泡孔尺寸不仅影响着材料的屈服强度和塑性模量等，还影响着材料的应变率敏感性。
Cell-size has a significant effect not only on the crushing stress and plastic modulus of aluminum foam, but also on the strain-rate sensitivity of material of this kind.
弹性模量是塑性混凝土的一项重要力学性能指标。
The elastic modulus is one important mechanical performance index of plastic concrete.
鉴于低模量、中高强度和良好塑性、韧性是医用合金作为外科植入物和矫形器械使用的重要先决条件。
The low modulus of elasticity, higher tensile strength, good plasticity and toughness are the most important premise for surgical implants and orthopedic devices.
在宏观尺度上，弹性模量和塑性参数，包括对塑性孔隙塌陷机理和塑性剪切机理，被表达成水饱和度的函数。
On the macroscopic scale, the elastic modulus and the plastic parameters for both pore collapse and plastic shearing processes are expressed as functions of water saturation degree.
在这个计算中，采用了流体——弹塑性变模量模型，使用了拉格朗日坐标有限差分方法和人造粘性，获得了冲击波、空腔和波形参数，并分析了这些参数。
In this computation a fluid-elastic plastic model and a finite difference method of Lagrange coordinate are used The parameters of shock, cavity and waveform are obtained and analysed.
弹性模量和塑性参数受溶解过程的影响。
The elastic modulus and the plastic properties are affected by the dissolution process.
低模量高性能热塑性弹性体的食物遵守特异性。它适用于挤出和注塑成型工艺。
A low modulus high performance thermoplastic elastomer with food compliance specificity. It is suitable for extrusion and injection molding processes.
在试验的基础上分析了塑性混凝土弹性模量采用不同标距的两种测试方法，得出了测试塑性混凝土弹性模量较为理想的方法。
On the base of tests, two kinds of measuring methods adopting different standard distance of the elastic modulus of plastic concrete have been analyzed and a more reasonable method has been found.
对于泡沫纯铝，孔径对屈服强度及塑性硬化模量基本没有影响。
As for pure aluminum foam, there is neglected effect of cell size on the strength and plastic modulus.
运用弹塑性有限元法，研究了胶粘剂弹性模量对含间隙的铝合金单搭接接头上应力分布的影响。
The effect of elastic modulus of adhesive on the str ess distribution in aluminium alloy single lap joint was investigated using elastic-plastic finite element method(FEM).
由于金刚石的硬度与弹性模量极高，在烧结时很难发生塑性变形。
Because of the excellent hardness and elastic module of diamond, it is difficult to get plastic deformation when sintering.
应用参变量变分原理推导了复合模量在弹性及塑性状态下的解析解。
The analytical solutions of composite modulus in both elastic and plastic conditions are deduced by applying parametric variational principle.
它一般不能用物理指标或弹性塑性理论模型方法确定其承载力与变形模量。
Generally its bearing capacity and deformation modulus cannot be determined by the physical parameters or by the method of elastic - plastic theoretical models.
依广义正交法则，由状态势和耗散势函数推导出了耦合损伤的弹塑性切线模量。
According to the generalized normality rule, the tangent stiffness operator of elastoplastic material coupled with damage is derived from the state potential and the dissipative functions.
因此，建议采用理想弹塑性模型的强度折减法确定安全系数，采用变模量弹塑性模型强度折减法确定变形场。
It is proposed that the ideal elastoplastic model can be used to determine the safety factor, and the variable modulus elastoplastic model to calculate the deformation field.
塑性混凝土与砂石地基结合性好，弹性模量低，用作防渗墙具有较好的变形性能。
For plastic concrete, due to its stronger adherence to sand and stone base and its lower elastic modulus, and its better deformation performance, it is used in cutoff wall.
粗晶组织阶段，强度很低，但塑性和弹性模量有较大程度提高。
The strength of the alloy foils with coarse grain microstructure was low, but the plasticity and elastic modulus were greatly improved.
提出了轮盘进入塑性状态的鉴别方法、在塑性状态下求出割线模量和横向变形系数的方法等。
The method for identification of plastic state of the disk, as well as the approach to obtaining the secant module and transverse deformation coefficient are presented.
低模量高性能热塑性弹性体的食品级特异性。
A low modulus high performance thermoplastic elastomer with food compliance specificity.
低模量高性能热塑性弹性体的食物遵守特异性。
A low modulus high performance thermoplastic elastomer with food compliance specificity.
低模量高性能热塑性弹性体的食物遵守特异性。
A low modulus high performance thermoplastic elastomer with food compliance specificity.
应用推荐