filled with solid and solid liquid phase, rational particle grade improve particles arrangement closer and increase stacking density.
利用高级流变扩展系统（ARES）研究了碳黑（CB）填充的高密度聚乙烯—乙烯和醋酸乙烯共聚物（HDPE/EVA）体系的流变学行为。
The rheological property of HDPE/EVA system filled with carbon black(CB) is studied with Advanced Rheology Expand System(ARES).
玻珠填充pp、PE体系符合非牛顿流体流变行为的指数定律。
Glass bead filled with PP and PE are pseudoplastic fluid system.
利用哈克流变仪对低熔点双组分合金填充聚合物材料体系的流变性进行了研究。
The rheology properties of polymer filled with lower melting point dual component metallic alloy were studied by Hakke rheometer.
因此，在富马酸铵体系中用固定化酶生产L-苹果酸采用填充床反应器更佳。
Thus, the PFR was optimal for immobilized cells to produce L-malic acid in ammonium fumarate system.
用热烘箱试验、差热分析和热重分析等试验方法，考察了钝化剂对矿物填充聚丙烯体系热氧稳定性的影响。
By using oven test, DTA and TGA, the effect of deactivator on the thermal-stability of PP filled with mineral was studied.
本文就这一体系进行了数值模拟分析，结果表明这种简易装置有助于提高填充墙体的耗能能力。
The numerical simulation is used to analysis this system, and the results show the device can improve energy-dissipating capacity of infilled wall.
本文研究了硅灰石填充不饱和聚酯树脂体系的一些基本性能，进而研究了模塑料的配方和性能并压制了绝缘制品。
This paper studies chiefly the basic properties of the composite of un-saturated polyester resin in which wollastonite powder is used as a filler.
结果表明在接枝度为15%、高岭土填充量为10%时，体系具有较高的拉伸强度。
The results showed when the grafting degree was 15% and kaolin content was 10% , the blend system had a better tensile strength.
首次提出了一种新型的空腔复合填充墙钢框架抗侧力体系。
Steel frame with cavity sandwich wall infill is a new style lateral resistant system of steel structure.
在天然橡胶与填充炭黑不同阶段的混炼加工过程中，不同份数的环氧基多功能添加剂（E-MFA）被加入到混炼体系中。
The epoxy-multifunction additive(E-MFA) was added into the carbon black filled natural rubber composites in the different process stages.
该结构体系中不设填充墙，主次结构功能明确。
No filling wall is arranged in the structural system and the main structure and the secondary structure have definite functions.
填充墙框架结构是房屋建筑结构中常见的一种结构体系。
Infilled frame structure is a common structure system of housing construction.
本文针对玻璃微珠填充聚丙烯这一刚性粒子填充聚合物复合体系进行了实验研究。
The properties of rigid particle filled polymers, glass bead-filled polypropylene with different interfacial designs are studied through experiments.
分别使用轻质碳酸钙和碳酸钙晶须对PP进行填充，研究了填料种类、填料量以及表面处理对体系性能的影响。
The influences of sort, quantity and surface treatment of fillers on properties of PP filled with lightweight calcium carbonate and aragonite whisker respectively were studied.
探讨了UF- 811增韧剂在填充配方体系中的混合、挤出加工过程中的工艺分析及在生产中应注意的控制要点。
Mixing of UF-811 in filling formulation, technological analysis of extruding process and control essentials in. manufacture were discussed.
利用广角X射线衍射分析仪对低熔点金属及合金填充聚合物材料体系的结晶行为进行了研究。
The crystallization property of polymer matrix filled with low melting metals and alloy was studied by wide-angle X-ray diffraction.
由于三种填料具有不同的微观形态，其对体系粘流活化能的影响是不同的，其中细颗粒填料填充的体系有较低的粘流活化能。
The viscous flow active energy is different because of different morphology of fillers, and the system filled with small size filler has a low viscous flow active energy.
应用推荐