塑料芯片,你能确保该电子驾驶屏幕集成在屏幕本身。
With plastic chips you can ensure that the electronics driving the screen are integrated in the screen itself.
目前,这种生物探测仪是一个大小为25平方毫米的塑料芯片,有一个弯曲的流水线从中穿过。
Currently the biosensor is a 25-millimeter-square plastic chip that has a meandering flow line running through it.
出于上述原因,工程师长久以来一直梦想用一种更便宜以及更易弯曲的材料来打造芯片——比如说,塑料。
For all these reasons, then, engineers have long dreamed of building chips out of something cheaper and more bendy-plastic, say.
凯尼没有去做模具,而是开发出一种技术,直接利用Shrinky Dinks塑料卡片制作出微流体芯片。
Instead of just making molds, Khine ultimately developed a technique to make microfluidics chips directly from Shrinky Dink plastic.
直接借助ShrinkyDink塑料卡片给她的灵感,米歇尔·凯尼开发出一种制作微流体芯片的技术。
Khine developed a technique to make microfluidics chips directly from Shrinky Dink plastic.
当然了,塑料微处理器将不会作为计算机微处理器去取代硅芯片。
Plastic microprocessors are not, of course, going to replace silicon chips as the microprocessors in computers.
仔细观察一下(芯片)包,你会发现它们实际上就是由一层层塑料膜构成的,有的上面涂上了颜色,有的上面镀上金属,防止材料被腐蚀。
If you look at a (chip) packet, what you've got is a plastic film, a few layers of inks and a printed metal layer to keep the materials fresh.
怀特赛兹教授的“纸芯片”相对于其他“芯片级实验室”方案来说要更加简便,其他的方案大多需要复杂的生产工艺并使用了诸如玻璃、塑料那样笨重的材料。
Whitesides' paper chips are much simpler than other lab-on-chip projects, many of which require intricate production methods and heavier materials such as glass and plastic.
在实际使用中,Genoe博士需要两块芯片来建造他的塑料微处理器。
In practice, Dr Genoe needs two chips to make his plastic microprocessor.
智能卡是一张含有计算机芯片的小型塑料卡。
A smart card is a small plastic card containing a computer chip.
去除塑料包封层,露出芯片表面,是DPA(破坏性物理分析)及FA(失效分析)的关键一步。
It is a crucial step for destructive physical analysis (DPA) and failure analysis (fa) to remove the plastic package for the die exposing.
利用这种方法制作了塑料基的DNA提取芯片,并将该芯片应用于从人血中提取DNA。
Using this method, plastic based DNA extraction chips were fabricated, and the chips were applied to extract DNA from human blood.
塑料微流控芯片热压键合设备已经投入自动化生产,生产的芯片质量、精度、重复性和一致性良好。
The hot embossing and bonding machines have been used practically in microfluidic chip automatic fabrication, and the chips have satisfactory quality, precision, repetition and consistency.
塑封的芯片通常是由优良玻璃和塑料两者的混合物制造的。
Plastic Electronic Components are typically made with a mix of fine glass and plastic.
加速度计的敏感元及测量专用芯片(ASIC) 集成在DIL塑料封装内,其引脚可用于表面安装和回流焊接。
The sensing element and the measuring ASIC are assembled in a dual-in-line (DIL) plastic package with pins for surface mount and re-flow soldering.
诊断使用的廉价微流芯片诊断设备:用塑料注塑成型该微流控芯片是廉价生产。
Diagnostic device: Made using plastic injection molding, this microfluidic chip is inexpensive to produce.
表面微加工工艺采用两种晶体硅芯片基板作为赖以建立层的基础,或者可以在更便宜的玻璃或塑料基板启动。
The surface micromachining process uses either crystal silicon chip substrates as a foundation upon which to build layers, or can be started on cheaper glass or plastic substrates.
采用聚合物如塑料等制作微流控芯片是拓展芯片应用,实现芯片产业化的关键。
Using plastic in fabrication microfludic chips and realizing automating is the key to extend the applications. Temperature is one of the important parameters in hot embossing.
COF是一种高性能、多芯片封装工艺技术,在此封装中把芯片包入模塑塑料基板中,通过在元器件上形成的薄膜结构构成互连。
COF is a high performance, multichip packaging technology in which dies are encased in a molded plastic substrate and interconnects are made via a thin-film structure formed over the components.
COF是一种高性能、多芯片封装工艺技术,在此封装中把芯片包入模塑塑料基板中,通过在元器件上形成的薄膜结构构成互连。
COF is a high performance, multichip packaging technology in which dies are encased in a molded plastic substrate and interconnects are made via a thin-film structure formed over the components.
应用推荐