介绍常用塑料铰链联接、搭扣联接、卡夹联接、压力装配联接的联接件材料选择、成型方法、联接原理、形状设计等。
The material choice, moulding method, joint principle and shape design of hinge joint, hasp joint, clamp joint and press fit joint of normal plastics were introduced.
工程塑料是一种新兴工程结构材料，与金属材料相比，在选材、设计和使用方面缺乏系统完整的理论方法和资料。
Compare with metals material, engineering plastics are a sort of new type project structure material, and lack the complete theories method and data in design and choice of materials.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
采用基于特征的设计方法，通过定义分型面，由塑料制品直接生成成型零件；
By using the feature-based design method and defining the parting surface, parts can be directly formed from plastic products.
针对《塑料成型模具设计》课程的特点和目前的教学条件，从教学观念、教学方法、教学手段等方面进行了一系列探索与实践。
The teaching methods of the course of design of plastic shape-molding have been explored and practiced from the teaching concept, teaching method, teaching means, etc.
本文分析了异型(圆环型与矩形的组合)材成型时塑料熔体在模头中的流动机理，并给出了模口成型长度的设计方法。
While profile, the cross section was composed of annulus and rectangle, was extruded, the flow mechanism the plastic melt in the die was analyzed and the design method of die land was given.
讨论优化设计塑料注射成型机肘杆机构的方法。
The paper discusses the method of optimistic designing of joggle mechanism of plastic molding press.
介绍了固体火箭发动机喷管硬质泡沫塑料堵盖的设计方法与试验过程。
Design methods and test process of nozzle closure made of hard foamed plastics for SRM are introduced.
论述了热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.
通过对振动技术在塑料成型中应用的介绍，探讨了振动塑料模具的设计方法，用以指导生产可满足生产和使用要求。
Through the introduction of the application of vibration in moulding of plastics, the methods of designing the vibration moulds were discussed and can serve as a reference to production.
通过对模具结构、模具工作过程、卸模过程的详细分析，介绍了一种解决此类塑料件注射模的设计方法。
Over detail analysis of mould structure working process and disassemble dies process an injection mould design method of solving this kind of plastic parts is introduced.
该方法不仅适用于锻模，也适用于塑料模和压铸模等其它型腔模打模电极齿形设计。
This basic method are suitable not only for forging die, but also for design of tooth form of electrode machining of other molding die, such as plastic die, die for die casting mold etc.
介绍塑料齿轮键槽和轮毂的设计原则，以及常见的结构设计方法。
This paper introduces the design principles of keyslot and hub of plastic gear and common methods of structural design.
塑料管道系统。玻璃纤维增强式热固性塑料元件。检验带有弹性密封件的刚性锁定管座套筒接头设计的试验方法。
Plastics piping systems. glass - reinforced thermosetting plastics components. test methods to prove the design of rigid locked socket - and - spigot joints with elastomeric seals.
塑料管道系统。玻璃纤维增强式热固性塑料元件。检验栓接式法兰接头的设计试验方法。
Plastics piping systems. Glass - reinforced thermosetting plastics components. Test methods to prove the design of bolted flange joints.
通过分析塑料瓦楞板同步剪切的工艺过程，并结合工艺要求，提出了仿人智能控制系统的设计方法。
By analyzing technological process and combining technological requirements of synchronism shearing, the designing method of the intellect controlling system imitating human was put forward.
论述了模塑料注射成型的方法、工艺、设备和模具设计方面的问题。
Molding method, process, and equipment of injection molding of molding compound had been discussed in this paper.
总结出一套实用的连栋塑料温室设计的方法，以供设计人员参考。
A set of design method was summed up to fit the design of plastic greenhouse, which can be reference for designer.
为解决PET塑料加工温度范围较窄，工艺性较差的问题，提出了PET吹塑瓶坯热流道模具设计方法。
A design method of hot runner mold for PET bottle base was proposed to extend the temperature range of PET resin for better processing.
该方法为大尺寸超声塑料焊接模具的分析和设计提供了一条途径。
The approach offers a new way for the analysis and design of different large size ultrasonic dies.
对塑料件侧向抽芯的特点进行总结。正确选择侧向抽芯方法是注射模设计的关键。
The side core - pulling constituted a key factor in the design of injection molds.
论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
The molding method, process, and the equipment of thermoset runnerless injection molding have been discussed in this paper.
分析塑料模的分模技巧及纠错方法，给从事模具设计的技术人员提供一定的参考。
By analyzing the mold parting technique and the corrected skills of the plastic mold, give some reference to the technical staffs who take in the mold design.
分析塑料熔体在板模机头中的流动状况，并给出板模机头模唇设计方法。
The flow condition of plastic melt in the extrusion die is analysed in this paper, and the design method of the die lip-length for plastic plate extrusion is also given.
论述了塑料注塑模直浇口式主流道参数的设计与计算方法，倾斜式主流道的形式、尺寸选取，最后举例说明了倾斜式主流道的应用。
The design and the calculation methods of the parameter of the routine main sprue and the style and the dimension selections of the leaning main sprue are discussed.
介绍了将谐波传动中柔轮与输出轴做成整体塑料件的设计方法，并验证了其可行性。
The design which combines a flexible wheel and output shaft into a integrative part in a plastic harmonic transmission is introduced. The feasibility of this method is validated.
结合已建成的工程实例介绍了使用薄壁塑料盒作为填充体的蜂窝式空心无梁楼盖的结构型式及其设计计算方法，并提出了该类空心无梁楼盖板的挠度计算方法。
Structural type, design and calculation method of cellular voided flat slab with plastic boxes embedded in a underground garage were presented, calculating method of the deflection was proposed.
我们近来的包装方法是把每一件羊毛衫都先装在一个透明的塑料袋中，然后装在一个设计精美的纸盒子里。
Our packing now is wrapping each sweater in a transparent plastic bag first and then packing it in a samll box which is exquisitely designed.
定型模是挤出模具的重要组成部分，采用数值模拟方法研究定型模内塑料异型材的冷却过程，可以指导定型模冷却系统的设计。
Shaped mould is the important part of extrusion die for injection moulding. The cooling process of shaped plastic in shaped mould was studied using numerical simulation.
定型模是挤出模具的重要组成部分，采用数值模拟方法研究定型模内塑料异型材的冷却过程，可以指导定型模冷却系统的设计。
Shaped mould is the important part of extrusion die for injection moulding. The cooling process of shaped plastic in shaped mould was studied using numerical simulation.
应用推荐