汽车卡扣塑料扣塑料连接件，汽…
如今大多数的衣夹是利用弹簧将两片木头或塑料连接在一起。
Most clothespins today are two pieces of wood or plastic that are joined together by a spring.
应全面考虑时间、温度和注塑件上熔合缝对压力装配的影响，确保塑料连接件能传递一定的扭矩。
The effects of time, temperature and welding line on press fitting should be comprehensively considered to ensure certain transmitted torque to an assembling part.
本文介绍以eps块为保温模块，经塑料连接桥连接后搭接为空心墙体并浇筑自密实混凝土作为承重结构的HS - ICF保温隔热承重一体化复合墙体。
HS-ICF composite wall was made by EPS insulation module and self-compacting concrete, which had heat preservation, heat insulation and load-bearing properties.
一旦塑料变硬，并去除掉模具，手指就可以连接到基座上了。
Once the plastics harden and are removed from the molds, the fingers are ready to be hooked up to a base.
连接3间教室平台的材料是奶瓶再生塑料和刨花板，在夏季这些平台将用作户外教室。
Connecting the three classrooms is a deck made from recycled plastic milk bottles and wood shavings, and in the summer the deck will be used as an outdoor classroom.
ReWalk包括了一套外覆塑料的铝制框架，在腰和关节处有制动器相连接，还有一个双肩背包。
ReWalk consists of a set of plastic-covered aluminium struts, linked by actuator motors, that are strapped to the legs and waist, and a backpack.
他们成功的制造了利用轻质可伸缩塑料片连接的不锈钢袋子原型。
They successfully constructed a prototype of a bag made from a number of stainless steel plates, stuck on to a light, flexible plastic sheet.
弹性塑料墙体接点给墙体中过宽的缝隙提供了机械连接。
Robust plastic wall ties provide the mechanical link across this exceptionally wide cavity.
外科大夫用塑料管(俗称套管)把心肺机与患者连接起来。
The surgeon connects the plastic tubes (known as cannulae) from the heart-lung machine to the patient.
这个标准涵盖塑料美国锥管螺纹(NPT)的尺寸和计量方法，用于泄漏密封连接，现在已在所有有关塑料管道产品的ASTM标准中引用。
The standard covers dimensions and gaging of plastic tapered National Pipe Threads (NPT) for leak-tight joints, and it is now referenced in all ASTM Standards for plastic piping products.
宇航员们用塑料袋、板和胶布制作了一个连接器。
The astronauts made the connector from a plastic bag, cardboard, and tape.
外科大夫用塑料管俗称套管把心肺机与患者连接起来。
The surgeon connects the plastic tubes known as cannulae from the heart-lung machine to the patient.
主要组成部分的系统是一个连接装置由聚氯乙烯和聚苯乙烯泡沫塑料。
The primary components of the system are a connection device made from PVC and polystyrene foam.
上述塑料层的一开口端内表面开设有螺纹，该塑料层上的螺纹与金属嵌件上的螺纹相连接。
The inner surface at one open end of the plastic layer has the thread, and the thread on the plastic layer is connected with the thread on the metal insert.
频率控制和选则用表面安装的压电器件。标准外形和终端引线的连接。第1部分：塑料模压外壳外形。
Surface mounted piezoelectric devices for frequency control and selection - Standard Outlines and terminal lead connections - Part 1: plastic moulded enclosure Outlines.
一般地，如果没有准备好连接室内、外机组的配管，请勿拆卸部件(阀门、接头、橡胶、塑料圈及铜帽等元件)。
Generally, do not remove components (including valve, connector, rubber, plastic ring and copper cap) before the tubing for connecting indoor, outdoor units are prepared.
聚苯乙烯泡沫塑料是一种加工塑料，主要由被称作苯基团的碳环和氢环构成，苯基团连接到能降解成更小苯乙烯单元的长链碳氢化合物上。
Polystyrene foam is a manufactured plastic primarily made up of rings of carbon and hydrogen, called phenyl groups, attached to long hydrocarbon chains that can break into smaller styrene units.
一接头，设置在上述芯线及包覆层的首端与电源的供电线的连接处，用以包覆所述的铜绞合线与电源的供电线的电气连接的塑料罩壳。
A joint. It is set at the connection of the cover head of core with power supply wire to cover the plastic casing of electric connection of copper strand and power supply wire.
可应用于陶瓷、搪瓷、塑料、玻璃钢等材质的泵、阀、塔口的进出口连接。
Cans use in China, Porcelain enamel, plastic, Glass reinforced plastics wait for material quality's pump, valve, Pagoda mouth's entrance connection.
二是由于热熔连接是对塑料管的二次加工，使得优质塑料变成回用塑料，连接的可靠性降低。
Two is due to the hot melt connection is the plastic pipe of the two processing, make high quality plastic into recycled plastic, connection reliability.
塑料座式伸缩隔离带：又称一米线，就是能够自由伸缩连接的隔离带，被银行、医院、地铁等商务和公共场合广泛使用。
The Recoilable-Belt Rail with plastic base , also referred to as "one meter line" in China, is a retractable isolation rail extensively applied in banks, hospitals , metro and other public places.
网片和立柱靠螺丝和各类特殊的塑料或铁的卡子连接、所有的螺丝均为自动防盗的。
Mesh and columns by screws and all kinds of special plastic or iron clamp connections, all are automatic anti-theft screws to.
焊接技术是工程塑料管道的主要连接方法，直接影响高密度工程塑料管道的安全应用。
Welding technique is the main method used for joining engineering plastic pipe and directly influences the application of engineering plastic pipe.
多用塑料支架是由足、连接块、臂、面板四部分组成，通过称为凹接头和凸接头的不同装配，可以实现不同的用途。
The multi-use plastic support comprises feet, connecting blocks, arms, and a panel, which can be assembled differently by the called concave joints and convex joints to realize different usages.
采用坚固、质高等级工程塑料制造，配置实心黄铜连接件和聚乙烯浮球。
Manufactured using rugged, high quality engineered plastic with solid brass connections and polyethylene float.
与现有技术的塑料缠绕管材相比，本实用新型具有连接方便快捷、耐腐蚀性强、密封安全可靠等优点。
Compared with the plastic wound pipe of the prior art, the utility model has the advantages of convenient and quick connection, strong corrosion resistance, safe and reliable sealing and the like.
压力模头(图9)，当模头与导体连接时，塑料仍然受到模头的压力。
In the pressure die, Figure 9, the plastic is still under some pressure inside the die when it contacts the conductor.
压力模头(图9)，当模头与导体连接时，塑料仍然受到模头的压力。
In the pressure die, Figure 9, the plastic is still under some pressure inside the die when it contacts the conductor.
应用推荐